| 汽车桥壳液压胀形工艺的研究及最新进展 |
| |
| 引用本文： | 王连东,梁晨,马雷,王建国,杨东峰,崔亚平.汽车桥壳液压胀形工艺的研究及最新进展[J].东北重型机械学院学报,2012(3):206-209. |
| |
| 作者姓名： | 王连东 梁晨 马雷 王建国 杨东峰 崔亚平 |
| |
| 作者单位： | 燕山大学车辆与能源学院,河北秦皇岛066004 |
| |
| 基金项目： | 河北省自然科学基金资助项目（E2012203022） |
| |
| 摘 要： | 介绍了半滑动式液压胀形的基本思想以及小型汽车桥壳的液压胀形工艺过程,在普通液压机上试制出模拟样件。提出了钢管胀压成形工艺,先将两端缩径的管坯进行液压胀形得到轴对称的预成形管坯,再对其内部充液（水）并用模具压制成形,并试制出胀压成形桥壳样件。与液压胀形样件比较表明：胀压成形样件轮廓清楚,桥包部分过渡小圆角贴模性好,壁厚减薄量小,成形液压力低。
|
| 关 键 词： | 汽车桥壳 液压胀形 胀压成形 工艺试验 |
Research and development of hydroforming automobile housings |
| |
| Authors: | WANG Lian-dong LIANG Chen MA Lei WANG Jian-guo YANG Dong-feng CUI Ya-ping |
| |
| Affiliation: | (College of Vehicles and Energy Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China) |
| |
| Abstract: | A idea of the half-sliding hydroforming technology and the hydroforming process of a small automobile housing is in- troduced. A sample is generated using a common press. The technology of bulging and crushing deforming automobile housing is developed. In this technology, the pre-formed tube blank being of axisymmetric shape is first hydroformed from the chosen seamless tube which ends necked and then charged with liquid and crushed with the die. It is found through the comparison with the hydro- forming samples that the bulging and crushing deforming samples has a good formability, a better wall thickness distribution, and the lower forming pressure. |
| |
| Keywords: | automobile housing hydroforming bulging and crushing deforming engineering test |
| 本文献已被 维普 等数据库收录！ |
|
