Temperature dependence of hydrogenated amorphous silicon thin-film transistors

The temperature dependence characteristics of hydrogenated amorphous silicon thin-film transistors were investigated. The results indicate that as the temperature was increased, the threshold voltage and the field-effect mobility were first increased, and then decreased, which may be controlled by different mechanisms at low and high temperatures. In addition, if the temperature was higher than 420 K, the Fermi level was promoted to the degenerate-like states, the current channel always existed due to the temperature effect, and the threshold voltage became negative.     

The use of doped polyaniline as an electrode in the galvanic anodic protection of ferrous metals in industrial acid solutions

In order to investigate the galvanic anodic protection (GAP) of ferrous metals (such as 410, 304 and 316 stainless steels) in acid solutions by doped polyaniline (PANi), separate doped PANi powder-pressed electrodes with different surface areas (the area ratio of the PANi electrode to stainless steel is between 1:1 and 1:2) have been prepared. These were coupled with ferrous metal in the following solutions: 5 M sulphuric acid, 5 M phosphoric acid and industrial phosphoric acid (containing 5 M phosphoric acid and 0.05% chloride ion) to construct a galvanic cell, in which PANi is cathode while ferrous metal is anode. The results indicate that a PANi electrode with sufficient area can provide corrosion protection to stainless steel in these acidic solutions. A pilot scale coupling experiment was carried out. The results indicate that PANi is a promising material as an electrode for the anodic protection of ferrous metals in acidic solutions in industrial situations.     

Effects of free convection and mass transfer on the flow past an impulsively moving infinite vertical circular cylinder

The effects of free convection and mass transfer are taken into account for the Stokes' problem of the flow near an impulsively moving infinite vertical circular cylinder. Expressions of the velocity, temperature, concentration and skin friction of the fluid in closed form are obtained by the Laplace transform technique. The results based on various values of the parameters Gr (Grashof number), Gm (modified Grashof number), Sc (Schmidt number) and Pr (Prandtl number) are given in graphical form. It will be seen that there is a rise in the velocity due to the presence of a foreign mass. But higher Sc yields the lower velocity and skin friction. As the radius of the circular cylinder approaches to infinite, the results presented in this paper agree with those of V.M. Soundalgekar's and C.K. Chen's etc. for the flow past an impulsively moving infinite vertical plate.     

Multi-H phase-coded modulations with asymmetric modulationindexes

Multi-H phase-coded modulation (MHPM) is a bandwidth-efficient modulation scheme which offers substantial coding gain over conventional digital modulation schemes. MHPM with asymmetric modulation indices corresponding to the bipolar data +1 and -1 is considered, and numerical results for the minimum Euclidean distances are provided. It is shown that performance improvements on the error probability over conventional MHPM are gained with essentially the same bandwidth and a very slight modification in implementation. The upper bounds on the error probabilities as functions of observation intervals and received E_b/N₀ are also investigated in detail. It is concluded that the concept of asymmetric modulation indices for MHPM is attractive for bandwidth and power-efficient modulation     

肝单光子发射计算机断层若干物理因素的讨论

我们于1985年对我院1984年开展肝单光子发射计算机断层以来的52例肝病人进行了分析总结。结果表明,肝单光子发射断层在诊断肝内占位性病变方面比普通肝静态γ照相有许多优点。需要指出的是,肝单光予发射断层的若干优点及诊断的准确性是与物理条件的正确选择和应用密切相关的。本文根据至今积累的近100例断层经验,从技术方面介绍了影响单     

A theoretical elastic analysis of spherical thin shell segments in pressure vessels with a circular hole under transverse load P0 and Moment M0

In this paper, according to the theory of thin shells, the uniformly valid asymptotic homogeneous solution and the exact particular solution are derived for spherical thin shell segments with a circular hole under transverse load $\text{P}{}_0$ and moment $\text{M}{}_0$.     

秦山核电厂蒸汽发生器带钧波形板蒸汽干燥器的设计

文中详细介绍了秦山核电厂蒸汽发生器带钩波形板蒸汽干燥器的设计观点。     

ALUM SHALE BITUMEN MATURATION AND MIGRATION: IMPLICATIONS FOR GOTLAND'S OIL

Thermal maturation of Swedish Alum Shale kerogen and bitumen has been determined from core samples from Eastern and Central Sweden. In samples from Eastern Sweden (Öland and Gotland), the kerogen and bitumen are thermally immature with respect to petroleum generation. In some areas of Central Sweden (Närke, ÖstergÖtland, and Kinnekulle in VästergÖtland), the kerogen is immature, whereas the bitumen is marginally mature to mature. In other areas of Central Sweden (Halleberg-Hunneberg in VästergÖtland), the kerogen is supermature and the bitumen mature. This suggests that bitumen from a mature source-rock has migrated into the Alum Shales of Central Sweden. Migration in Central Sweden is further evidenced by the occurrence of obviously-migrated bituments in vugs and voids in the organicpoor Ordovician limestone overlying the Alum Shale in Central Sweden, and in concretions within the Alum Shale itself. Based on biomarker distributions of extracted bitumen, Alum Shale kerogen pyrolysate and obviously-migrated oils, and the fact that the Alum Shale in most of the areas studied is the only petroleum source-rock extant, it is suggested that the migrated bitumen in Central Sweden is from the Alum Shale itself. Bitumen has migrated from areas where the Alum Shale is in close proxmity to Permo-Carboniferous intrusions, such as Halleberg-Hunneberg, into nearby areas such as Närke and ÖstergÖtland, where there is no evidence of intrusion and the indigenous organic matter is thermally immature. Other areas, where Alum Shales were associated with intrusions and consequently sourced oil, may have been eroded away. There are producing wells on the island of Gotland, where the Alum Shale is also thermally immature. It is therefore assumed that heating which was responsible for generating Gotland's oil was very localized (such as by an intrusion) or that the oil has migrated from a thermally moremature, distant area. On the basis of reservoir rock porosity, and the fact that the Alum Shale of Gotland contains no migrated component, localized heating is favored.