| 基于能量守恒和数值模拟的精密级进模弯曲成形研究 |
| |
| 引用本文： | 江丙云,殷黎明,陈炜,承善.基于能量守恒和数值模拟的精密级进模弯曲成形研究[J].模具工业,2009,35(11). |
| |
| 作者姓名： | 江丙云 殷黎明 陈炜 承善 |
| |
| 作者单位： | 1. 江苏大学模具技术研究所,江苏,镇江,212013
2. 江苏省精密高速模具工程技术研究中心,江苏,昆山,215316 |
| |
| 基金项目： | 江苏省科技基础设施建设计划项目，江苏大学科研课题立项项目 |
| |
| 摘 要： | 对精密多工位级进模的多步弯曲成形进行研究,提出从能量守恒的角度结合数值模拟与功能转换的方法来提高多步弯曲成形精度及减少回弹,以HDMI连接器零件为例,针对90°弯曲部位设计4种折弯方案,分析每种成形方案及回弹过程中相应的板料内能变化并加以比较,确定较优的设计方案。
|
| 关 键 词： | 能量守恒 精密级进模 弯曲成形 回弹 |
The bending forming of precision progressive die based on energy conservation and numerical simulation |
| |
| JIANG Bing-yun,YIN Li-ming,CHEN Wei,CHENG Shan.The bending forming of precision progressive die based on energy conservation and numerical simulation[J].Die & Mould Industry,2009,35(11). |
| |
| Authors: | JIANG Bing-yun YIN Li-ming CHEN Wei CHENG Shan |
| |
| Affiliation: | JIANG Bing-yun1,YIN Li-ming2,CHEN Wei1,CHENG Shan1(1.Institute of Die and Mould Technology,Jiangsu University,Zhenjiang,Jiangsu 212013,China,2.Jiangsu Engineering Technology Research Center of Precision High-speed Die,Kunshan,Jiangsu 215316,China) |
| |
| Abstract: | The multi-step bending forming process of precision progressive dies was investigated.A method for improving the bending precision and reducing the spring back was proposed in which numerical simulation technique was combined with function transformation according to energy conservation.Taking an HDMI connector iron shell as an example,four bending plans were developed for the 90° bending.The changes of internal energy in the forming and spring back process of various sheet metals were computed and compared and an optimized scheme was achieved. |
| |
| Keywords: | energy conservation precision progressive die bending forming spring back |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
