| 异形零件表面处理系统设计及喷油轨迹定义 |
| |
| 引用本文： | 赵永磊,魏修亭,王猛.异形零件表面处理系统设计及喷油轨迹定义[J].现代制造技术与装备,2009(2). |
| |
| 作者姓名： | 赵永磊 魏修亭 王猛 |
| |
| 作者单位： | 山东理工大学机械工程学院,淄博,255049 |
| |
| 摘 要： | 针对再生硒鼓生产中喷油(喷漆)工作劳动强度大、生产率低、质量不易保证,并且对人体有毒害作用等缺点,本文提出利用PLC控制系统对喷油过程进行自动控制,对控制系统进行了总体设计,同时采用步进电机驱动滚珠丝杠以及气缸驱动设计了喷油机械手的结构,并且确定了PLC的型号,定义了喷油轨迹.
|
| 关 键 词： | 自动喷油 机械手 可编程控制器(PLC) 喷油轨迹 |
Design of Special-shaped Parts Surface Treatment System and Fuel Definition of Injection Trajectory |
| |
| ZHAO Yonglei,WEI Xiuting,WANG Meng.Design of Special-shaped Parts Surface Treatment System and Fuel Definition of Injection Trajectory[J].Modern Manufacturing Technology and Equipment,2009(2). |
| |
| Authors: | ZHAO Yonglei WEI Xiuting WANG Meng |
| |
| Affiliation: | Shandong University of Technology Institute of Mechanical Engineering;Zibo 255049 |
| |
| Abstract: | There are some shortcomings for painting in reproducing of toner cartridge such as big labour-intensive, low productivity, quality assurance difficult, and a poisoning effect on the human body. Automatic controlling painting process by using PLC(Programmable Logic Controller) is put forward. Overall design is conducted onto the control system, at the same time a stepper motor drive and the ball screw-driven are used, the structure painting manipulator has been designed, and the PLC model has been identified... |
| |
| Keywords: | automatic painting manipulator PLC painting track |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
