首页 | 本学科首页   官方微博 | 高级检索  
     

共沉淀法制备Al_2O_3-YAG复相陶瓷及其显微结构研究
引用本文:王宏志,高濂,李炜群,Koichi Niihara.共沉淀法制备Al_2O_3-YAG复相陶瓷及其显微结构研究[J].无机材料学报,2001,16(1).
作者姓名:王宏志  高濂  李炜群  Koichi Niihara
作者单位:1. 中国科学院上海硅酸盐研究所
2. 日本大阪大学产业科学研究所,
摘    要:用共沉淀法制备了Al2O3-YAG复合粉体,YAG的结晶温度在1000℃左右.共沉淀法 制备的Al2O3-YAG复合粉体经1550℃热压烧结,获得致密烧结体,YAG的加入量对烧结温度 的影响不大. Al2O3-5vol%YAG复合材料的抗弯强度为604MPa,断裂韧性为5.0MPam1/2; Al2O3-25vol%YAG复合材料的抗弯强度为611MPa,断裂韧性为45MPam1/2.所有这些数据 都高于单相Al2O3陶瓷的力学性能,说明YAG的加入有利于A12O3陶瓷力学性能的提高. 通过显微结构观察发现:大的YAG颗粒位于Al2O3晶界上,小的YAG颗粒位于Al2O3晶粒 内.在 Al2O3-5vol%YAG复合材料中,许多小的白色区域存在于 Al2O3晶粒内,这可能和较低 的Y2O3含量有关.

关 键 词:YAG  共沉淀  复合材料  显微结构

Preparation and Microstructure of Al_2O_3-YAG Composites
WANG Hong-Zhi,GAO Lian,LI Wei-qun,Hirokazu Kawaoka,Koichi Niihara.Preparation and Microstructure of Al_2O_3-YAG Composites[J].Journal of Inorganic Materials,2001,16(1).
Authors:WANG Hong-Zhi  GAO Lian  LI Wei-qun  Hirokazu Kawaoka  Koichi Niihara
Abstract:Polycrystalline Al2O3-YAG composites were obtained by using the coprecipitation method. After calcining at different temperatures, the crystallization of YAG was found at about 1000C. Dense bodies could be got by hot-pressing at 1550C. Bending strength and fracture toughness of Al2O3-5vol%YAG and Al2O3-25vol%YAG composites were 604 MPa and 5.0MPa1/2, 611MPa and 4.5MPa1/2 respectively. It indicated that the incorporation of YAG improved the mechanical property of Al2O3 ceramics. Through TEM observation, large YAG particles (about 1mm) located on the grain boundaries of Al2O3 were seen, and some small YAG particles (100200nm) was among Al2O3 grains in both composites. A lot of white areas were found in Al2O3-5vol% YAG composite, which maybe result from the low concentration of yttrium.
Keywords:YAG  coprecipitation  composites  microstructure
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号