混合制冷工质核态沸腾的传热研究

Heat transfer coefficients in nucleate pool boiling were measured on a horizontal copper surface for refrigerants, HFC-134a, HFC-32, and HFC-125, their binary and ternary mixtures under saturated conditions at 0.9MPa. Compared to pure components, both binary and ternary mixtures showed lower heat transfer coefficients.This deterioration was more pronounced as heat flux was increased. Experimental data were compared with some empirical and semi-empirical correlations available in literature. For binary mixture, the accuracy of the correlations varied considerably with mixtures and the heat flux. Experimental data for HFC-32/134a/125 were also compared with available correlated equation obtained by Thome. For ternary mixture, the boiling range of binary mixture composed by the pure fluids with the lowest and the medium boiling points, and their concentration difference had important effects on boiling heat transfer coefficients.     

A Practical Model for the Interactions Between Hydrating Portland Cements and Poly-β-Naphthalene Sulfonate Condensate Superplasticizers

The performance of poly-β-naphthalene sulfonate condensate superplasticizer (BNS) as a dispersant for cement in concrete is affected severely by slight differences in the characteristics of the cement. In order to be able to predict these effects, a model for estimating the fluidity of cement paste containing BNS is proposed. This model is based on an assumption that the fluidity of cement paste is proportional to the BNS adsorption amount per surface area of hydrated cement (Ad/Hy). BNS is known to show two types of sorption on hydrated cement: one is the bulk absorption into initial hydrates and the other one is the superficial adsorption onto hydrates. Only the superficially adsorbed BNS is expected to work as a dispersant. By assuming a competitive Langmuir-type adsorption on hydrates between BNS and SO₄²⁻, a simple method to estimate Ad/Hy is developed, with the concentrations of BNS and SO₄²⁻ as the only two independent parameters. The resulting estimates of Ad/Hy show a good correlation with paste flow and its change with elapsed time for a broad range of cements. The SO₄²⁻ concentration in the aqueous phase of the cement paste just after the beginning of the mixing is known to affect the performance of BNS as a dispersant. By using the proposed model to discriminate between the superficial adsorption and bulk absorption of BNS, this phenomenon is explained quantitatively.     

Anatase-Type TiO2 and ZrO2-Doped TiO2 Directly Formed from Titanium(III) Sulfate Solution by Thermal Hydrolysis: Effect of the Presence of Ammonium Peroxodisulfate on their Formation and Properties

Anatase-type TiO₂ powder containing sulfur with absorption in the visible region was directly formed as particles with crystallite in the range 15–88 nm by thermal hydrolysis of titanium(III) sulfate (Ti₂(SO₄)₃) solution at 100°–240°C. Because of the presence of ammonium peroxodisulfate ((NH₄)₂S₂O₈), the yield of anatase-type TiO₂ from Ti₂(SO₄)₃ solution was accelerated, and anatase with fine crystallite was formed. Anatase-type TiO₂ doped with ZrO₂ up to 9.8 mol% was directly precipitated as nanometer-sized particles from the acidic precursor solutions of Ti₂(SO₄)₃ and zirconium sulfate in the presence and the absence of (NH₄)₂S₂O₈ by simultaneous hydrolysis under hydrothermal conditions at 200°C. By doping ZrO₂ into TiO₂ and with increasing ZrO₂ content, the crystallite size of anatase was decreased, and the anatase-to-rutile phase transformation was retarded as much as 200°C. The anatase-type structure of ZrO₂-doped TiO₂ was maintained after heating at 1000°C for 1 h. The favorable effect of doping ZrO₂ to anatase-type TiO₂ on the photocatalytic activity was observed.     

Critical Heat Flux of Boiling Heat Transfer in a Moderate Narrow Space

INTanDUCTI0NBoilingheattransferandcriticalheatflux(CHF)inaconfinednarrowspacehavebeenstudiedexperi-melltallybyanumberofinvestigatorsinthepastfewdecades.However,thereisnoanypopularlyacceptedmodelintheheattransferinnarrowspaceboiling,althoughsomepopularknowledgeabouttheboilingheattransferinthenarrowspacehavebeenacceptedbymanyresearchers.Theknowledgecanbecon-cludedasthatthenucleateboilingheattransferisenhancedatlowheatfluxregionanddeterioratedathighheatfiuxregi0nespeciallyatCHF.Theenhanceme…     

Surface activity of aqueous solutions of cellulose acetate with low degree of substitution

Surface activity of aqueous solutions of cellulose acetate (CA) with total degree of substitution (〈F〉) ranging from 0.58 to 0.80 was examined. Critical micelle concentration (CMC) of the aqueous CA solutions, determined from the polymer concentration dependence of surface tension (γ), is unequivocally determined by 〈F〉, and an increase in 〈F〉 of CA brings about a lowering of the CMC. From light scattering measurements on aqueous solutions of CA with 〈F〉 = 0.8 at 20°C, it was revealed that in the vicinity of the CMC the micelles in the solution consist of c. four CA molecules, which is very close to the value obtained by analysing the data obtained from the mass action model. The surface tension of aqueous solutions of CA (〈F〉 = 0.8) in the polymer concentration range above the CMC was c. 0.74 times that of pure water over the temperature range 0–80°C.     

