| 一种新型材质轿车前悬架横梁加强件冲压工艺 |
| |
| 引用本文： | 周宇明.一种新型材质轿车前悬架横梁加强件冲压工艺[J].模具技术,2010(2). |
| |
| 作者姓名： | 周宇明 |
| |
| 作者单位： | 辽宁机电职业技术学院,机械工程系,辽宁,丹东,118002 |
| |
| 摘 要： | 分析了一种新型材质轿车前悬架横梁加强件零件材质的特点,制定了其冲压工艺。设计了拉深模并对模具进行了调试。运用Dynaform软件,分别对料片拉深和落料后拉深的冲压成形过程进行数值模拟。对比模拟结果,确定合理的工艺方案,进一步优化工艺参数和模具结构。经生产实践验证,该模具工作状态良好,冲件质量稳定。
|
| 关 键 词： | 汽车覆盖件 冲压 Dynaform |
Stamping process for automobile front suspension beam reinforcement with new material |
| |
| ZHOU Yu-ming.Stamping process for automobile front suspension beam reinforcement with new material[J].Die and Mould Technology,2010(2). |
| |
| Authors: | ZHOU Yu-ming |
| |
| Affiliation: | ZHOU Yu-ming |
| |
| Abstract: | The material properties of the automobile front suspension beam reinforcement with new material were analized,and the stamping process for the part was developed.A drawing die was designed and adjusted.Using the software Dynaform,the two sheet metal stamping processes of direct drawing and drawing after blanking were simulated.Through comparing of the simulation results,the rational process was selected,and the technical parameters and the die structure were optimized.The production practice has proved that... |
| |
| Keywords: | automobile panel stamping Dynaform |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
