Numerical evaluation of three-dimensional water impact by the displacement potential formulation

The numerical accuracy of the displacement potential approach for a three-dimensional water-impact problem is investigated. An examination of the elliptic paraboloid shows that the boundary-value problem for the displacement potential, as well as the velocity potential, can be solved accurately, even if the panel size of the numerical scheme is no small enough. The numerical accuracy of the position of the contact line is poor. However, the accuracy of the virtual mass is good because of the averaging effect along the contact line. A comparison with Scolan and Korobkin's designed body confirms the accuracy of the drop speed and the penetration displacement. The displacement potential approach is extended to the case of water impact with trapped air. The numerical accuracy of the calculated air pressure in the cavity is confirmed by comparison with an experimental result. With these results, the suitability of the displacement potential approach to the ship-slamming problem is demonstrated.     

Breakdown of oil films and formation of residual films

The breakdown processes of oil films under quasi-static loading have been investigated by using a newly developed steel-oil-mercury system. The relationship between the thickness and breakdown ratio of a hexadecane film is represented by a single master curve independently of the indentation speed, indentation load, and temperature. The master curve shows that the breakdown process of hexadecane includes two stages; one is the decrement of the thickness without breakdown and the other is the decrement of the thickness with a drastic progress of breakdown. By solving a small amount of fatty acid in hexadecane, the thickness increases and the breakdown ratio decreases noticeably; a multilayer residual film supporting normal load is formed between two metal surfaces. Experiments at different temperatures reveal a negative relationship between the temperature and thickness of residual film, which indicates that the residual film is organized by physical interaction rather than chemical interaction. At least under a lower concentration, the residual film appears to consist of not only fatty acid molecules but also hexadecane molecules.     

Pulmonary vascular disease and operative indications in complete atrioventricular canal defect in early infancy

Pulmonary vascular disease was morphometrically analyzed in 67 patients (mean age, 19 months) with isolated complete atrioventricular canal defect. Complete obstruction of the small pulmonary arterial lumen resulting from acute fibrous proliferation and atrophy of the peripheral arterial media, which were considered absolute operative contraindications, were characteristic in six patients with Down's syndrome. Morphometric analysis of medial thickness revealed that thinning of the media of the small pulmonary arteries is generally observed at around 6 months of age in patients with complete atrioventricular canal defect and that the media in patients who have complete atrioventricular canal defect and Down's syndrome was thinner than that in such patients without Down's syndrome. These results suggest that thinning of the media as a result of two factors--Down's syndrome and aging--facilitates the rapid occurrence of fibrous intimal proliferation. Therefore intracardiac repair is desirable within 6 months of life, before medial thinning, in patients with complete atrioventricular canal defect and Down's syndrome. Excluding patients with absolute operative contraindications, the scores of the index of pulmonary vascular disease in operative survivors were below 2.0 and death occurred when scores were more than 2.2. The pulmonary vascular resistances measured in room air and by the oxygen inhalation and tolazoline tests in patients with operative contraindications were more than 7.3, 3.8, and 6.6 units.m2, respectively. We thus conclude that lung biopsy should be undertaken for patients in whom pulmonary vascular resistance is beyond these values to determine the appropriateness of surgical intervention.     

Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

Monte Carlo simulation of hydrogen absorption in palladium and palladium–silver alloys

A modified Monte Carlo (MC) simulation was performed to investigate the hydrogen absorption behavior in Pd and Pd–Ag alloys of the composition Pd_xAg_1−x (x=0.7–0.8) under H₂ pressure (0.1 MPa) at different temperatures. The present method employed can consider the dissociative adsorption of hydrogen molecule and the subsequent absorption of hydrogen atom by formalizing the relationship between the pressure of hydrogen molecule and hydrogen atom. The potential parameters were determined to reproduce the solution enthalpy of hydrogen in pure metals. The results are in good agreement with experimental findings as well as previous theoretical studies. We confirmed that our method is useful to simulate the absorption of hydrogen in metals and alloys.