A numerical study of dynamic behaviors of a unitized regenerative fuel cell during gas purging

The gas purging states affect electricity output and energy storage capacity of unitized regenerative fuel cells. In this study, a model of unitized regenerative fuel cell is established. Cell voltages and operating temperatures influences on the dynamic distribution of thermal fluid during purging process and the discharge of residual liquid water in electrolytic cell mode are investigated. The motivation of the present study is better understanding the gas purging characteristics and its effect on reaction behaviors of unitized regenerative fuel cells. Simulation results reveal a significant influence of purging gas temperature on the water flooding and a great effect of operating voltage on the water diffusion. The operating temperature of electrolytic cell model almost has little effect on purging results at different cell temperature and the same purging gas temperature. When the purging gas temperature is changed, higher temperatures of cell and purging gas facilitate liquid water discharging out from the cell regions. In cell water flooding situation, when having large liquid content, the purging gas has little effects on the water expelling process.     

Prediction of mode I fracture toughness of rock using linear multiple regression and gene expression programming

Prediction of mode I fracture toughness (K_IC) of rock is of significant importance in rock engineering analyses. In this study, linear multiple regression (LMR) and gene expression programming (GEP) methods were used to provide a reliable relationship to determine mode I fracture toughness of rock. The presented model was developed based on 60 datasets taken from the previous literature. To predict fracture parameters, three mechanical parameters of rock mass including uniaxial compressive strength (UCS), Brazilian tensile strength (BTS), and elastic modulus (E) have been selected as the input parameters. A cluster of data was collected and divided into two random groups of training and testing datasets. Then, different statistical linear and artificial intelligence based nonlinear analyses were conducted on the training data to provide a reliable prediction model of K_IC. These two predictive methods were then evaluated based on the testing data. To evaluate the efficiency of the proposed models for predicting the mode I fracture toughness of rock, various statistical indices including coefficient of determination (R²), root mean square error (RMSE), and mean absolute error (MAE) were utilized herein. In the case of testing datasets, the values of R², RMSE, and MAE for the GEP model were 0.87, 0.188, and 0.156, respectively, while they were 0.74, 0.473, and 0.223, respectively, for the LMR model. The results indicated that the selected GEP model delivered superior performance with a higher R² value and lower errors.     

定子分段式永磁直线同步电机速度波动抑制方法研究

为了解决定子分段式永磁直线同步电机(PMLSM)存在的因磁阻效应、负载阻力、摩擦力、参数摄动以及动子进出定子时耦合面积变化所造成的控制性能下降的难题,根据动子和定子的耦合状态,提出一种在完全耦合阶段和动子退出定子阶段的分段式控制方法。首先,在动子与定子完全耦合阶段采用改进滑模控制器减小推力波动导致的速度波动,再通过加入扰动观测器降低滑模切换项所带来的抖振现象;在动子退出定子阶段,建立相关电磁参数与动子位置的函数关系,实时补偿由耦合面积变化引起的动子失速,使动子速度在退出时接近给定值。仿真及实验结果表明动定子完全耦合过程中的速度稳态误差为0.005 m/s,收敛时间为0.3 s,动子退出定子阶段的速度波动不超过0.04 m/s,满足定子分段式PMLSM用于长行程自动运输系统对平稳性及快速性的需求。     

Damping and mode shape modification for additively manufactured walls with captured powder

This paper describes the fabrication, modeling, and dynamic testing of laser powder bed fusion stainless steel walls with captured powder cores. The purpose of the study is to determine the increased structural damping, or energy dissipation, and mode shape modification caused by the inclusion of the unmelted powder core within the solid walls. It is shown experimentally that the damping increases with larger powder core width and that the damping addition is mode dependent. Damping increases over the solid wall values by factors of 2.9–225 are reported depending on the mode number and core width. It is also seen that the mode shapes are distorted relative to the solid wall results as the core width is increased and wall thickness is decreased. Comparisons with finite element models confirm this trend.     

