| 曲轴磨床磨削进给和砂轮修整控制的研究与实现 |
| |
| 引用本文： | 孙开发,郭连水,王殿春.曲轴磨床磨削进给和砂轮修整控制的研究与实现[J].机床与液压,2006(2):179-180,182. |
| |
| 作者姓名： | 孙开发 郭连水 王殿春 |
| |
| 作者单位： | 1. 北京航空航天大学,北京100083
2. 北京诺盛自动化有限公司,北京100000 |
| |
| 摘 要： | 通过研究曲轴曲拐径磨床磨削进给和砂轮修整的工艺过程，对磨床进行数控系统改造，用PLC和NC相结合的方式在不改变原来PLC程序的前提下实现了砂轮修整和磨削进给的控制。
|
| 关 键 词： | FANUC 0i系统 |
| 文章编号： | 1001-3881（2006）2-179-2 |
| 收稿时间： | 2004-11-08 |
| 修稿时间： | 2004-11-08 |
Research and Realization on Grind Feed and Grinding Wheel Finishing of Crankshaft Grinder |
| |
| SUN Kaifa,GUO Lianshui,WANG Dianchun.Research and Realization on Grind Feed and Grinding Wheel Finishing of Crankshaft Grinder[J].Machine Tool & Hydraulics,2006(2):179-180,182. |
| |
| Authors: | SUN Kaifa GUO Lianshui WANG Dianchun |
| |
| Affiliation: | 1. Beihang University, Beijing 100083, China; 2. Beijing Nuosheng Automatization Corporation Ltd, Beijing 100000, China |
| |
| Abstract: | The crankshaft grinder was improved using NC system based on researching the grinding feed and grinding wheel finishing of crankshaft grinder. The control of grinding wheel finishing and grinding feed was achieved with PLC and NC on condition of retaining the former PLC programs. |
| |
| Keywords: | PLC PMC NC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
