|
|||||
|
|
| 连杆大头-曲柄销接触的三维有限元素法计算 | |
| 引用本文： | 钱丽丽,姜树李,朱埏章,缪岳川,杨荣华,王伟峰.连杆大头-曲柄销接触的三维有限元素法计算[J].内燃机工程,2000,21(1):54-58. |
| 作者姓名： | 钱丽丽 姜树李 朱埏章 缪岳川 杨荣华 王伟峰 |
| 作者单位： | 1. 上海交通大学,农工系,上海七莘路2678号,201101 2. 江苏理工大学 3. 常柴股份有限公司 |
| 摘 要： | 对常柴股份有限公司的ＺＳ１１１０型柴油机连杆大头与曲柄销的接触问题作了三维有限元求解计算，并对轴－孔接触的实际接触边界、接触力作了研究。将计算得到的接触力作为曲柄销的力边界条件对曲轴结构强度进行分析，并与常规曲柄销力边界条件下的曲轴有限元计算结果进行了对比。 |
| 关 键 词： | 曲柄 连杆 接触 有限元 内燃机 计算 |
Analysis on the Contact between Con-rod and Crankpin by 3-D Finite Element Method |
|
| Qian Lili,Jiang Shuli,Zhu Yanzhang,Miao Yuechuan,Yang Longhua,Wang Weifeng.Analysis on the Contact between Con-rod and Crankpin by 3-D Finite Element Method[J].Chinese Internal Combustion Engine Engineering,2000,21(1):54-58. | |
| Authors: | Qian Lili Jiang Shuli Zhu Yanzhang Miao Yuechuan Yang Longhua Wang Weifeng |
| Abstract: | The problem on the contact between Con - rod and crankpin is analyzed by 3 - D FEM for Model ZS1110 diesel engine produced by Changzhou Diesel Engine Co. Ltd. The actual contact boundaries and contact forces are investigated. The crankshaft structural strength is analyzed by regarding the calculated contact forces as force boundary conditions of crankpin, which is compared with the calculated results of crankshaft by finite element method under the force boundary of normal crankpin. |
| Keywords: | Crankpins Rods Contact Finite Element Analysis Internal Combustion Engines |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |