下部调剂对高炉炉料运动影响的离散模拟

应用三维离散元法对4 000m3高炉内的炉料运动行为进行研究.结果表明:鼓风动能增加,风口回旋区加深并没有改变高炉上部的料层结构与分布状况,而是使得高炉下部死料柱变小、变矮,其对上部炉料的支撑作用减弱,致使上部炉料的下降速度明显增大,冶炼强度得以提高.风口中心线以上2m处炉腹段,炉料的运动速度与应力分布趋于均一化.堵风...     

Characterisation of cellulose treated by the steam explosion method. Part 3: Effect of crystal forms (cellulose I,II and III) of original cellulose on changes in morphology,degree of polymerisaion,solubility and supermolecular structure by steam explosion

An attempt was made to clarify the effect of the crystal form of untreated cellulose on the morphological and structural changes of cellulose during steam explosion treatment (steam pressure P = 2.9MPa (T = 508K), treatment time t = 15-300 s). For this purpose, the crystal form of soft wood pulp (cellulose I) was converted by solid-to-solid transition, with minimal unavoidable change in other structural characteristics including morphology and average degree of polymerisation, into cellulose II or cellulose III. It was proved by both X-ray and solid-state cross-polarisation/magic-angle sample-spinning (CP/MAS) ¹³C NMR analyses that even a simple addition of water at room temperature brought about a significant structural change in the steam-untreated cellulose samples. The solubility towards 9.1 wt% aqueous sodium hydroxide, S_a, of the cellulose samples of crystal forms I and III could be improved from 31-33% up to almost 100% by selecting appropriate steam explosion conditions (for example, P = 2.9MPa, t = 30 s). Such a magnificent increase in S_a by the steam explosion treatment was not observed for the cellulose II sample, even under the rather severe conditions of the steam explosion treatment at which the cellulose III crystal was converted to a large extent to cellulose I, as confirmed by X-ray diffraction. X-ray diffraction analysis showed that crystallisation of samples with cellulose I or II crystal occurred to some extent during the steam explosion treatment. Contrary to this, the degree of breakdown of the intramolecular hydrogen bond O₃…O'₅, as estimated by CP/MAS ¹³C NMR analysis, significantly increased for cellulose I and I11 during the treatment. The decrease in the viscosity-average degree of polymerisation, P, observed for all treated samples can be roughly categorised into two or three steps of the first-order decomposition reaction with different reaction rates.     

Effect of polyethyleneglycol on polymerization of methyl methacrylate initiated by sodium salt-type macromolecular electrolytes

Summary The effects of polyethyleneglycol (PEG) on the radical polymerizations of methyl methacrylate initiated with the aqueous solutions of such macromolecular electrolytes as sodium polyphenolate and sodium polycarboxylate were studied. PEG was found to promote the polymerizations initiated by such sodium salt-type's macromolecular electrolytes.Vinyl Polymerization. 415.     

Evolutionary robot controllers with competitive and cooperative neural networks

This article describes a new approach for control systems for an autonomous mobile robot by using sandwiches of two different types of neural network. One is a neural network with competition and cooperation, and is used for recognizing sensor information where synaptic coupling are fixed. The second is a neural network with adaptive synaptic couplings corresponding to a genotype in a creature, and used for self-learning for the wheel controls. In a computer simulation model, we were successful in obtaining four types of robot with good performance when going along a wall. The model also showed robustness in a real environment. This work was presented, in part, at the Sixth International Symposium on Artificial Life and Robotics, Tokyo Japan, January 15–17, 2001     

Numerical study of fracture propagating through column and brace of Ashiyahama residential building in Kobe earthquake

There are significant unprecedented structural damages at Ashiyahama residential high‐rise steel building complex due to the Hyogo‐ken Nanbu Earthquake (Kobe Earthquake), which occurred on January 17, 1995. This paper is concerned with two issues of steel fracture observed in the mega‐structure that have been attracting the special attention of structural engineers. These are fracture propagating through very thick‐plated steel column and brace, and brittle‐type fracture at column–column welded connections. The cause of the former damage is first examined using numerical computation with recourse to an explicit method of dynamic analysis based on a continuous medium model. By taking account of the complexity of the mega‐structure, and of the limitation of numerical computation, the analysis is carried out in two distinct steps. In the first approach, the global frame is dynamically analysed on the basis of beam element modelling; the second approach calls for an analysis, based on shell element modelling, of a partial frame that is composed of the joint and the adjacent brace, beam and columns. It turns out that the axial breakage is initiated from the brace and propagates through the column. The second issue of the fracture at column–column welded connections is investigated with consideration to energy balance, or the difference in the total energy across the boundary between the two elements connected at the weld. The paper concludes from a practical point of view with recommendations to enhance earthquake‐resistant capability in the structural design. Copyright © 2004 John Wiley & Sons, Ltd.     

