Effect of supports on the redox performance of pyrite cinder in chemical looping combustion

Chemical looping combustion (CLC) is a clean and efficient flame-free combustion technology,which combust the fuels by lattice oxygen from a solid oxygen carrier with inherent CO2 capture.The develop-ment of oxygen carriers with low cost and high redox performance is crucial to the whole efficiency of CLC process.As the solid by-product from the sulfuric acid production,pyrite cinder presented excellent redox performance as an oxygen carrier in CLC process.The main components in pyrite cinder are Fe2O3,CaSO4,Al2O3 and SiO2 in which Fe2O3 is the active component to provide lattice oxygen.In order to sys-tematic investigate the functions of supports (CaSO4,Al2O3 and SiO2) in pyrite cinder,three oxygen car-riers (Fe2O3-CaSO4,Fe2O3-Al2O3 and Fe2O3-SiO2) were prepared and evaluated in this study.The results showed that Fe2O3-CaSO4 displayed high redox activity and cycling stability in the multiple redox cycles.However,both Fe2O3-Al2O3 and Fe2O3-SiO2 experienced serious deactivation during redox reactions.It indicated that the inert Fe-Si solid solution (Fe2SiO4) was formed in the spent Fe2O3-SiO2 sample,which decreased the oxygen carrying capacity of this sample.The XPS results showed that the oxygen species on the surface of Fe2O3-CaSO4 could be fully recovered after the 20 redox cycles.It can be concluded that CaSO4 is the key to the high redox activity and cycling stability of pyrite cinder.     

关节式电分相电磁暂态过程研究

关节式电分相是电气化铁路牵引供电系统较为薄弱的环节,电力机车在通过关节式电分相时经常会产生过电压现象,过电压可能会造成机车放电间隙击穿、牵引所馈线保护跳闸,严重影响铁路的安全运营.从实测结果来看,机车在过渡区和中性区行驶时过电压会持续存在一段时间,与以往对关节式电分相产生过电压的研究作对比,分析造成电磁暂态过程以及过电压延续的原因可能是机车的移动.在MATLAB/Simulink软件上建立了机车过关节式电分相的仿真模型,用多个离散过程来近似模拟机车过电分相的连续过程,最后与实测波形对比,验证等效模型是有效的.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

Characterization of ultrafine La x Sr1−x MnO3 powder prepared by spray pyrolysis

The characterization of La _x Sr_1−x MnO₃ powders produced by spray pyrolysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observation, specific surface area (Brunauer-Emett-Teller), and particle size distribution measurements shows that the resultant large particles are loose agglomerates consisting of many small particles. However, the sintered tiny particles can form hard agglomerates, and the particle size increases remarkably. The structures of the powders before and after sintering were identified by x-ray diffraction (XRD). The study of the electrical property of the powder shows that the powder is a metallic conductor. In a reducing atmosphere, the powder can be decomposed. When the powder is cofired with yttria-stabilized zirconia 5% (YSZ) powder at 1200 °C for 5 h, no new phase is produced, and the powder remains a single provskite hexagonal-rhombohedral structure.     

THE STRESS FIELD OF CUBIC PRECIPITATES

求得了立方形沉淀相的应力场并和等体积的球形沉淀相的应力场作了比较。对镍基合金中γ′相应力场的作用作了简短讨论。     

测定银的新催化分光光度法研究──藏红T－碘化钾指示反应体系

根据银对藏红Ｔ与碘离子氧化还原反应的催化作用，建立了一种测定微量银的动力学光度法。方法的线性范围为０．５～４．０μｇ／ｍｌ，检测限为０．０２μｇ／ｍｌ。除Ｈｇ２＋严重干扰，Ｆｅ３＋、Ｃｒ６＋有轻度干扰外，其余常见的离子不影响测定。与常见测定银的动力学法相比，本法反应速度很快，且所有测定均可在室温下进行。     

氰化氢在终冷塔中气液两相之间转移的研究

分析了煤气中氰化氢的形成,论述了氰化氢在煤气和其冷凝液中的平衡机理,讨论了影响氰化氢相平衡的因素,研究了直接终冷、间接终冷时煤气中氰化氢的转移情况。     

磷酸浓缩氟吸收问题的探讨

将我国现有的几种磷酸浓缩流程和实际应用效果进行比较 ,并从氟吸收机理分析探讨氟吸收级数与吸收效率的关系 ;氟硅酸浓度、温度与吸收效率的关系 ;吸收设备和雾沫分离器选型等     

铁(Ⅲ)—苯芴酮—聚乙二醇辛基苯基醚显色反应的研究及应用

详细研究了非离子表面活性剂聚乙二醇辛基苯基醚（OP）存在下铁（Ⅲ）与苯芴酮的显色反应。结果表明铁（Ⅲ）与苯芴酮形成了蓝紫色的配合物，其最大吸收波长λmax为614nm，对比度（△λ）为74nm，摩尔吸光系数ε614为6．41×104L·emol(-1)·cm(-1)，铁量在0～16μg／25mL范围内服从比耳定律。所拟方法用于磷矿样中铁的分析与邻菲罗啉法结果一致。