首尔地面公交系统改革的成功经验

随着经济、人口的快速发展,首尔开展了一次针对地面公交系统的成功而深刻的变革。其中包括组建以公众参与为基础的公交系统改革公民委员会,形成了“以线路连接为导向的公交系统”,采用新型公交智能卡、票价新制度以及信息一体化的管理系统。     

Ultrasonic thin-walled tube wave structure for sensing devices

Theoretical and experimental investigations of thin-walled tube acoustic wave devices for gravimetric sensing applications are presented. Integrated sensor configurations have been demonstrated by employing a sol-gel processed thin piezoelectric lead zirconate titanate (PZT) film. This was coated coaxially on stainless steel tubes and interdigital transducers (IDT) fabricated as the transmitter and receiver on the curved tube surfaces. We have observed tube waves along both the axial and circumferential directions between 1 and 6.6 MHz. We have also analyzed the mass sensitivities of different modes propagating along the tubes and shown that high mass sensitivity can be achieved by keeping the tube wall thin     

Cast bulk ZrTiAlCuNi amorphous alloys

Cylindrical bulk amorphous samples with diameters up to 10 mm have been prepared by casting ZrTiAlCuNi alloys in a copper mould. In order to rank glass-forming ability as a function of alloy composition, alloys were also cast into wedge-shaped moulds; to a first approximation, the thickness of the amorphous region obtained can be taken as an indication of glass-forming ability. The compositions which lead to the production of bulk glasses all have reduced glass transition temperatures in excess of 0.65 and the extremely high glass-forming ability of these compositions is discussed. We suggest that both the Al and Ti contents are determining factors for the production of bulk amorphous samples and these are believed to reduce the driving force for, and hence the rate of, crystallisation. These amorphous alloys have been found to display high thermal stability and can be annealed for several minutes in the supercooled liquid region. They are ductile at room temperature and have a high value of yield stress.     

陶瓷材料的冷加工与热处理

综述评述最近发展起来的陶瓷材料的烧结后冷加工热处理法“控制破碎成形加工法”，着重介绍该方法的由业，阐明其理论与实验基础，同时，介绍其应用并讨论其发展前景。     

基于物联网技术的监狱人员定位可视化管理系统

提出了一种监狱人员定位可视化管理系统的设计和实现方法。该系统基于WLAN的RTLS定位技术,实现对服刑人员、干警、访客等人群的可视化定位管理。文章结合监狱的应用需求,首先给出了系统的总体设计原则;同时在总体原则约束下,对系统功能、总体实现方案、实现框图、应用流程、网络安全等部分进行阐述,给出了标签软硬件设计、定位管理系统的平台选型和软件架构;最后对设计的系统进行了测试。测试结果显示,该可视化定位管理系统的定位精度达到了预期效果。在进一步优化和完善后,即可大规模推广使用。     

基于J2EE平台的供应链管理系统研究

介绍了供应链管理的基本原理和实现技术，从平台基础、移植性、扩展性等多个角度对J2EE平台进行了相应的分析，提出了一个基于J2EE平台的供应链管理系统框架，并从系统结构、系统功能模块等方面进行了说明。     

PARAMAGNETIC MEISSNER EFFECTS IN MELT-TEXTURED Y_(0.99)Nd_(0.01)Ba_2Cu_3O_(7-y)SUPERCONDUCTOR

The paramagnetic Meissner effect (PME) was observed on the field-cooled M-T curvesof melt-textured Y0.99Nd0.01Ba2Cu3O7-y in applied magnetic fields from 1kOe toJ0kOe. In the magnetic field below 1kOe, the sample undergoes the typical transi-tion from the normal state to the superconducting state when it was cooled down. Theapplied magnetic fields in which the PME occurs, are very high compared with thefields reported in literatures. We propose that the occurrence of the PME may be dueto a phase transition of flux vortices in the superconductors.     

关节式电分相电磁暂态过程研究

关节式电分相是电气化铁路牵引供电系统较为薄弱的环节,电力机车在通过关节式电分相时经常会产生过电压现象,过电压可能会造成机车放电间隙击穿、牵引所馈线保护跳闸,严重影响铁路的安全运营.从实测结果来看,机车在过渡区和中性区行驶时过电压会持续存在一段时间,与以往对关节式电分相产生过电压的研究作对比,分析造成电磁暂态过程以及过电压延续的原因可能是机车的移动.在MATLAB/Simulink软件上建立了机车过关节式电分相的仿真模型,用多个离散过程来近似模拟机车过电分相的连续过程,最后与实测波形对比,验证等效模型是有效的.