OSI参考模型与B—ISDN协议参考模型的比较

分析了ＯＳＩ参考模型和Ｂ－ＩＳＤＮ协议参考模型之间的关系，为Ｂ－ＩＳＤＮ与以ＯＳＩ为标准的数据网的互联打下了基础。     

制革用水乳型聚氨酯涂饰剂行业标准的制定

本文概述了制定该标准的背景，对标准的主要内容加以科学的阐述。     

聚碳硅烷的分子量分布与可纺性研究

阐述了聚碳烷的合成及其分子量分布，讨论了高低分子含量对聚碳硅烷熔点及可纺性的影响，而且提出了分子量分布的控制标准与方法。     

β－C_2S固溶体稳定的热力学研究

从热力学理论出发，利用Ｘ射线衍射定性和定量的方法，对β－Ｃ＿２Ｓ固溶体的稳定性进行了分析和研究。经热力学理论推导得出β－Ｃ＿２Ｓ稳定的热力学条件，即掺入的微量元素的化学位μ＿ｉ须小于β－Ｃ＿２Ｓ的反应自由焓△Ｇ＿β，μ＿ｉ＜△Ｇ＿β．并定量地计算出一种微量元素稳定β－Ｃ＿２Ｓ的临界掺加量为；多种微量元素对β－Ｃ＿２Ｓ的稳定性判断条件为：     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

吏用Authorware开发CAI多媒体课件的几个关键技术

本文以CAI课件的开发制作过程遇到的一些关键的技术问题加以探讨．并结合实际制作介绍了一些技艺方法、     

OFA-II型定量荧光仪在油气勘探中的应用

定量荧光仪在现场应用中受到各种因素的影响:如岩屑样品浸泡时的干、湿;图谱是否出现了淬灭;环境温度的影响等等。文章通过具体事例给出解决这些问题的办法。     

波尔多液与石硫合剂的配制

波尔多液的配制。波尔多液是应用范围很广的杀菌剂,它是由硫酸铜、石灰和水混配而成的药液.配制原料：硫酸铜为蓝色的块状结晶,石灰以块状的生石灰为好.如果没有生石灰,使用粉状的消石灰也可,但用量要加大到30%.     

从复印机纸盒结构看人性化设计

静电复印机是常用的办公设备,复印时要将不同规格的复印纸装入纸盒,经常需要操作者对纸盒进行调整。从使用者的角度讲,要用最小的力气、最简便的方法来完成对机器的操纵。这就需要考虑进行人性化设计。纸盒调整主要有自动监测纸盒尺寸的功能和纸盒内侧挡板(导纸板)的调整。对比不同品牌和不同机型复印机的纸盒设计,可看出人性化设计对方便操作者使用的重要性,也为购买机器时提供了借鉴。