Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

Monte Carlo simulation of hydrogen absorption in palladium and palladium–silver alloys

A modified Monte Carlo (MC) simulation was performed to investigate the hydrogen absorption behavior in Pd and Pd–Ag alloys of the composition Pd_xAg_1−x (x=0.7–0.8) under H₂ pressure (0.1 MPa) at different temperatures. The present method employed can consider the dissociative adsorption of hydrogen molecule and the subsequent absorption of hydrogen atom by formalizing the relationship between the pressure of hydrogen molecule and hydrogen atom. The potential parameters were determined to reproduce the solution enthalpy of hydrogen in pure metals. The results are in good agreement with experimental findings as well as previous theoretical studies. We confirmed that our method is useful to simulate the absorption of hydrogen in metals and alloys.     

Necrotizing fasciitis of the face

Necrotizing fasciitis (NF) is a rapidly progressive soft tissue infection with high morbidity and mortality rates. Its occurrence in the head and neck region is uncommon, the majority of reported cases being limited to involvement of the neck, usually from infections of dental or pharyngeal origin. Involvement of the face from NF is rare; only 35 such cases have been reported in the literature since 1960. It is not only associated with a high mortality but can also result in severe disfigurement of the face, posing challenging reconstructive problems. Successful management of facial NF requires early diagnosis, prompt institution of broad spectrum antibiotics, aggressive surgical debridement to control the infection, and reconstruction of the resultant soft tissue defects. This report describes four additional cases of facial necrotizing fasciitis. One of the four patients died as a result of sepsis and multi-organ system failure. Two of the three surviving patients had significant facial disfigurement. A comprehensive review of the facial NF cases reported in the literature is also provided. Based on our experience with facial NF and the results of all previous case reports, the clinical manifestations, pathogenesis, and management of this disease are discussed.     

Surface Hardening of Carbon Steel Using High Powered YAG Laser

A high powered YAG laser with kaleidoscope for surface modification was applied to the surface hardening of carbon steels containing 0. 18-0.54 wt% C without the absorbents, and the relationships between laser processing and surface hardening were investigated by hardness and microstructure. The structure of the hardened zone underwent complete martensitic transformation in all of the carbon steels tested, and its hardness increased with greater carbon content. Under identical irradiated conditions, the hardened zone expanded with increasing carbon content. A hardened zone extending from the surface to a depth of 1.0 mm was obtained at a laser power of 1.0 kW and a scanning speed of 1 mm/sec. It was found that in the surface hardening of carbon steels, a high powered YAG laser can be used to control the hardened zone by selecting the appropriate irradiation conditions, however, the hardened zone was affected by the assistant gas and the flow rate.     

Examination of the role of oxygen in the photografting of methacrylic acid on a polyethylene film with a mixed solvent consisting of water and organic solvents

The photografting of methacrylic acid (MAA) on a linear low‐density polyethylene film (thickness = 30 μm) under air and nitrogen atmospheres was investigated at 60°C in mixed solvents consisting of water and an organic solvent, with xanthone as a photoinitiator. The organic solvents used were acetone, methanol, tetrahydrofuran, and dioxane. A maximum percentage of grafting occurred at a certain concentration of the organic solvent in the mixed solvent. This was observed for the systems under both air and nitrogen. The grafting reaction under air exhibited an induction period, but the rate of grafting after the period was greater than that under nitrogen. The formation of poly(ethylene peroxide)s by photoirradiation seemed to be a factor for the accelerated photografting under air. On the basis of attenuated total reflection infrared spectroscopy and scanning electron microscopy of the grafted film, the MAA‐grafted chains of the sample prepared under air tended to penetrate more deeply inside the film than those of the sample prepared under nitrogen. The resulting grafted films exhibited a pH‐responsive character: the grafted films shrank in an acidic medium but swelled in alkaline medium. This was evaluated from measurements of dimensional changes in the grafted films. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 992–998, 2003     

Preparation of niobates of rhodium and nickel and their catalytic behaviors during calcination and reduction treatments

Double oxides of Rh and Ni have been prepared by chemical mixing methods. Silica-supported and unsupported RhNbO₄ and NiNb₂O₆ catalysts exhibited strong metal-oxide interaction behaviors in ethane hydrogenolysis activities after the decomposition of the double oxides by H₂ reduction at 500°C. Silica-supported and zeolite-supported RhVO₄ catalysts showed high activity and selectivity for dehydrogenation of cyclohexane after the decomposition in H₂. The double-oxide catalyst systems can be used as starting materials to obtain high-performance metal catalysts (redispersion of metals by H₂ reduction and regeneration of catalysts by calcination at a high temperature).     

Flexural properties of moldings of rigid polyurethane made by reaction injection molding

Flexural properties of moldings made by Reaction Injection Molding (RIM), which are structural foams consisting of high density skin and low density core, were investigated by three-point bending tests. Two failure modes were observed in bending tests of the moldings made by RIM, and they are classified as follows according to the density ratio of skin layer to core layer: the opposite side of the skin layer to which load was subjected failed by tensile stress: and the same side of the skin layer to which load was subjected failed by compressive stress, causing wrinkling or buckling. Then the conventional composite beam theory was applied to the former failure mode and Hoff s buckling theory to the latter, and equations were derived to predict the flexural properties of the structural foams, which involved buckling from the flexural properties of solid construction. In addition, it has been shown that there exists a density distribution that maximizes the flexural strength of the moldings made by RIM with a given overall density. The results obtained here should be useful to the optimum structural design of moldings made by RIM.     

Protein modelling using a chimera reference protein derived from exons

Bovine pancreatic /S-trypsin (PDB ID-code: 1TPO) which is registeredin the Brookhaven Protein Data Bank (PDB) consists of four exons.The results of homology searches for each exon in the PDB showedthat homologous proteins were tonin (PDB ID-code: 1TON), ratmast cell protease (PDB ID-code: 3RP2_A), kaffikrein A (PDBID-code: 2PKA_B) and kallikrein A (2PKA_B) respectively. Thus,for the three-dimensional structure prediction of 1TPO, a chimeraprotein was constructed from the three proteins mentioned aboveand the 3-D structure prediction was performed using this chimerareference protein. The modelled structure of 1TPO was energeticallyoptimized by molecular mechanics and molecular dynamics simulationand was compared with its X-ray crystal structure registeredin the PDB. The root mean square deviations (r.m.s.d.) of mainchain atoms and the neighbouring active site (5 sphere fromHis57, AsplO2 and Serl95) between the modelled structure andthe X-ray structure were 1.66 and 0.94 respectively. Porcinepancreatic elastase (PDB ID-code: 3EST) which is registeredin the PDB was used as the reference protein and the modelledstructure from 3EST was also compared with the X-ray data. Ther.m.s.d. of main chain atoms and that of the active site were2.14 and 1.18 respectively. These results dearly support thepropriety of this method using the chimera reference protein.