The hot compaction behaviour of woven oriented polypropylene fibres and tapes. I. Mechanical properties

The aim of this work was to establish the important parameters that control the hot compaction behaviour of woven oriented polypropylene. Five commercial woven cloths, based on four different polypropylene polymers, were selected so that the perceived important variables could be studied. These include the mechanical properties of the original oriented tapes or fibres, the geometry of the oriented reinforcement (fibres or tapes), the mechanical properties of the base polymer (which are crucially dependant on the molecular weight and morphology), and the weave style. The five cloths were chosen so as to explore the boundaries of these various parameters, i.e. low and high molecular weight: circular or rectangular reinforcement (fibres or tapes): low or high tape initial orientation: coarse or fine weave.A vital aspect of this study was the realisation that hot compacted polypropylene could be envisaged as a composite, comprising an oriented ‘reinforcement’ bound together by a matrix phase, formed by melting and recrystallisation of the original oriented material. We have established the crucial importance of the properties of the melted and recrystallised matrix phase, especially the level of ductility, in controlling the properties of the hot compacted composite.     

准噶尔盆地侏罗系储集层的基本特征及其主控因素分析

从描述储集层基本特征、分析储集层性质的主控因素、建立储集层成因模式和评价、预测储集层性质这 4个层次 ,研究准噶尔盆地重点勘探目标区的侏罗系储集层。系统总结侏罗系储集层岩石学特征 ,认为成岩压实作用强弱是控制储集层性质的关键因素 ;指出相对优质储集层均为剩余原生粒间孔隙型储集层 ,溶蚀作用对渗透率贡献小 ;非煤系储集层的孔隙保存条件明显比煤系储集层好 ,这是三工河组、头屯河组和吐谷鲁群的物性普遍优于八道湾组和西山窑组的原因。在确定储集层性质的控制因素和控制机理基础上 ,建立了煤系和非煤系两大类储集层的成因 演化模型。在上述研究的基础上 ,分地区、分层位评价了储集层 ,并预测了不同渗透率储集层的深度界线及相对优质储集层的平面分布。图 6参 10     

压密注浆及其在地基加固中的应用

在简单介绍了压密注浆工法的加固机理、影响被加固土体强度的因素的基础上，结合工程实例介绍了压缩注浆工法的工程应用情况。     

Clay compaction modelling by homogenization theory

The modelling of hydromechanical behavior of clayey sediments by homogenization theory is described. The rheological model of clays buried in depth requires a three-dimensional approach and laboratory experiments to quantify the model parameters. An iterative process which can be coupled to any homogenization method is used to model the porous media behavior. Hydromechanical compaction results from oedometric experiments are simulated with the proposed model.     

Testing of multi-output circuits by means of signature analyzer

Let a circuit havem outputs,m>1. There are two ways to test this circuit by means of a signature analyzer: use a single input analyzer for each output or use anm-input analyzer to test all outputs simultaneously. The main goal of this letter is to demonstrate that for fault output sequences with small multiplicity of errors and long length the second approach is more effective.     

膨胀岩工程特性试验研究

为研究南水北调中线工程膨胀岩的工程特性,选取新乡潞王坟段的代表性岩层——强风化黏土岩和泥灰岩的原状样及扰动样,进行了物理性质试验、击实试验、力学性质试验以及膨胀特性试验。试验成果表明:对扰动样的标准击实基本上很难达到天然状态下的干密度状态,土体的结构性在击实过程中不能得到较好的恢复;初始含水率越小,吸湿能力越大,其强度降低程度越大,饱和强度参数越小;含水率低的试样,其破坏强度大,但破坏应变小;相同的压实度下,含水率越低试样的软化现象越明显;相同压实度的土样,含水率越大,其初始切线模量越小;压实度在90%~98%,压实度越大,膨胀力与膨胀率越大;随着压实度超过98%,膨胀率与压实度关系曲线存在一峰值转折点,而且此峰值点出现在压实度为98%~100%。压力与膨胀率关系曲线分两直线段:一陡降段和一平缓段,各曲线之间近似平行,曲线截距为无荷膨胀率数值。该成果为南水北调中线工程膨胀岩渠坡段的设计施工提供了科学依据。     

Efficient and accurate approach for powder compaction problems

 In this paper, a new approach for powder cold compaction simulations is presented. A density-dependent plastic model within the framework of finite strain multiplicative hyperelastoplasticity is used to describe the highly nonlinear material behaviour; the Coulomb dry friction model is used to capture friction effects at die-powder contact; and an Arbitrary Lagrangian–Eulerian (ALE) formulation is used to avoid the (usual) excessive distortion of Lagrangian meshes caused by large mass fluxes. Several representative examples, involving structured and unstructured meshes are simulated. The results obtained agree with the experimental data and other numerical results reported in the literature. It is shown that, contrary to other Lagrangian and adaptive h-remeshing approaches recently reported for this type of problems, the present approach verifies the mass conservation principle with very low relative errors (less than 1% in all ALE examples and exactly in the pure Lagrangian examples). Moreover, thanks to the use of an ALE formulation and in contrast with other simulations, the presented density distributions do not present spurious oscillations. Received: 20 March 2002 / Accepted: 15 October 2002 The partial financial support of the Ministerio de Ciencia y Tecnología (grant number DPI 2001-2204) is gratefully acknowledged.     

泥岩压实动态分析法定量评价石油初次运移

在分析影响油气初次运移主要因素的基础上，剖析应用泥岩压实静态分析方法研究油气初次运移的局限性，提出应用泥岩压实动态分析方法定量评价油气初次运移的观点，并建立了相应的地质模型、数学模型和模拟流程。以栓辽盆地乾长凹陷为例，对主要烃源层青山口组进行压实动态分析，并估算其油气初次运移量，计算结果与其它多种方法计算结果以及前人计算结果十分接近。     

振冲法在砂场地地基处理中的应用

通过对典型振冲挤密法施工方法的研究，分析了该方法的加固机理，指出它可提高地基承载力、减少沉降和不均匀沉降，且能达到地基抗地震、抗液化能力的效果。     

粉末冶金温压工艺的研究进展及其展望

综述了粉末冶金温压工艺的研究进展,概述了温压工艺的粉末原料、聚合物、温度、压力、烧结环节对温压工艺的影响和温压工艺的致密化机理。详细介绍了温压工艺的新进展—流动温压、高压温压等,并对其应用前景进行了展望。