| 注塑工艺对PVC-U合金性能的影响 |
| |
| 引用本文： | 刘容德,李静,张新华.注塑工艺对PVC-U合金性能的影响[J].聚氯乙烯,2010,38(2):24-28. |
| |
| 作者姓名： | 刘容德 李静 张新华 |
| |
| 作者单位： | 中国石化股份有限公司齐鲁分公司研究院,山东淄博,255400 |
| |
| 摘 要： | 研究了注塑工艺对PVC-U合金性能的影响,结果表明:在注射温度185℃、注射压力80MPa、注射速度60g/s、注射时间5s的工艺条件下,注塑制品具有较好的力学性能。
|
| 关 键 词： | PVC 注塑工艺 性能 |
Influences of injection molding process on the properties of PVC alloy |
| |
| LIU Rongde,LI Jing,ZHANG Xinhua.Influences of injection molding process on the properties of PVC alloy[J].Polyvinyl Chloride,2010,38(2):24-28. |
| |
| Authors: | LIU Rongde LI Jing ZHANG Xinhua |
| |
| Affiliation: | (Research Institute of Qilu Branch Co. , SINOPEC, Zibo 255400, China) |
| |
| Abstract: | Influences of injection molding process on the properties of PVC alloy were studied. The results showed that injection products with better mechanical properties could be obtained when the injection temperature was 185 ℃, injection pressure was 80 MPa, injection rate was 60 g/s and injection time was 5 s. |
| |
| Keywords: | PVC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