Clean hydrogen production in a full biological microbial electrolysis cell

The recent interest in microbial electrolysis cell (MEC) technology has led the research platform to develop full biological MECs (bioanode-biocathode, FB-MEC). This study focused on biohydrogen production from a biologically catalyzed MEC. A bioanode and a biocathode were initially enriched in a half biological MFC (bioanode-abiocathode, HB-MFC) and a half biological MEC (abioanode-biocathode, HB-MEC), respectively. The FB-MEC was established by transferring the biocathode of the HB-MEC and the bioanode of the HB-MFC to a two-chamber MEC. The FB-MEC was operated under batch (FB-MEC-B) and recirculation batch (FB-MEC-RB) modes of operation in the anodic chamber. The FB-MEC-B reached a maximum current density of 1.5 A/m² and the FB-MEC-RB reached a maximum current density of 2.5 A/m² at a similar applied voltage while the abiotic control system showed the maximum of 0.2 A/m². Hydrogen production rate decreased in the FB-MEC compared to that of the HB-MEC. However, the cathodic hydrogen recovery increased from 42% obtained in the HB-MEC to 56% in the FB-MEC-B and 65% in the FB-MEC-RB, suggesting the efficient oxidation and reduction rates in the FB-MEC compared to the HB-MEC. The onset potential for hydrogen evolution reaction detected by linear sweep voltammetry analysis were −0.780 and −0.860 V vs Ag/AgCl for the FB-MEC-RB and the FB-MEC-B (−1.26 for the abiotic control MEC), respectively. Moreover, the results suggested that the FB-MEC worked more efficiently when the biocathode and the bioanode were enriched initially in half biological systems before transferring to the FB-MEC compared to that of the simultaneously enriched in one system.     

In-fibre LP11–LP21 mode conversion using force-induced long-period fibre gratings with polarization controllers

ABSTRACT

Mode conversion between higher-order modes is attained in a step-index four mode fibre using an in-line polarization controller followed by a force-induced long period fibre grating. By adjusting the field orientation of the LP₁₁ mode to the antisymmetric fibre grating, the LP₁₁ mode is converted to the LP₂₁ mode with a spatially periodic force of 50 N along the fibre length of 50?mm. The mode conversion is evaluated by observing the far-field and near-field patterns of the fibre output and by comparing the transmitted optical power with and without the additional two-mode fibre. The phase-matching grating period is required of the accuracy of roughly ±5?μm and the radiation loss during the mode conversion is as low as 0.01?dB.     

公路主枢纽货运站场向物流园区转化的可能与模式

公路主枢纽货运站场具有向物流园区转化的基本条件.已建成、在建或规划中的各公路主枢纽货运站场可结合站场现有的区位、设施、能源和土地等条件,采取不同模式,实现向物流园区转化的目标.     

Variability in seismic response of secondary systems due to uncertain soil properties

A mode acceleration formulation is presented to investigate the variability in the response of a secondary system which is supported on a flexible-base primary system at multiple attachment points. The response functions are considered to be uncertain due to uncertainties in the values of shear wave velocity and Poisson’s ratio of the foundation soil. Both soil parameters are assumed to be statistically independent variables with Gaussian distributions. A numerical study with the help of an example primary-secondary (P–S) system shows that dynamic response should be ignored only for very stiff secondary modes, say > 7 times as stiff as the dominant mode of the primary system, for the proposed formulation to work well. It is also seen that uncertainty in shear wave velocity can be ignored in case of limited soil-structure interaction, while uncertainty in Poisson’s ratio should be considered only when soil damping is sensitive to the Poisson’s ratio and there is significant soil-structure interaction.     

组合砖墙在垂直荷载作用下的受力分析

本文针对目前在砖墙结构中常采用构造柱和圈梁而形成的一种共同受力结构提出了一种力学概念明确的力学模型，并对本文导出的公式和现有基于试验总结出的经验公式进行比较（１），结果表明，用两种方法计统的结果具有较好的一致性。     

张拉体系的几何构造分析

本文对张拉结构的力学特点进行了较为全面的介绍和相关内容的比较。张拉结构的平衡矩阵内容丰富 ,含括了特定结构的节点和杆件数目、结构拓扑条件以及其Euclidean几何定义等关于结构分析的诸多内容。通过对这一矩阵的分析 ,可以对张拉结构的几何构造以及预应力 (分布 )对张拉结构的几何稳定性 (刚度 )的影响两方面的问题有深入的认识