Evaluation of inelastic constitutive models under plasticity-creep interaction for steel at 600°C

Uniaxial tests to identify plasticity-creep interaction in steel at 600°C were carried out as the Benchmark Project by the Subcommittee on Inelastic Analysis and Life Prediction, JSMS. The purpose of this paper is to present recent experimental data and predictions of constitutive models obtained in the project. Ten types of constitutive models were utilized to compare analytical predictions to sixteen benchmark experiments which are grouped into four categories: (I) tensile and creep tests under monotonic loading, (II) mixed mode tests under plastic and creep loading, (III) ratcheting deformation tests under program loads, and (IV) cyclic deformation tests under the combination of different strain rates. The benchmark tests in Group IV are used to estimate the creep-fatigue life of steel; the results will be published in a separate paper.     

Stabilization of inter-area and/or oscillatory modes in large-scale power system by voltage impedance power system (VIPS) apparatus based on decentralized control scheme

New technologies such as power electronics have made it possible to change continuously the impedance of a power system not only to control power flow but also to enhance stability. A power system incorporating a variable impedance apparatus such as a variable series capacitor (VSrC) and high-speed phase shifter (HSPS) is called VIPS (Variable Impedance Power System) by the authors. This paper proposes a novel control method of VIPS apparatus such as VSrC and HSPS installed at an interconnecting point for stabilizing inter-area unstable and/or oscillatory modes. The proposed design method of the control system is a kind of hierarchical decentralized control method of a large-scale power system based on a Lyapunov function. Under the proposed control scheme, each subsystem can be stabilized independently by local controllers such as AVR, speed governor and PSS, and then the whole interconnected system can be stabilized by VIPS apparatus taking into account interactions between subsystems. The effectiveness and robustness of the VIPS apparatus control are shown by numerical examples with model systems including a large-scale power system.     

Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading

This study deals with the impact property and damage tolerance of matrix hybrid composite laminates with different laminate constitution. The matrix hybrid composite laminates consisted of the laminae with a conventional epoxy resin and the laminae with a flexible epoxy resin modified from the conventional resin to avoid the interlaminar delamination. The impact energy absorption ratio greatly depended on the matrix resin placed at the impact face. The energy absorption was almost constant if the conventional resin was placed at the impact surface layer, while it increased exponentially with the increasing fraction of the flexible resin if the flexible resin was placed at the impact face. The impact energy was absorbed by the damage development and propagation in the laminate with conventional resin laminae as the impacted face, while it was absorbed by both the recoverable deformation of the flexible resin and the damage propagation in the laminate with flexible resin laminae as the impacted face.     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.     

Comparative study of lipogenic enzymes in several vertebrates

The liver lipogenic enzymes are compared among rats, chickens, frogs and fish. Although the apparent Km values of glucose-6-phosphate dehydrogenase for glucose-6-phosphate are not much different among all the species, those of malic enzyme for malate are much higher in chickens and fish than in rats and frogs. Glucose-6-phosphate dehydrogenase showed very high activities compared with malic enzyme in fish liver, and malic enzyme showed high activities in chicken liver. Although the apparent Km values of acetyl-CoA carboxylase and fatty acid synthetase for substrates are in the same range among all the animals, the activity of acetyl-CoA carboxylase seems to be extremely low in fish and frog livers, and that of fatty acid synthetase is low in frog livers only. In addition, the apparent Km values of α-glycerophosphate acyltransferase of fish liver are very high, and the enzyme activity appears to be extremely low compared to the others. Therefore, the enzymes at the first steps of both fatty acid and glycerolipid syntheses of poikilothermos animals appear to be very low. On the other hand, the Ouchterlony double-diffusion patterns showed that the lipogenic enzymes of chickens, frogs and fish are immunologically different from those of rats, with the exception of acetyl-CoA carboxylase in chickens. Therefore, it is suggested that the fatty acid and glycerolipid forming systems of poikilothermos animals are quite different from those of homoiothermos and the lipogenesis is very low in poikilothermos.     

Mutated KIT Tyrosine Kinase as a Novel Molecular Target in Acute Myeloid Leukemia

KIT is a type-III receptor tyrosine kinase that contributes to cell signaling in various cells. Since KIT is activated by overexpression or mutation and plays an important role in the development of some cancers, such as gastrointestinal stromal tumors and mast cell disease, molecular therapies targeting KIT mutations are being developed. In acute myeloid leukemia (AML), genome profiling via next-generation sequencing has shown that several genes that are mutated in patients with AML impact patients’ prognosis. Moreover, it was suggested that precision-medicine-based treatment using genomic data will improve treatment outcomes for AML patients. This paper presents (1) previous studies regarding the role of KIT mutations in AML, (2) the data in AML with KIT mutations from the HM-SCREEN-Japan-01 study, a genome profiling study for patients newly diagnosed with AML who are unsuitable for the standard first-line treatment (unfit) or have relapsed/refractory AML, and (3) new therapies targeting KIT mutations, such as tyrosine kinase inhibitors and heat shock protein 90 inhibitors. In this era when genome profiling via next-generation sequencing is becoming more common, KIT mutations are attractive novel molecular targets in AML.     

Automatic extraction and measurement of leukocyte motion inmicrovessels using spatiotemporal image analysis

This paper describes a computer vision system for the automatic extraction and velocity measurement of moving leukocytes that adhere to microvessel walls from a sequence of images. The motion of these leukocytes can be visualized as motion along the wall contours. The authors use the constraint that the leukocytes move along the vessel wall contours to generate a spatiotemporal image, and the leukocyte motion is then extracted using the methods of spatiotemporal image analysis. The generated spatiotemporal image is processed by a special-purpose orientation-selective filter and a subsequent grouping process newly developed for this application. The orientation-selective filter is designed by considering the particular properties of the spatiotemporal image in this application in order to enhance only the traces of leukocytes. In the subsequent grouping process, leukocyte trace segments are selected and grouped among all the segments obtained by simple thresholding and skeletonizing operations. The authors show experimentally that the proposed method can stably extract leukocyte motion     

100 Å-thick tunnel junction by double impurity doping liquid phase epitaxy for V-band TUNNETT oscillation

The tunnel injection transit time (TUNNETT) diodes with p⁺p⁺n⁺n⁻n⁺ structure were fabricated by liquid phase epitaxy (LPE). About 100 Å tunnel junction (p⁺n⁺) was successfully prepared by the double impurity diffusion of Ge and S during LPE growth. Continuous wave (CW) oscillation was realized at 51.520 GHz in the V-band cavity with the phase noise of −60 dBc/Hz at 1 kHz bandwidth.