首页 | 本学科首页   官方微博 | 高级检索  
     

高速开关磁阻电机数字控制器设计与FPGA验证
引用本文:陈海进,蒋冬青,孙思兵.高速开关磁阻电机数字控制器设计与FPGA验证[J].微电机,2007,40(8).
作者姓名:陈海进  蒋冬青  孙思兵
作者单位:1. 东南大学国家专用集成电路系统工程技术研究中心,南京,210096;南通大学江苏省专用集成电路设计重点实验室,南通,226007
2. 南京航空航天大学自动化学院,南京,210016
基金项目:江苏省高技术研究发展计划项目
摘    要:针对三相6/2结构开关磁阻电机,采用数字集成电路的方法设计了一种通用数字控制器,转速控制范围为60r/min~45000r/min。设计采用Verilog HDL语言,完成逻辑仿真后,综合、下载到FPGA芯片,并与MSP430F147微处理器构成控制系统对电机进行控制。控制系统设计简单。试验结果表明,设计的数字控制器可有效满足高速开关磁阻电机的控制要求。

关 键 词:开关磁阻电机  数字控制器  调速系统

Design and Verification of Digital Controller Used for High Speed Switched Reluctance Motor
CHEN Hai-jin,JIANG Dong-qing,SUN Si-bin.Design and Verification of Digital Controller Used for High Speed Switched Reluctance Motor[J].Micromotors,2007,40(8).
Authors:CHEN Hai-jin  JIANG Dong-qing  SUN Si-bin
Abstract:This paper presents a specialized digital controller used for 3-phase 6/2 switched reluctance motor(SRM).A speed range of from 60r/min to 45000r/min was achieved by using this specialized controller.Verilog HDL was used as the design entry.After logic simulation and synthesis,the design was successfully verified by downloading it into FPGA,and cooperated with the MSP430F147 microprocessor in a switched reluctance drive(SRD) system.The results show that it can meet the controlling requirement of high speed SRM,and simplify the SRD system.
Keywords:FPGA
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号