| 基于ABAQUS的板料成形数值模拟摩擦模型的二次开发 |
| |
| 引用本文： | 张庭芳,黄菊花,周敬勇,杨国泰,张莹.基于ABAQUS的板料成形数值模拟摩擦模型的二次开发[J].锻压技术,2005,30(6):27-29. |
| |
| 作者姓名： | 张庭芳 黄菊花 周敬勇 杨国泰 张莹 |
| |
| 作者单位： | 南昌大学,机电工程学院,江西,南昌,330029;南昌大学,机电工程学院,江西,南昌,330029;南昌大学,机电工程学院,江西,南昌,330029;南昌大学,机电工程学院,江西,南昌,330029;南昌大学,机电工程学院,江西,南昌,330029 |
| |
| 基金项目： | 江西省自然科学基金;南昌大学校科研和教改项目 |
| |
| 摘 要： | 对近年来兴起的板料成形过程数值模拟新技术研究,提出了一种基于ABAQUS的板料成形数值模拟摩擦模型的二次开发及实现的方法.对于进一步研究板料成形摩擦模型,在基于ABAQUS的板料成形数值模拟中加入新的摩擦模型提供了一种途径.
|
| 关 键 词： | 板料成形 ABAQUS 数值模拟 摩擦模型 |
| 文章编号： | 1000-3940（2005）06-0027-03 |
| 收稿时间： | 2005-06-17 |
| 修稿时间： | 2005-06-17 |
Redevelopment of friction model in the numerical simulation of sheet metal forming process based on ABAQUS |
| |
| ZHANG Ting-fang,HUANG Ju-hua,ZHOU Jing-yong,YANG Guo-tai,ZHANG Ying.Redevelopment of friction model in the numerical simulation of sheet metal forming process based on ABAQUS[J].Forging & Stamping Technology,2005,30(6):27-29. |
| |
| Authors: | ZHANG Ting-fang HUANG Ju-hua ZHOU Jing-yong YANG Guo-tai ZHANG Ying |
| |
| Affiliation: | School of Mechanical and Electrical Engineering, Nanchang University, Nanchang Jiangxi 330029, China |
| |
| Abstract: | By studying the numerical simulation technology of sheet metal formation in recent decades, the article puts forward a method for redeveloping friction model of numerical simulation of sheet metal formation on the basis of ABAQUS. It offers a way to add a new friction model to the numerical simulation of sheet metal formation based on ABAQUS when the friction model of sheet metal formation is being studied deeply. |
| |
| Keywords: | ABAQUS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
