Vibrationally Excited CO2 Formed in CO + NO Reaction on Pd(110) Surface in High Surface Temperature Range

The infrared chemiluminescence spectra of CO₂ formed during steady-state CO+NO reaction over Pd(110) indicated that the temperature of the bending vibrational mode was much higher than that of the antisymmetric one at higher surface temperatures such as 800–850 K. Especially, in the high temperature range, more vibrationally excited CO₂ was formed from CO+NO reaction than CO+O₂ reaction. On the basis of the result, we propose the model structure of reaction intermediates for CO₂ formation in CO+NO reaction, which is different from that in CO+O₂ reaction.     

Cerebral Hyperperfusion after Revascularization Inhibits Development of Cerebral Ischemic Lesions Due to Artery-to-Artery Emboli during Carotid Exposure in Endarterectomy for Patients with Preoperative Cerebral Hemodynamic Insufficiency: Revisiting the “Impaired Clearance of Emboli” Concept

The purpose of the present study was to determine whether cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during exposure of the carotid arteries in carotid endarterectomy (CEA). In patients undergoing CEA for internal carotid artery stenosis (≥70%), cerebral blood flow (CBF) was measured using single-photon emission computed tomography (SPECT) before and immediately after CEA. Microembolic signals (MES) were identified using transcranial Doppler during carotid exposure. Diffusion-weighted magnetic resonance imaging (DWI) was performed within 24 h after surgery. Of 32 patients with a combination of reduced cerebrovascular reactivity to acetazolamide on preoperative brain perfusion SPECT and MES during carotid exposure, 14 (44%) showed cerebral hyperperfusion (defined as postoperative CBF increase ≥100% compared with preoperative values), and 16 (50%) developed DWI-characterized postoperative cerebral ischemic lesions. Postoperative cerebral hyperperfusion was significantly associated with the absence of DWI-characterized postoperative cerebral ischemic lesions (95% confidence interval, 0.001–0.179; p = 0.0009). These data suggest that cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during carotid exposure in CEA, supporting the “impaired clearance of emboli” concept. Blood pressure elevation following carotid declamping would be effective when embolism not accompanied by cerebral hyperperfusion occurs during CEA.     

Switched capacitor circuit for 1/f noise generation using a power-law circuit

A simple switched capacitor (SC) circuit is given which realizes a one-dimensional discrete dynamical system X_n+1 = X_n + ux^z generating intermittent chaos with a 1/f-shaped power spectrum. an integrated circuit with a pair of logarithmic and antilogarithmic amplifiters can easily realize the power-law term x^z which plays a key role in generating l/fnoise. an inevitable small offset voltage ? in the SC circuit governs the cut-off frequency of 1/f noise, and when the dynamical system is modified by introducing an effective ?, the ‘indirect method’ enables us to get the precise power spectrum in the modified system.     

Acceleration of the redox kinetics of VO2+/VO2 + and V3+/V2+ couples on carbon paper

The redox kinetics of VO²⁺/VO₂ ⁺ and V³⁺/V²⁺ couples on a carbon paper (CP, HCP030 N, Shanghai Hesen, Ltd., China) electrode were investigated in terms of their standard rate constant (k ₀) and reaction mechanism. The values determined for k ₀ for VO²⁺ ?? VO₂ ⁺ and V³⁺ ?? V²⁺ using the CP electrode are 1.0 × 10^?3 and 1.1 × 10^?3 cm s^?1, respectively. The value of k ₀ increases by one or two order(s) of magnitude compared with values obtained using electrodes composed of pyrolytic graphite and glassy carbon. The acceleration of the redox kinetics of vanadium ions is a result of the large surface area of the CP electrode. An inner-sphere mechanism for the reaction on the surface of the electrode is proposed. The kinetic features of vanadium redox reactions on the CP electrode reveal that CP is suitable for use as the electrodes in vanadium redox-flow batteries.     

Remarkable effect of ordered mesoporous carbon support in tantalum oxide-catalyzed selective epoxidation of cyclooctene

The olefin epoxidation is one of the most important reactions in chemical industry. Metal oxide supports often cause drawbacks in catalytic activity and selectivity, which has been overcome by introducing hydrophobic organic groups onto the oxide supports. The present study utilizes ordered mesoporous carbon (CMK-3 and CMK-1) as structurally defined hydrophobic catalyst support. Well-dispersed tantalum oxides supported on the ordered mesoporous carbon were prepared. Their application in catalytic epoxidation of cyclooctene demonstrates that the tantalum oxide catalysts on the ordered mesoporous carbon supports show higher performances than those of the catalysts supported on activated carbon and ordered mesoporous silica SBA-15.     

