| 脉冲电化学光整加工的流场及间隙特性 |
| |
| 引用本文： | 翟小兵,徐文骥,周锦进,李洪友.脉冲电化学光整加工的流场及间隙特性[J].电加工与模具,2003(4):22-24. |
| |
| 作者姓名： | 翟小兵 徐文骥 周锦进 李洪友 |
| |
| 作者单位： | 大连理工大学机械工程学院,辽宁大连,116023 |
| |
| 摘 要： | 通过系统的试验研究，分析了工作液流场分布、流量、加工间隙等工艺参数对加工质量的影响。研究结果表明：合理控制加工间隙和工作液流场分布，对保证加工表面的质量极为重要；在优选的工艺参数下，可快速获得优质表面。
|
| 关 键 词： | 脉冲电化学加工 复合光整加工 流场 间隙 工艺参数 加工质量 |
| 修稿时间： | 2003年3月15日 |
On characteristics of flow-field and interelectrode gap in pulse electrochemical finishing |
| |
| Zhai Xiaobing,et al..On characteristics of flow-field and interelectrode gap in pulse electrochemical finishing[J].Electromachining & Mould,2003(4):22-24. |
| |
| Authors: | Zhai Xiaobing |
| |
| Abstract: | The rules of effect of the experimental parameters of the pulse electrochemical finishing, such as the flow field, the electrolyte flow rate and the interelectrode gap on surface quality are highlighted and analyzed based on the experiments in this paper. Lots of experiments show that the surface quality can be effectively controlled and improved by analyzing and matching the above mentioned parameters and a top quality surface can be quickly obtained under the optimized parameters. |
| |
| Keywords: | pulse electrochemical finishing flow field interelectrode gap |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