TLR4-Mediated Inflammatory Responses Regulate Exercise-Induced Molecular Adaptations in Mouse Skeletal Muscle

Endurance exercise induces various adaptations that yield health benefits; however, the underlying molecular mechanism has not been fully elucidated. Given that it has recently been accepted that inflammatory responses are required for a specific muscle adaptation after exercise, this study investigated whether toll-like receptor (TLR) 4, a pattern recognition receptor that induces proinflammatory cytokines, is responsible for exercise-induced adaptations in mouse skeletal muscle. The TLR4 mutant (TLR4m) and intact TLR4 control mice were each divided into 2 groups (sedentary and voluntary wheel running) and were housed for six weeks. Next, we removed the plantaris muscle and evaluated the expression of cytokines and muscle regulators. Exercise increased cytokine expression in the controls, whereas a smaller increase was observed in the TLR4m mice. Mitochondrial markers and mitochondrial biogenesis inducers, including peroxisome proliferator-activated receptor beta and heat shock protein 72, were increased in the exercised controls, whereas this upregulation was attenuated in the TLR4m mice. In contrast, exercise increased the expression of molecules such as peroxisome proliferator-activated receptor-gamma coactivator 1-alpha and glucose transporter 4 in both the controls and TLR4m mice. Our findings indicate that exercise adaptations such as mitochondrial biogenesis are mediated via TLR4, and that TLR4-mediated inflammatory responses could be involved in the mechanism of adaptation.     

Development of insulation technology in compact SF6 gas‐filled bushings: Development of compact 800‐kV SF6 gas‐filled bushings

Efforts of designers of gas‐insulated switchgear (GIS) are currently focused on such features as smaller installation area and economical efficiency. Circuit breakers (CB), disconnecting switches (DS), and earthing switches (ES) have been redesigned in more compact configurations. Compactness and light‐weight requirements are applied also to bushings used in GIS. GIS bushings can be divided in three general types: capacitor, gas‐filled, and molded bushings. Requirements of the light weight and the economical efficiency of gas‐filled bushings can be satisfied by improvements in insulation technology. Size reduction can be effectively achieved by moderation of the electric field strength on the outside surface of the hollow insulator in the area of the inner grounded electrode tip. We devised a new inner grounded electrode structure consisting of a cylindrical electrode and a ring electrode supported by column electrodes. This paper describes the effect of reduction of the maximum value of electric field strength on the outside surface of the hollow insulator by a new type of grounded electrode. Then, improvement of insulation performance for electrodes with insulation coating in SF₆ gas is described as the composite insulation technology. Finally, the efficiency of these insulation technologies is described by the basic insulation test results of a prototype compact 800‐kV SF₆ gas‐filled bushing. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(1): 19–27, 2010; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20898     

Temperature‐Induced Hydrogels Through Self‐Assembly of Cholesterol‐Substituted Star PEG‐b‐PLLA Copolymers: An Injectable Scaffold for Tissue Engineering

Partially cholesterol‐substituted 8‐arm poly(ethylene glycol)‐block‐poly(L ‐lactide) (8‐arm PEG‐b‐PLLA‐cholesterol) has been prepared as a novel star‐shaped, biodegradable copolymer derivative. The amphiphilic 8‐arm PEG‐b‐PLLA‐cholesterol aqueous solution (polymer concentration, above 3 wt%) exhibits instantaneous temperature‐induced gelation at 34 °C, but the virgin 8‐arm PEG‐b‐PLLA does not, irrespective of concentration. Moreover, an extracellular matrix (ECM)‐like micrometer‐scale network structure has been created with favorable porosity for three‐dimensional proliferation of cells inside the hydrogel. This network structure is mainly attributed to specific self‐assembly between cholesterol groups. The 10 and 20 wt% hydrogels are eroded gradually in phosphate buffered saline at 37 °C over the course of a month, and after that the gel becomes completely dissociated. Moreover, L929 cells encapsulated into the hydrogel are viable and proliferate three‐dimensionally inside the hydrogels. Thus, in‐vitro cell culture studies demonstrate that 8‐arm PEG‐b‐PLLA‐cholesterol is a promising candidate as a novel injectable cellular scaffold.