Demonstration of a tool for automatic learning and re-use of knowledge in the activated sludge process.

Wastewater treatment plant operators encounter complex operational problems related to the activated sludge process and usually respond to these by applying their own intuition and by taking advantage of what they have learnt from past experiences of similar problems. However, previous process experiences are not easy to integrate in numerical control, and new tools must be developed to enable re-use of plant operating experience. The aim of this paper is to investigate the usefulness of a case-based reasoning (CBR) approach to apply learning and re-use of knowledge gained during past incidents to confront actual complex problems through the IWA/COST Benchmark protocol. A case study shows that the proposed CBR system achieves a significant improvement of the benchmark plant performance when facing a high-flow event disturbance.     

Benchmark simulation Model no 2 in Matlab-simulink: towards plant-wide WWTP control strategy evaluation.

In this paper, implementation of the Benchmark Simulation Model No 2 (BSM2) within Matlab-Simulink is presented. The BSM2 is developed for plant-wide WWTP control strategy evaluation on a long-term basis. It consists of a pre-treatment process, an activated sludge process and sludge treatment processes. Extended evaluation criteria are proposed for plant-wide control strategy assessment. Default open-loop and closed-loop strategies are also proposed to be used as references with which to compare other control strategies. Simulations indicate that the BM2 is an appropriate tool for plant-wide control strategy evaluation.     

WWTP dynamic disturbance modelling--an essential module for long-term benchmarking development.

Intensive use of the benchmark simulation model No. 1 (BSM1), a protocol for objective comparison of the effectiveness of control strategies in biological nitrogen removal activated sludge plants, has also revealed a number of limitations. Preliminary definitions of the long-term benchmark simulation model No. 1 (BSM1_LT) and the benchmark simulation model No. 2 (BSM2) have been made to extend BSM1 for evaluation of process monitoring methods and plant-wide control strategies, respectively. Influent-related disturbances for BSM1_LT/BSM2 are to be generated with a model, and this paper provides a general overview of the modelling methods used. Typical influent dynamic phenomena generated with the BSM1_LT/BSM2 influent disturbance model, including diurnal, weekend, seasonal and holiday effects, as well as rainfall, are illustrated with simulation results. As a result of the work described in this paper, a proposed influent model/file has been released to the benchmark developers for evaluation purposes. Pending this evaluation, a final BSM1_LT/BSM2 influent disturbance model definition is foreseen. Preliminary simulations with dynamic influent data generated by the influent disturbance model indicate that default BSM1 activated sludge plant control strategies will need extensions for BSM1_LT/BSM2 to efficiently handle 1 year of influent dynamics.     

Magnetotransport Calculations for Two-Dimensional Electrons with Spin-Orbit Interaction

We present calculations of the magnetoconductivity in a two-dimensional electron system including the Rashba spin-orbit interaction. Essential for these calculations is an extension of the self-consistent Born approximation which takes into account the electron spin degree of freedom. The calculated magnetoconductivity exhibits, besides the beating in the Shubnikov-de Haas oscillations, a modulation related to the spin-orbit induced crossings of Landau levels, as a consequence of spin-conserving scattering between spin-orbit coupled states.     

Design and performance evaluation of a banyan network basedinterconnection structure for ATM switches

This paper presents a new self-routing packet network called the plane interconnected parallel network (PIPN). In the proposed design, the traffic arriving at the network is shaped and routed through two banyan network based interconnected planes. The interconnections between the planes distribute the incoming load more homogeneously over the network. The throughput of the network under uniform and heterogeneous traffic requirements is studied analytically and by simulation. The results are compared with the results of the baseline network and another banyan network based parallel interconnection network. It is shown that, for the proposed design, a higher degree of heterogeneity results in better performance     

Expression of three UDP-N-acetyl-alpha-D-galactosamine:polypeptide GalNAc N-acetylgalactosaminyltransferases in adenocarcinoma cell lines

The levels of mRNA expression of three UDP-N-acetyl-alpha-D-galactosamine:polypeptide GalNAc N-acetylgalactosaminyltransferases (GalNAc-transferases) were quantified for human adenocarcinoma cell lines from pancreas, colon, stomach, and breast. Two of the GalNAc-transferases, GalNAc-T1 and GalNAc-T2, were expressed constitutively and at low levels in most or all cell lines examined. A third GalNAc-transferase, GalNAc-T3, was differentially expressed. Well-differentiated adenocarcinoma cell lines expressed high levels and moderately differentiated cell lines expressed lower levels of GalNAc-T3. Cell lines classified as poorly differentiated failed to express GalNAc-T3 mRNA at levels that could be detected by Northern blot analysis. Differential expression of the GalNAc-T3 protein was confirmed in these cell lines by Western blotting. We propose that glycosylation in tumor cell lines may be regulated in part by differential expression of GalNAc-transferases, and we suggest that GalNAc-T3 gene expression may be a molecular indicator of differentiated adenocarcinoma.     

Differences in the yields of dicentrics and reciprocal translocations observed in the chromosomes of irradiated human skin fibroblasts and blood lymphocytes from the same healthy individuals

The modulatory role of locally produced cyclooxygenase products and endothelium-derived nitric oxide in controlling vascular tone was investigated in bovine intra-mammary artery. Vascular reactivity initiated by vasoactive compounds, endothelin-1 (ET-1), bradykinin (BK), and substance P (SP) was measured isometrically in an isolated tissue bath. The effects of a cyclooxygenase inhibitor, indomethacin (10(-5) M) and an inhibitor of nitric oxide production, N omega-Nitro L-Arginine (L-NNA: 3 x 10(-4) M) were determined during agonist-mediated responses. Indomethacin alone markedly enhanced vascular contraction produced by ET-1, while L-NNA did not. Inhibition of endothelium-derived nitric oxide synthesis by L-NNA, however, significantly attenuated BK- and SP-induced vascular relaxations, whereas indomethacin had slight influence. The potentiation between indomethacin and L-NNA in regulating vasomotor tone was not observed in this vascular bed. Thus, it appeared that both the cyclooxygenase and endothelium-derived nitric oxide pathways participated in modifying vascular reactivity. Domination of one pathway over the other depended upon the agonist used to stimulate vascular tissue.     

Low temperature wafer direct bonding

A pronounced increase of interface energy of room temperature bonded hydrophilic Si/Si, Si/SiO₂, and SiO₂/SiO ₂ wafers after storage in air at room temperature, 150°C for 10-400 h has been observed. The increased number of OH groups due to a reaction between water and the strained oxide and/or silicon at the interface at temperatures below 110°C and the formation of stronger siloxane bonds above 110°C appear to be the main mechanisms responsible for the increase in the interface energy. After prolonged storage, interface bubbles are detectable by an infrared camera at the Si/Si bonding seam. Desorbed hydrocarbons as well as hydrogen generated by a reaction of water with silicon appear to be the major contents in the bubbles. Design guidelines for low temperature wafer direct bonding technology are proposed