Penicillium camemberti and Penicillium roqueforti enhance the growth and survival of Shiga toxin-producing Escherichia coli O157 under mild acidic conditions

The effects of secondary starter molds of common mold-ripened cheeses on the Shiga toxin-producing Escherichia coli (STEC) O157 were assessed in 3 model systems. In the 1st model, 8 STEC O157 strains were incubated in the spent culture of Penicillium camemberti or Penicillium roqueforti under mild acidic conditions at 25 °C. In the spent cultures of the mold at pH 4.8 to 5.0, the lag times of STEC O157 growth were significantly shorter than those observed in fresh medium. Analyses of the spent culture of P. camemberti showed that the causative agents of the growth enhancement were produced by the mold in response to an acidic environment and were not fully inactivated in heat treatment. In the 2nd model, P. camemberti and STEC O157 were cocultured in acidified milk at 25 °C. The population of STEC O157 reached 10(8) CFU/mL in the presence of the mold, whereas the population steadily declined in the absence of the mold. Although this growth enhancement was partially attributable to alkalization by the mold, it was observed even when the pH of this model was stabilized. In the 3rd model, 2 STEC O157 strains were incubated in the spent cultures of molds at pH 4.5 at 10 °C. In the spent culture, proportions of injured cells were significantly lower and D values were significantly higher than those in control, except one STEC O157 strain in the spent culture of P. camemberti. These results showed that the molds could enhance the growth and survival of STEC O157 by changing the environment. Practical Application: This study demonstrated that molds in foods can improve the growth and survival of the Shiga toxin-producing Escherichia coli O157. Because microbial interactions are ubiquitous in food, our results provide an important insight for understanding the behavior of microorganisms in food.     

Needle penetrometry with variable force loading for measuring viscosity of pelletized coal upon heating

A needle penetrometry was performed loading steady force in a range from 1×10⁻³ to 2 N to pelletized coal upon heating via a cylindrical needle. From the observed effects of shear rate on apparent viscosity of softening coal pellet, defined as the shear-rate to shear-stress ratio, it was found that the pellet behaved as a Newtonian fluid for shear rates lower than a critical one while as a pseudo-plastic fluid for higher shear rates. The penetrometry was also carried out varying the force with time. The variable force loading enabled to maintain the shear rate well below the critical one, and thereby to measure the apparent viscosity of coal pellets as Newtonian fluids over a temperature range from 600 to 800 K. Upon heating at 10 K min⁻¹, the apparent viscosity of Goonyella coal pellet decreased from about 10¹⁰ Pa s at 640 K down to a minimum of about 10⁴ Pa s at 755 K, and increased up to 10⁹ Pa s at 800 K. In a course of heating as above, the viscosity of Blind Canyon coal pellet decreased above 600 K, underwent a minimum of about 10⁶ Pa s at 715 K, and increased up to 10¹⁰ Pa s at 770 K. Decreasing the heating rate from 10 to 3 K min⁻¹ caused the minimum viscosities of the pellets to increase by 1-2 orders of magnitude.     

Surface modification of III-V compound semiconductors using surfaceelectromagnetic wave etching induced by ultraviolet lasers

The surface modification of semiconductors by laser-induced surface electromagnetic wave (SEW) etching was investigated. With the novel etching method using a holographic exposure system, submicron periodic dot structures were fabricated directly on semiconductor substrates (n-InP, n-GaAs, and InGaAs-InP). Making use of laser polarization dependence in this etching system, a variety of surface modifications could be achieved on the semiconductors. In particular, in the case of using the s-polarization light, periodic submicron dot structures with a geometrical diameter down to 80 nm could be obtained directly using a single-step process without a mask. The InGaAs-InP dot structures were studied optically by means of photoluminescence spectroscopy, and the blue shift of the photoluminescence energy up to 5.36 meV was observed for the smallest dots, which displayed a lateral quantization     

A new concept of nuclear fuel reprocessing by applying ion-exchange technology

The development of advanced technology for the spent nuclear fuel reprocessing should be achieved not only considering cost, non proliferation and reduction of radioactive wastes but also corresponding to both spent nuclear fuels of LWR and FBR.

We have proposed an ion exchange process for reprocessing using a new type ion exchanger developed to chemical method of U enrichment technology. This process possess possibility of a sharp cut in cost, since this ion exchanger is characterized by rapid adsorption-desorption rate dominating the treatment rate.

From the basic experimental results, this reprocessing process has been constructed by 3 ion exchanger columns which consist of a main separation column, the uranium-refining column and the plutonium-refining column.

Comparing ion exchange process with the conventional Purex process, this ion exchange process has many advantages such as the decrease in the number and size separation equipment, solvent-spent free and alkaline-liquid-spent free. With these advantages, this process is estimated that the construction cost of reprocessing process is greatly reduced comparing to the conventional process.     

An autopsy case of adult onset glycogen storage disease type Ia

A 3-week tour of the Far East was coordinated by Dr. Ronald DeWald, senior travelling fellow appointed by the Scoliosis Research Society. Three junior fellows appointed by the Education Committee of the Scoliosis Research Society accompanied him. The purpose of this fellowship was to develop a comaraderie and exchange ideas, thoughts, and experiences in the field of spinal deformity.     

Configuration of a voltage sag compensator by use of a micro‐SMES and experimental results

A voltage sag compensating using a micro‐SMES is presented. Based on previous works, we have carried out experiments for voltage sag compensation on the laboratory‐built system in order to validate the proposed minimum energy injection voltage sag compensation algorithm. To improve the compensating performance of the system, two‐degree‐of‐freedom voltage control is proposed. In this paper, the circuit configuration and feedback voltage control system of the compensator are described and the experimental results are reported. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(2): 84–92, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10267     

Enhancement of ectopic bone formation in mice with a deficit in Fas-mediated apoptosis

Bone formation is under the control of cytokines as well as growth factors such as bone morphogenetic proteins (BMP). This suggests the possibility that osteogenesis might be modulated by factors which also modulate the immune system. To test whether immune disorders in the host may influence bone formation, we studied BMP-induced bone formation in a C3H/HeJ strain of mice bearing a mutant gene, the lymphoproliferation gene (lpr) or the generalized lymphoproliferative disease gene (gld), both of which are known to be a Fas deletion mutant and a Fas ligand mutant, respectively, and to induce immune disorders via a deficit in Fas-mediated apoptosis. Crude BMP derived from bovine bone were injected into the muscular tissue in the femur of adult C3H/HeJ mice or C3H/HeJ mice bearing an lpr or gld gene. Quantitative analysis of the resulting ectopic bone formation by X-ray photography 2 weeks after injection revealed that the presence of either the lpr or gld gene caused a bone mass significantly larger in dimension than that seen in the wild type mice. Histological examination also revealed the different influence between these mutant genes on the level of bone formation exhibited by hyaline cartilage and bone trabeculae. Based on these results, we discussed the possible mechanisms of the enhanced ectopic bone formation under the deficit in Fas-mediated apoptosis.