| 利用部件整体耦合法分析柴油机气缸盖热机械强度 |
| |
| 引用本文： | 王宇,白敏丽,吕继组,赵宏国.利用部件整体耦合法分析柴油机气缸盖热机械强度[J].内燃机工程,2007,28(6):41-44,48. |
| |
| 作者姓名： | 王宇 白敏丽 吕继组 赵宏国 |
| |
| 作者单位： | 大连理工大学能源与动力学院,大连,116023 |
| |
| 基金项目： | 国家自然科学基金;辽宁省自然科学基金 |
| |
| 摘 要： | 为提高气缸盖的热机械性能,采用部件整体耦合法对多缸柴油机气缸盖进行了三维非线性有限元分析。在考虑各部件接触关系的基础上,计算了气缸盖在螺栓预紧力、热载荷、最高燃烧压力多场耦合作用下的应力分布,确定了各影响因素在缸盖上造成应力集中的主要位置及原因,并与发动机实际运行后情况进行了对比,为结构改进提供了理论指导。
|
| 关 键 词： | 内燃机 柴油机 气缸盖 部件耦合 热机械强度 |
| 文章编号： | 1000-0925（2007）06-041-04 |
| 收稿时间： | 2006-08-30 |
| 修稿时间： | 2006年8月30日 |
Analysis for Thermo-Mechanical Strength of the Cylinder Head of 6110 Diesel Engine Using Whole Component Coupled Method |
| |
| WANG Yu,BAI Min-li,LV Ji-zu,ZHAO Hong-guo.Analysis for Thermo-Mechanical Strength of the Cylinder Head of 6110 Diesel Engine Using Whole Component Coupled Method[J].Chinese Internal Combustion Engine Engineering,2007,28(6):41-44,48. |
| |
| Authors: | WANG Yu BAI Min-li LV Ji-zu ZHAO Hong-guo |
| |
| Abstract: | In order to improve the thermal mechanical performance of cylinder head, a 3D nonlinear FEA of the cylinder head of a multicy linder diesel engine was conducted by using whole component coupled method. The stress distribution of the cylinder head under the combined action of bolt preload, thermal load and firing pressure was calculated and the locations and causes of stress concentration were found out. The analysis and calculation results showed that this method is helpful to the structure improvement of cylinder head. |
| |
| Keywords: | IC engine diesel engine cylinder head component coupled method thermo-mechanical strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
