首页 | 本学科首页   官方微博 | 高级检索  
     

镍锌铁氧体/炭黑填充环氧树脂基吸波性能研究
引用本文:王学双,周少明,段玉平.镍锌铁氧体/炭黑填充环氧树脂基吸波性能研究[J].安全与电磁兼容,2009(5):77-79.
作者姓名:王学双  周少明  段玉平
作者单位:大连理工大学材料科学与工程学院;大连理工大学材料科学与工程学院;大连理工大学材料科学与工程学院
摘    要:以环氧树脂为基制备了Ni—Zn铁氧体/炭黑双层结构复合材料吸波平板,由具有良好阻抗匹配的表面层、高吸收层组成(总厚度控制在6mm之内)。采用矢量网络分析仪对其在4~18GHz频段内的吸波性能进行了测试。结果显示,随炭黑质量分数的增加,吸收层的吸波陛能呈上升趋势,在炭黑质量分数达到35%时,在4.2GHz处出现吸收的峰值,此时,优于-6.00dB的有效频宽为5.8GHz。

关 键 词:炭黑  环氧树脂  镍锌铁氧体  阻抗匹配  吸波性能

Absorbing Property of Ni-Zn Ferrites/Carbon Black Epoxide Resin Composites
Abstract:In this paper, Ni-Zn ferrites and carbon black (CB) were used as absorbent in the matching layer and the absorbing layer, respectively, and epoxy resin was used as the matrix (the total thickness of 6 mm in control). The absorbing property was tested in the frequency range of 4-18 GHz by network analyzer. The results showed that, with the increasing mass fraction of CB, the absorbing capability was on the rise. When the CB mass fraction was up to 35% , its maximal absorption peak is at 4.2 GHz. The effective absorption bandwidth could reach 5.8 GHz while the reflection loss is lower than -6 dB.
Keywords:CB  epoxy resin  Ni-Zn ferrites  impedance matching  absorbing property
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号