Supercritical fluid‐assisted electroless metal plating onto aramid films: The influence of thermal treatment

Although the production of electro‐conductive aramid fibers is efficient, the method needs to be modified before it can be applied to aramid films. Whereas impregnation of an aramid film with a metal complex using supercritical CO₂ is achievable, the relatively low adhesion strength of the metal layer applied using electroless copper plating is problematic. To solve this problem, thermal treatment was conducted before, after, or both before and after electroless plating. The rationale for using thermal treatment to improve the adhesiveness of the plated layer was based on the findings that (1) an aramid film contains a significant amount of water (about 3.5 % w.o.f.), which might have a negative impact on adhesion; and (2) because an impregnated metal complex liberates metal catalyst by thermal decomposition during impregnation, a supplementary thermal action might liberate more catalyst and thereby improve adhesion. We found that thermal treatment improved adhesion of the metal layer to the aramid film. Moreover, we discovered that with respect to electroless copper plating, a short time‐lag was crucial to obtaining a thin and homogeneous metal layer with strong adhesion. In addition, we demonstrate the affinity of an aramid film for Pd(acac)₂. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

循环流化床厌氧氨氧化反应器脱氮性能研究

对循环流化床上部附加无纺布作填料的固定床复合式厌氧氨氧化反应器的性能进行了研究,通过控制废水的循环量来调节反应器底部微生物颗粒的流化状态,并对反应器内对富集的厌氧氨氧化菌除氮性能进行了研究。结果表明,反应器稳定运行270 d,总氮去除率及亚硝氮去除率分别维持在80%及90%以上;最大氮负荷达到15.2 kg/m3.d-1,相应的最大氮去除速率达9.9 kg/m3.d-1。通过批实验,得到反应器稳定运行期厌氧氨氧化菌比活性为0.3 kg/k.gd-1。出水悬浮物(SS)浓度检测、微生物颗粒粒径分布测试、微生物颗粒的扫描电镜(SEM)观测结果均表明,循环流化床厌氧氨氧化反应器具有较高的生物滞留能力,形成的微生物颗粒具有较佳性能。采用荧光原位测定(FISH)分析结果显示,厌氧氨氧化菌在反应器微生物群落中含量超过70%。     

Catalyst Design of Pt-Modified Ni/Al2O3 Catalyst with Flat Temperature Profile in Methane Reforming with CO2 and O2

Pt(0.3)/Ni(10)/Al₂O₃, prepared by a sequential impregnation method, exhibited a more excellent performance in methane reforming with CO₂ and O₂ in terms of the catalytic activity and the temperature profile of the catalyst bed than Pt(0.3) + Ni(10)/Al₂O₃ prepared by a coimpregnation method, Ni(10)/Al₂O₃, Pt(0.3)/Al₂O₃, and Pt(10)/Al₂O₃. It is thought that this is because the surface Pt atoms on Ni catalyst can contribute to the enhancement of the catalyst reducibility.     

New class of cellulose fiber spun from the novel solution of cellulose by wet spinning method

A novel cellulose solution, prepared by dissolving an alkali-soluble cellulose, which was obtained by the steam explosion treatment on almost pure natural cellulose (soft wood pulp), into the aqueous sodium hydroxide solution with specific concentration (9.1 wt %) was employed for the first time to prepare a new class of multifilament-type cellulose fiber. For this purpose a wet spinning system with acid coagulation bath was applied. The mechanical properties and structural characteristics of the resulting cellulose fibers were compared with those of regenerated cellulose fibers such as viscose rayon and cuprammonium rayon commercially available. X-ray analysis shows that the new cellulose fiber is crystallographically cellulose II, and its crystallinity is higher but its crystalline orientation is slightly lower than those of other commercial regenerated fibers. The degree of breakdown of intramolecular hydrogen bond at C₃[X_am(C₃)] of the cellulose fiber, as determined by solid-state cross-polarization magic-angle sample spinning (CP/MAS) ¹³C NMR, is much lower than other, and the NMR spectra of its dry and wet state were significantly different from each other, indicating that cellulose molecules in the new cellulose fiber are quite mobile when wet. This phenomenon has not been reported for so-called regenerated cellulose fibers.     

Effect of a low-fat diet enriched with oleic acid on postprandial lipemia in patients with type 2 diabetes mellitus

The aim of the present study was to compare the effects of a low-fat diet enriched with oleic acid to those of a low-fat diet enriched with linoleic acid on fasting lipids, postprandial lipemia, and oxidative susceptibility of low-density lipoprotein (LDL) in patients with type 2 diabetes mellitus (DM). In a 3-wk randomized crossover study, eight patients with type 2 DM were given an experimental low-fat diet enriched with either oleic acid or linoleic acid. The oleic-acid-enriched diet contained 5, 15, and 5% energy from saturated, monounsaturated, and polyunsaturated fatty acids, and the linoleic-acid-enriched diet contained 5, 5, and 15% energy from saturated, monounsaturated, and polyunsaturated fatty acids, respectively. In addition to evaluating the fasting lipids and oxidative susceptibility of LDL, we evaluated postprandial lipemia using an oral fat load at the end of each 3-wk dietary phase. There were no significant differences in fasting lipid profile or lag time of LDL oxidation between the two experimental dietary phases. The average and maximal increments of remnant-like particle (RLP) cholesterol levels during oral fat load were significantly higher after the oleic-acid-enriched dietary phase than after the linoleic-acid-enriched dietary phase. The area under the curve of RLP cholesterol was also significantly larger after the oleicacid-enriched dietary phase than after the linoleic-acid-enriched dietary phase. These results suggest that the oleic-acidenriched diet was associated with increased formation of postprandial chylomicron remnants compared with the linoleicacid-enriched diet.