气藏采收率影响因素研究与启示——以靖边气田A井区为例

以鄂尔多斯盆地靖边气田A井区为例，采用单因素相关分析和数值模拟方法，对比研究了井网控制程度、储层物性及地层废弃压力对气藏采收率影响及其主次关系。结果表明，井网控制程度是影响采收率的首要因素，井网控制程度每增加10%，采收率提高8.5%；渗透率是影响采收率的重要因素，渗透率每增加10%，采收率平均增加6%；废弃压力对采收率亦有较大影响，废弃压力每降低10%，采收率可提高1.6%。三者对采收率影响综合排序为：井网控制程度>储层物性>废弃压力。分析认为，渗透率是储层固有属性，很难从根本改变；而废弃压力受井口外输压力和增压开采成本制约，降低幅度有限。因此，优化井网及增加井网控制程度是提高气藏采收率的有效途径。研究成果具有实践意义，可为改进气田开发方式和提高气藏采收率提供参考。     

空调中分布型主动式热回收系统的分析

利用水或乙二醇对空调系统中的余热进行回收,加热空调系统进口新风,使除湿后的新风达到升温的目的。通过余热利用降低加热新风所需要的燃料,减少了二氧化碳的排放。分析讨论了瑞士Konvekta分布型主动式热回收产品的工作原理、使用效果及发展前景。     

Impact of 5-hydroxy methyl furfural on continuous hydrogen production from galactose and glucose feedstock with periodic recovery

A continuous stirred tank reactor (CSTR) was operated for more than 120 days with fixed hydraulic retention time of 6 h at mesophilic temperature along with a periodic recovery phase towards hydrogen production and stimulated by the existence of 5-hydroxy methyl furfural concentration (5-HMF). Interestingly, CSTR mixed with a small amount of 5-HMF, range of 0.3–0.6 g/L showed at least 50% higher hydrogen production rate than control without 5-HMF. However, when 5-HMF concentration was higher than 0.6 g/L, the performance was significantly inhibited. The bacterial community shifted by 5-HMF from Clostridium-dominated to Lactobacillus-dominated population. Regardless of the remain 5-HMF concentration in CSTR, the microbial community and hydrogen producing performance were restored by stop mixing the 5-HMF from the feedstock. The high-rate hydrogen production of 20.0 ± 1.8 L H₂/L/d was achieved in the presence of 5-HMF using the threshold information and recovery strategy.     

四川某稀土矿选矿试验研究

针对四川某稀土矿选矿工艺存在的稀土回收率低的问题，开展了一系列选矿试验研究。试验结果表明，在矿浆质量浓度为30%，粗选NaOH用量为600g/t，水玻璃用量为3000g/t，EF1106用量为3500g/t，起泡剂用量为60g/t情况下，采用一粗、三精、两扫、中矿按顺序返回的选矿流程，可获得稀土REO的品位和回收率分别为66.32%和79.88%的稀土浮选精矿。与该选厂的生产指标相比，稀土回收率提高了13.93%。     

Recovery of polyphenols from camu-camu (Myrciaria dubia H.B.K. McVaugh) depulping residue by cloud point extraction

In this study the potential of cloud point extraction formed by a non-ionic surfactant was used in order to separate polyphenols from industrial residues of camu-camu. The effects of operational conditions of the cloud point extraction (CPE) on the polyphenol recovery and volumetric ratio were investigated. The results showed a maximum recovery of 95.71% that was obtained using 7.0 wt% Triton X-114, native pH (3.25), and 80 wt% polyphenol extract at 30 °C. The use of cloud point extraction was successful to recover the polyphenols from agroindustrial residue since it is a simple as well as of low-cost technique.     

Mechanochemical sulfidization of a mixed oxide-sulphide copper ore by co-grinding with sulfur and its effect on the flotation efficiency

Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO₃)₂ and Fe(NO₃)₃ salts and iron, aluminum and magnesium powders was investigated for the first time. Also, the influence of sulfidization during the wet-milling process was examined on the separation efficiency and recovery of copper in detail. The results demonstrated that co-grinding with sulfur solely had the best flotation performance at the value of 0.5 wt.% and it was attributed to the possible existence of S-O bonding on copper oxides surfaces. In addition, adding magnesium nitrate salt, magnesium powder, iron nitrate salt and aluminum powder as additive associated with 0.5 wt% sulfur into ball milling caused the flotation improvement at the amounts of 0.2 wt%, 0.2 wt%, 0.5 wt% and 0.5 wt%, respectively. Also, the effect of grinding time and sulfidization pH with 0.5 wt% sulfur solely was determined and pHs of 7.5 to 8.5 gave the best results. The highest recovery (75.76%) and separation efficiency (63.44%) were achieved at pH of 7.5 and 8.5, respectively.     

铜浮选专家控制系统设计与应用

针对国内某选矿厂铜浮选工艺泡沫速率不稳定,精矿品位波动大,回收率不理想等特点,设计了一套浮选专家控制系统,该系统结合泡沫影像分析技术,在线品位分析技术,PID控制与模糊逻辑控制技术。系统架构简明合理,逻辑层次清晰有效,投入运行一段时间后,在不同原矿品位前提下,都能实现稳定泡沫速率,减少精矿品位波动,提高回收率等指标优化,同时药剂添加量也有明显减少。这表明该系统运行效果良好,值得应用推广。     

老矿山残矿资源回收方案设计中三维探测及建模技术的应用

目前我国绝大多数中小型老矿山残矿回收面临一系列问题，包括资料缺失无法准确判定老采空区及剩余资源位置，无法准确掌握剩余资源形态及可回收量，回收方案设计与实际资源相差较大等。通过将三维探测及建模技术应用于老矿山残矿资源精准定位及回收方案设计中，有助于解决以上问题。以福建浦城屏峰硫铅锌矿为例，通过对老采空区采用三维激光扫描构建采空区三维模型，结合三维建模计算，构建了目前可回收的剩余资源三维模型。通过模型划分及切割，按照矿体实际形态，在三维模型中布设采切及穿孔工程，并将其导入平面施工图中，不仅可以减少设计工作量，而且能够精准匹配矿体，减少设计偏差。由于周边存在大量老采空区，为保障安全，在采空区及剩余资源精准三维模型的基础上，制定了采空区稳定性监测方案，布设了监测传感器，保障了资源回收安全。     

致密油藏注天然气提高采收率研究现状

随着我国石油需求量不断增加,致密油藏的开发也愈发重要。如何高效开发致密油藏是一项重点难点,其中致密油藏注天然气提高采收率是一个极具潜力的研究方向。因此,本文着重介绍以天然气作为能量补充介质在国内外的研究现状和应用现状,并且从两相特征等方面总结了理论研究中的一些机理,对致密油藏注天然气提高采收率的发展前景进行了一定的展望。     

应用低贫化放矿的可行性浅析

鉴于鲁中冶金矿山公司现行截止品位放矿方式中存在贫化率较大的问题，提出采用提高截止品位的低贫化放矿方式，通过技术经济指标的分析计算，认为低贫化放矿技术上可行，经济上合理，在现场易于实现，具有应用价值。