| 卢安夏矿巴卢巴选矿厂复产的生产实践 |
| |
| 引用本文： | 付和生,刘亚平.卢安夏矿巴卢巴选矿厂复产的生产实践[J].有色金属工程,2011,1(1):47-49. |
| |
| 作者姓名： | 付和生 刘亚平 |
| |
| 作者单位： | 北京矿冶研究总院;中色卢安夏铜业有限公司 |
| |
| 摘 要： | 针对卢安夏铜矿原有浮选工艺中存在的问题进行工艺改造。采用调整磨矿细度、改造浮选工艺流程、改变工艺参数及药剂制度等措施，在原矿含铜1.30%、含钴0.105%的情况下，铜回收率由90.75%提高到93.43%，铜精矿品位由16.88%提高到21.04%，钴精矿品位由0.90%提高到1.12%，提高了选矿技术指标。
|
| 关 键 词： | 铜矿 浮选 磨矿细度 流程改造 药剂制度 |
| 收稿时间： | 3/7/2011 12:00:00 AM |
Review on Rehabilitation of Luanshya Buluba Concentrator |
| |
| FU He-sheng and LIU Ya-ping.Review on Rehabilitation of Luanshya Buluba Concentrator[J].Nonferrous Metals Engineering,2011,1(1):47-49. |
| |
| Authors: | FU He-sheng and LIU Ya-ping |
| |
| Affiliation: | Beijing General Research Institute of Mining and Metallurgy;CNMC Luanshya Copper Mines PLC |
| |
| Abstract: | The flotation process to improve the initial one of LCM copper mine was introduced. Under the condition of 1.3% copper feed grade and 0.105% cobalt grade, with the application of a series of measures including adjusting the particle fineness of milling ore, reforming the flotation process , adjusting process parameters and improving reagent system, the copper recovery was improved from 90.75% to 93.43%, the grade of copper concentrate was raised from 16.88% to 21.04% and that ofcobalt concentrate was raised from 0.9% to 1.12%,. As a result, all flotation technical parameters were improved. |
| |
| Keywords: | copper mine flotation milled particle fineness process reform reagent administration |
|
| 点击此处可从《有色金属工程》浏览原始摘要信息 |
|
点击此处可从《有色金属工程》下载全文 |
