二次盐水精制采用5台树脂塔流程简介

介绍了国内首创的离子膜盐水二次精制塔工艺,运行6 a证明本工艺是投资省、见 效快,生产能力大,又切实可行的工艺方法。     

Catalytic activities and properties of mesoporous sulfated Al2O3–ZrO2

Mesoporous sulfated Al₂O₃–ZrO₂ (MSAZ) catalysts with large surface areas and pore volumes after calcination at high temperature (650 °C) and with higher Al₂O₃ content than 20wt% were successfully prepared from a template of block copolymer (P84). The MSAZ catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption, transmission electron microscopy (TEM), ²⁷Al magic-angle spinning nuclear magnetic resonance (MAS NMR), thermogravimetric analysis (TG–DTG), temperature-programmed desorption of ammonia (NH₃-TPD) and infrared spectra (IR) of adsorbed pyridine. It is shown that the resulting mesostructured sulfated Al₂O₃–ZrO₂ samples have a well-developed textural mesoporosity. The number of acid sites present on MSAZ catalysts is higher than that on conventional sulfated zirconia, and the former catalysts are more active than the latter one for various acid-catalyzed reactions.     

以显微荧光检验法检测常用盖印材料

显微荧光检验法是显微检验的一个重要角度,由于缺少基础性研究,这一方法在文件检验中的运用并不广泛.着重考虑曝光时间这一因素,以盖印材料的荧光特性为观察角度,运用显微荧光检验法对大量常用盖印材料进行系统、全面的观察和研究.研究表明,绝大部分盖印材料可被激发出荧光,每种盖印材料的荧光特性都有各自的规律性特点.     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

VR技术对地下步行商业街心理环境辅助设计初探

文章力图以VR（虚拟现实）技术手段应用于城市地下步行商业街规划设计,来解决当前传统规划手段地下步行商业街规划中普遍存在的对其心理环境构筑的忽视和考虑不完善的诟病,以期最大限度消除规划设计中消极空间的产生,并对其关键技术进行了研究和探讨     

Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material

A new type of high temperature energy storage material was obtained through the melt infiltration method, using compounding SiC ceramic foam as matrix and Na₂SO₄ as phase change material. The resulting composite material was measured by XRD, SEM, TG-DSC methods. The experimental results indicate that the composite is composed of silicon carbide, sodium sulfate and square quartz, and no chemical reactions occurs between Na₂SO₄ and SiC matrix. Na₂SO₄ has a good bonding with the SiC ceramic foam matrix. As the composite material is characterized by high thermal energy storage density and high thermal conductivity, it is suit for energy storage under high temperature. Funded by the “863” Hi-Tech Research and Development Program of China (2008AA05Z418)     

汽车涂料使用的颜料（Ⅰ）

汽车涂料是一种高质量涂饰剂，其制造必须要使用一些具有多方面优良性能的高级颜料。本文对汽车涂料使用的各色颜料的选择作以推荐。     

Finite Time Synchronization of Delayed Quaternion Valued Neural Networks with Fractional Order

Neural Processing Letters - In this article, the finite time (FT) synchronization problem of fractional order quaternion valued neural networks with time delay is investigated. Without separating...     

Nonsmooth spatial frictional contact dynamics of multibody systems

Multibody System Dynamics - Computational prediction of 3D crutch-assisted walking patterns is a challenging problem that could be applied to study different biomechanical aspects of crutch walking...