Input power factor control of three‐phase to three‐phase matrix converters

This paper presents input power factor control of three‐phase to three‐phase matrix converters. The authors propose three kinds of switching patterns for the matrix converters that can realize an arbitrary input‐power‐factor angle between 0 and 2π and reduce the number of commutations in all three phases to four during the control period. Also, the control range of the output voltage reference in the proposed control scheme is derived. The improvement of the input power factor by using the proposed control algorithm has been verified by experiments. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 178(3): 42–52, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21199     

Study on chemical structures of poly (tetrafluoroethylene-co-perfluoroalkylvinylether) by soft-EB irradiation in solid and molten state

Poly (tetrafluoroethylene-co-perfluoroalkylvinylether) (PFA) was irradiated by soft electron beam (soft-EB) under nitrogen gas atmosphere in solid-state and its molten state, respectively. The changes of thermal property and chemical structures of irradiated PFA in solid-state and molten state were studied by differential scanning calorimetric analysis (DSC) and solid-state ¹⁹F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. By DSC analysis, the melting temperature shifted to lower temperatures, and crystallinity decreased with increasing soft-EB dose. By solid-state ¹⁹F MAS NMR spectroscopy, the new signals was observed and the detected new signals in irradiated PFA at 315 °C and at 30 °C were due to the tertiary carbon group with branching site (Y-type crosslinking site), perfluoro-propylene site and chain end methylene groups, respectively.Moreover, the molar ratio of perfluoroalkylvinylether (FAVE) structure to -CF₂- units decreased with increasing dose.     

Present status of beryllides for fusion and industrial applications in Japan

Beryllides have remarkable characteristics besides their low density, such as high radiation resistance, high chemical stability, low hydrogen isotope retention and good high temperature mechanical strength especially for fusion applications. In order to have a practical usage for industrial applications, it is important to compile a set of quantitative data on such properties. It is also important to develop fabrication and processing paths to assure the processing of inherently brittle beryllides.The characterization and manufacturing technologies development have been carried out mainly on the Be₁₂Ti interemetallic compounds at the Be-rich side of the Be-Ti binary system. In the present paper, up-dated results on several properties are described for the compound fabricated by hot isostatic pressing (HIP) and ingot metallurgy. Mechanical properties of the compounds having a duplex microstructure with neighboring phases are evaluated by compressive tests from room temperature to 1273 K. Radiation damage of the compound is preliminary studied by charged particle irradiation. Oxidation in air and the interaction with water vapor are evaluated. Thermal desorption of the deuterium is examined by using transmission electron microscopy (TEM) and thermal desorption spectrometry (TDS). Through these evaluations it seems that Be₁₂Ti is superior as neutron multiplier with respect to pure Be metal.     

Production of nonproteinaceous amino acids using recombinant Escherichia coli cells expressing cysteine synthase and related enzymes with or without the secretion of O-acetyl-L-serine

Beta-(pyrazol-1-yl)-L-alanine (beta-PA), a model nonproteinaceous amino acid, was specifically synthesized by two methods using recombinant Escherichia coli cells that express cysteine synthase, comprising serine acetyltransferase (SAT) and O-acetylserine sulfhydrylase-A (OASS-A) and related enzymes from E. coli. In the first method (method A), recombinant cells that express wild-type SAT, OASS-A, acetate kinase (AK), and phosphotransacetylase (PTA) showed the highest beta-PA production. beta-PA was produced at 140 mM from 200 mM L-serine and 200 mM pyrazole under optimum conditions. Using the cells expressing SATDeltaC20 (truncated SAT), OASS-A, AK, and PTA, beta-PA was produced at a level of only 80 mM, whereas O-acetyl-serine (OAS) was found to be secreted into the broth. Under optimum conditions, OAS accumulated at levels of around 105 mM from 300 mM L-serine. Thus, in the second method (method B), the secreted OAS was used as the substrate for the syntheses of beta-PA and beta-(triazol-1-yl)-L-alanine (beta-TA). The OAS that accumulated in the broth was efficiently converted to beta-PA and beta-TA at levels of around 90 mM from 105 mM OAS using free OASS-A. In both methods A and B, the addition of glucose was essential for the efficient production of beta-PA and OAS, respectively.