| 板料多步冲压回弹的数值模拟研究 |
| |
| 引用本文： | 陈炜,王晓路,高霖.板料多步冲压回弹的数值模拟研究[J].塑性工程学报,2005,12(5):8-11,16. |
| |
| 作者姓名： | 陈炜 王晓路 高霖 |
| |
| 作者单位： | 1. 江苏大学,模具技术研究所,镇江,212013
2. 南京航空航天大学,机电学院,南京,210016 |
| |
| 基金项目： | 国家自然科学基金项目（50475125）和国家自然科学基金项目（50275075）资助. |
| |
| 摘 要： | 回弹是板料冲压成形过程中一种常见但很难解决的现象。首先研究了板料弯曲变形中卸载回弹的原理,然后以依维柯侧壁上内板为例,采用动态和静态算法相结合的方法,在考虑每道工序板料回弹的基础上,对其进行多步冲压回弹的数值模拟,最后对模拟结果和实验结果进行比较,验证该模拟方法提高回弹计算精度的有效性,为板料冲压成形工艺的制定提供科学依据。
|
| 关 键 词： | 回弹 多步冲压 数值模拟 |
| 文章编号： | 1007-2012（2005）05-0008-04 |
| 收稿时间： | 2005-03-07 |
| 修稿时间： | 2005-03-20 |
The numerical simulation study of springback during sheet metal multi-step forming |
| |
| CHEN Wei,WANG Xiao-lu,GAO Lin.The numerical simulation study of springback during sheet metal multi-step forming[J].Journal of Plasticity Engineering,2005,12(5):8-11,16. |
| |
| Authors: | CHEN Wei WANG Xiao-lu GAO Lin |
| |
| Abstract: | Springback is a kind of common phenomenon that is hard to solve in the stamping. The principle of springback in bending during sheet metal forming is studied firstly. Then by use of the coupled explicit-implicit solver, the sheet metal springback after every step is fully considered. So the whole multi-step forming process of the upper inner panel of Iveco is simulated successfully. Finally the simulation results and the experiment results are compared, which testify the validity of this simulation process in improving the precision of sprinback calculation, and provide the scientific means for the process design of sheet metal forming. |
| |
| Keywords: | springback multi-step forming numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
