Applications and Technologies of All-Solid State Blue Laser

1 Introduction Along with the matureness of laser diode (LD) manufacturing technology, the performance of LD has been improved greatly since 1980s, so various kinds of laser devices based on LD have been developed rapidly, especially the all-solid state lasers. After early experiments and researches, the all-solid state lasers have been commercialized successfully.     

Improved fully-balanced current-mode integrator

A high CMRR fully-balanced current-mode integrator structure is presented. The proposed structure improves the CMRR at low frequencies by a factor of g_m/g_o. Moreover, the structure provides more flexibility to guarantee stability and is significantly less sensitive to process mismatches. The differential and common-mode gains and CMRR at low and high frequencies are analysed as well as verified in simulation     

D301树脂分离衣康酸的工艺研究

采用弱碱性阴离子交换树脂Ｄ３０１对发酵法生产的衣康酸进行了分离研究。通过静态交换实验，研究了Ｄ３０１树脂对衣康酸的静态交换动力学，确定了传质机制和影响因素；通过动态交换实验，研究了以硫酸为洗脱剂，以氨水为再生剂的工艺过程，确定了主要工艺参数。     

钛酸钾品须填充UHMWPE复合材料的摩擦磨损性能研究

用钛酸钾晶须(PTW)对超高摩尔质量聚乙烯(UHMWPE)进行填充改性,考察了复合材料的摩擦磨损性能,研究了其结晶情况,观察了磨损表面形貌并分析了其机理.结果表明随着PTW用量的增加,复合材料的硬度、结晶度以及维卡软化点都有所增大.PTW提高了复合材料的耐磨性,但摩擦系数有所上升.PTW的加入使得UHMWPE的磨损机理从黏着磨损和塑性变形改变成疲劳磨损和轻微的塑性变形,提高了其抗磨粒磨损的性能.     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007     

A novel spherical-ordered macroporous CuO nanocatalyst for the electrochemical reduction of carbon dioxide

Journal of Applied Electrochemistry - The electrocatalytic reduction of CO2 is a promising research direction in resource utilization and sustainable energy development. However, there is still a...     

Syntax–Aware graph convolutional network for the recognition of chinese implicit inter-sentence relations

The Journal of Supercomputing - In the literature, most previous studies on English implicit inter-sentence relation recognition only focused on semantic interactions, which could not exploit the...     

WindowsCE.NET中断延迟测试与分析

嵌入式系统对实时性能一般要求较高,中断延迟是评估嵌入式操作系统实时性能的重要指标。利用ILTiming测试工具对WinCE4.2和5.0进行中断延迟测量,分析了导致中断延迟的原因,同时针对PXA255处理器的BSP提出了测试WindowsCE系统中断延迟的方法。