| 中国和加拿大机械制图标准规范比较 |
| |
| 引用本文： | 杨春杰,徐超,Elvis.Pittman.中国和加拿大机械制图标准规范比较[J].机械工程师,2010(11):40-41. |
| |
| 作者姓名： | 杨春杰 徐超 Elvis.Pittman |
| |
| 作者单位： | 1. 黄石理工学院,湖北,黄石,435000
2. 加拿大北大西洋学院 |
| |
| 摘 要： | 文中对中国和加拿大在投影角度、图幅、线型、单位等机械制图标准的不同进行比较,有利于中加两国间机械制图的学习和交流。
|
| 关 键 词： | 机械制图 标准规范 比较 |
The Differences in the Standards of Engineering Graphic in China and Canada |
| |
| YANG Chun-jie,XU Chao,Elvis.Pittman.The Differences in the Standards of Engineering Graphic in China and Canada[J].Mechanical Engineer,2010(11):40-41. |
| |
| Authors: | YANG Chun-jie XU Chao ElvisPittman |
| |
| Affiliation: | YANG Chun-jie,XU Chao,Elvis.Pittman(1.Huangshi Institute of Technology,Huangshi 435000,China;2.College of the North Atlantic in Canada) |
| |
| Abstract: | This paper compared the differences between the standards of engineering graphic in China and Canada,such as projection angle,format,lines type and unit etc.It had benefit to the communication and study in engineering graphic of China and Canada. |
| |
| Keywords: | engineering graphic standards comparison |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
