Assignment of most genes encoding major peroxisomal polypeptides to chromosomal band V of the asporogenic yeast Candida tropicalis

The peroxisomes of the asporogenic yeast Candida tropicalis contain about 20 major polypeptides (PXPs). We have isolated a number of genes encoding them; 11 POX genes encoded independent PXPs and three POY genes were likely to encode three other PXPs. To locate these genes on the chromosomes, chromosomes of C. tropicalis were separated by pulsed-field gel electrophoresis. Eight chromosomal bands were observed over the range of 1.0 Mbp (band 1) to 2.8 Mbp (band VIII); the genome size was estimated to be about 20 Mbp. Southern blot analysis showed that ten genes were on band V, three genes were on band IV, and the other gene was on band VI. Three genes gave hybridization signals of nearly equal intensity on two different chromosomal bands: POX6A and POX8B, on bands V and VII; and POX8A, on bands IV and VI. Ribosomal RNA genes also hybridized to two bands, VI and VII. Most genes assigned to only one band hybridized to two restriction fragments produced by either NotI or SfiI endonuclease. The results suggested that C. tropicalis was diploid and that restriction sites were conserved little between homologues. The three POX genes that were found on two chromosomal bands hybridized to not more than two restriction fragments, implying that the allelic genes were present on different chromosomal bands.     

Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.     

Generation of adaptive gait patterns for quadruped robot with CPG network including motor dynamic model

This paper describes the generation of adaptive gait patterns using new Central Pattern Generators (CPGs) including motor dynamic models for a quadruped robot under various environments. The CPGs act as the flexible oscillators of the joints and adjust joint angles to required values. The CPGs are interconnected with each other and sets of their coupling parameters are adjusted by a genetic algorithm so that the quadruped robot can realize stable and adequate gait patterns. Generation of gait patterns results in the formation of the CPG networks suitable for the formation of not only a straight walking pattern but also of rotating gait patterns. Experimental results demonstrate that the proposed CPG networks are effective for the automatic adjustment of the adaptive gait patterns for the tested quadruped robot under various environments. Furthermore, the target tracking control based on image processing is achieved by combining the general gait patterns. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(1): 35–43, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20225     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

A 220-MHz pipelined 16-Mb BiCMOS SRAM with PLL proportionalself-timing generator

This 512 Kw×8 b×3 way synchronous BiCMOS SRAM uses a 2-stage wave-pipeline scheme, a PLL self-timing generator and a 0.4-μm BiCMOS process to achieve 220 MHz fully-random read/write operations with a GTL I/O interface. Newly developed circuit technologies include: 1) a zig-zag double word-line scheme, 2) a centered bit-line load layout scheme, and 3) a phase-locked-loop (PLL) with a multistage-tapped ring oscillator which generates a clock cycle proportional pulse (CCPP) and a clock edge lookahead pulse (CELP)     

Direct observation of time-dependent space charge profiles in XLPEcable under high electric fields

Space charge distribution was measured, applying an electric field of >1 MV/cm to 3 mm thick XLPE cable insulation. Improving the conventional pulse electro-acoustic method, a new method was developed to measure space charge when applying HV to cables. Under high field, hetero charges were formed soon after voltage application, followed by an injection from the cathode. Then intermittent injections of charge packets from the anode took place. The space charge distribution kept changing without becoming stabilized. A simulation was done assuming hysteresis of the injection characteristics. The observed intermittent injection near the anode was qualitatively reproduced using computer simulation     

A novel tungsten light-shield structure for high-density CCD imagesensors

A novel tungsten light-shield structure has been developed. Tungsten film properties, the device configuration with the tungsten light-shield structure, and experimentally achieved results regarding device characteristics are described. Optical measurement clarified that tungsten film has a sufficiently low transmittance value for practical use for more than 200-nm-thick film and is stable up to 1000°C. The good step coverage and low reflectance, such as 20-40% for aluminum, required for light-shield film were also obtained. A tungsten light-shield structure was applied to a 1/2-in format 668(H)-pixel×575(V)-pixel charge coupled-device (CCD) image sensor. An extremely low smear value, less than 0.001%, was obtained for a 300-nm film thickness     

Lipid-Lowering Effect of Eriocitrin, the Main Flavonoid in Lemon Fruit, in Rats on a High-Fat and High-Cholesterol Diet

ABSTRACT:  Eriocitrin (eriodictyol 7- O -β-rutinoside) is the main flavonoid in lemon fruit. In this study, eriocitrin was investigated for its lowering effect on serum and hepatic lipids in high-fat and high-cholesterol fed rats. Rats in the control group ( N = 6) were fed a 20% lard and 1% cholesterol diet for 21 d, and rats in the 0.35% eriocitrin group ( N = 6) and 0.70% eriocitrin group ( N = 6) were fed a diet supplemented with eriocitrin 0.35% and 0.70%, respectively. The content of hepatic total cholesterol and triglyceride in the eriocitrin group was no different from that of the control group. The total cholesterol, VLDL+LDL, triglyceride, and phospholipid in the serum of the 0.35% eriocitrin group showed significantly lower concentrations than the control group ( P < 0.05), although there was no difference in the HDL concentrations among the groups. The lowering effect of eriocitrin for serum total cholesterol was thought to be caused by a decrease in VLDL+LDL. The 0.35% eriocitrin group was shown to have a significant increase in excretion of fecal bile acid ( P < 0.05) and a tendency for enhanced hepatic m-RNA levels of LDL receptor in comparison with the control group.