Carbon Nitride Loaded with an Ultrafine,Monodisperse, Metallic Platinum-Cluster Cocatalyst for the Photocatalytic Hydrogen-Evolution Reaction

For the realization of a next-generation energy society, further improvement in the activity of water-splitting photocatalysts is essential. Platinum (Pt) is predicted to be the most effective cocatalyst for hydrogen evolution from water. However, when the number of active sites is increased by decreasing the particle size, the Pt cocatalyst is easily oxidized and thereby loses its activity. In this study, a method to load ultrafine, monodisperse, metallic Pt nanoclusters (NCs) on graphitic carbon nitride is developed, which is a promising visible-light-driven photocatalyst. In this photocatalyst, a part of the surface of the Pt NCs is protected by sulfur atoms, preventing oxidation. Consequently, the hydrogen-evolution activity per loading weight of Pt cocatalyst is significantly improved, 53 times, compared with that of a Pt-cocatalyst loaded photocatalyst by the conventional method. The developed method is also effective to enhance the overall water-splitting activity of other advanced photocatalysts such as SrTiO₃ and BaLa₄Ti₄O₁₅.     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

The structure of the core polyol of the ether lipids fromSulfolobus acidocaldarius

The major ether-type lipid structures ofSulfolobus acidocaldarius (ATCC33909) were composed of caldarchaeol and calditoglycerocaldarchaeol. However, the characterization by nuclear magnetic resonance spectroscopy and mass spectrometry showed that the structure of calditol in calditoglycerocaldarchaeol is not nonitol, 2-(1′,2′,3′-trihydroxypropyl)1,2,3,4,5,6-hexahydroxyhexane, but 2-hydroxymethyl-1-(2,3-dihydroxypropoxy),2,3,4,5-cyclopentanetetraol with an ether linkage in the molecule. Such an intermolecular ether linkage was resistant, to BCl₃ treatment, but nonresistant to 57% HI degradation treatment conducted at 100°C for 60 h, producting 2-hydroxymethyl-1,2,3,4,5-cyclopentanepentaol from calditol as reaction product. Further, it was confirmed that the structure of calditol is essentially a derivative of glycerol, and hydrocarbon chains were conjugated to the glycerol-like site in the structure. The calditol with an ether linkage in the molecule suggested an important role regarding the properties of heat-resistance and acid-resistance observed inSulfolobales. Presented at the international workshop on “Molecular Biology and Biotechnology of Extremophiles and Archaebacteria,” Wako, Japan, August 1993.     

Ethanol and lactic acid production using sap squeezed from old oil palm trunks felled for replanting

Old oil palm trunks that had been felled for replanting were found to contain large quantities of high glucose content sap. Notably, the sap in the inner part of the trunk accounted for more than 80% of the whole trunk weight. The glucose concentration of the sap from the inner part was 85.2 g/L and decreased towards the outer part. Other sugars found in relatively low concentrations were sucrose, fructose, galactose, xylose, and rhamnose. In addition, oil palm sap was found to be rich in various kinds of amino acids, organic acids, minerals and vitamins. Based on these findings, we fermented the sap to produce ethanol using the sake brewing yeast strain, Saccharomyces cerevisiae Kyokai no.7. Ethanol was produced from the sap without the addition of nutrients, at a comparable rate and yield to the reference fermentation on YPD medium with glucose as a carbon source. Likewise, we produced lactic acid, a promising material for bio-plastics, poly-lactate, from the sap using the homolactic acid bacterium Lactobacillus lactis ATCC19435. We confirmed that sugars contained in the sap were readily converted to lactic acid with almost the same efficiency as the reference fermentation on MSR medium with glucose as a substrate. These results indicate that oil palm trunks felled for replanting are a significant resource for the production of fuel ethanol and lactic acid in palm oil-producing countries such as Malaysia and Indonesia.     

Positive-temperature-coefficient effect of electrical resistivity below melting point of poly(vinylidene fluoride) (PVDF) in Ni particle-dispersed PVDF composites

This paper discusses the positive-temperature-coefficient effects of resistivity in Ni particle-dispersed poly(vinylidene fluoride) (PVDF) composites based on experiment results from SEM, DSC, and pressure-volume-temperature (PVT) measurements. The melting points of composites with Ni content of 20, 30, 40, and 50vol.% were equal to that of pure PVDF. The PTC effects in composites with Ni content of 40 and 50vol.% occurred at temperatures near the melting point of the PVDF matrix, whereas those in composites with Ni content of 20 and 30vol.% occurred at temperatures below the melting point of the PVDF matrix. We found that the PTC effect occurs even without melting of the matrix polymer. Moreover, we determined that a slight increase in specific volume at temperatures below the melting point of the matrix polymer acts fully as a driving force for forming a gap between fillers. This suggestion was backed up by theoretical analyses using percolation theory and a thermal-fluctuation-induced tunneling model.     

DFT-based FEM analysis of nonlinear effects on indentation process in diamond crystal

We apply a new framework of a finite-element method (FEM) analysis with constitutive relations based on density functional theory (DFT), as an efficient method to characterize the nonlinear and anisotropic elastic deformation of single-crystal diamond. In our scheme, the stress-strain relations are obtained during FEM analysis on the fly based on the plane-wave-based DFT total-energy calculations and their numerical database is simultaneously constructed, which enables us to obtain high-precision stress without any empirical parameters even under finite strained conditions. To check its validity and accuracy, the shear deformation behavior of diamond crystal is analyzed under the strained condition. Then we examine the nonlinear effects on the indentation deformation of diamond single crystal, by comparing the results from the DFT-based constitutive relations with those from the linear elastic ones.     

Intravascular ultrasound in determining the end point of percutaneous transluminal coronary angioplasty

Intravascular ultrasound (IVUS) imaging was used to measure internal luminal area immediately after percutaneous transluminal coronary angioplasty (PTCA) in 83 patients (59 males, 24 females, mean age 63 +/- 12 years) with angina pectoris to determine the need for additional intervention. The effectiveness of these interventions to prevent restenosis was also studied. Thirty-five patients (42%) with insufficient dilatation revealed an internal luminal area less than 5 mm2 or luminal stenosis greater than 60% as evaluated by IVUS imaging following the procedure. The luminal area increased from 4.5 +/- 1.1 to 7.9 +/- 2.8 mm2 and the percentage luminal stenosis improved from 66 +/- 9% to 54 +/- 9% in patients who underwent further dilatation with a larger size balloon, longer dilatation time, directional coronary atherectomy, or stenting. The insufficient dilatation group exhibited hard plaque and calcification more frequently than in the other group (48 patients, 58%) in whom sufficient dilatation of the target lesion was achieved. The incidence of restenosis in the sufficient dilatation group was 25%, compared to 33% of the patients receiving additional treatment after IVUS imaging and 42% in the 192 patients who underwent PTCA without IVUS imaging. IVUS imaging is a useful method for evaluation of complex luminal morphology to decrease the incidence of restenosis and for determination of the end point and the extent of dilatation required.     

Trace gas measurement with an integrated porous tube collector/long-path absorbance detector

Porous membrane tubes filled with an absorbing solution that change colors upon selective reactions with specific gases provide high sensitivity inexpensive gas sensors. These can be routinely used for ambient monitoring in a fully automated manner. We consider both stopped and continuous flow operations and show the superiority of the stopped flow mode theoretically and experimentally. Light throughput through various membrane tubes is presented, and superior performance of such tubes over Teflon AF is shown. Sensors for NO2 and for O3 were based on Griess-Saltzman and indigotrisulfonate chemistries, respectively. A computer-controlled two-LED absorbance measurement system (one wavelength monitors the signal, the other references the system) that also governs automated reagent refilling was implemented. Sub-parts-per-billion-volume detection limits are attainable within a few minutes for both gases. Comparative data with a commercial UV-photometry-based ozone monitor showed excellent agreement with the response pattern of the present instrument. Low cost, ready applicability to the measurement of different gases by merely changing the light source and chemistry, and high sensitivity makes this instrument attractive for both pedagogic and practical purposes.