Power Supply Noise Aware Task Scheduling on Homogeneous 3D MPSoCs Considering the Thermal Constraint

Thanks to the emerging 3D integration technology, The multiprocessor system on chips (MPSoCs) can now integrate more IP cores on chip with improved energy efficiency. However, several severe challenges also rise up for 3D ICs due to the die-stacking architecture. Among them, power supply noise becomes a big concern. In the paper, we investigate power supply noise (PSN) interactions among different cores and tiers and show that PSN variations largely depend on task assignments. On the other hand, high integration density incurs a severe thermal issue on 3D ICs. In the paper, we propose a novel task scheduling framework considering both the PSN and the thermal issue. It mainly consists of three parts. First, we extract current stimuli of running tasks by analyzing their power traces derived from architecture level simulations. Second, we develop an efficient power delivery network (PDN) solver to evaluate PSN magnitudes efficiently. Third, we propose a heuristic algorithm to solve the formulated task scheduling problem. Compared with the state-of-the-art task assignment algorithm, the proposed method can reduce PSN by 12% on a 2 × 2 × 2 3D MPSoCs and by 14% on a 3 × 3 × 3 3D MPSoCs. The end-to-end task execution time also improves as much as 5.5% and 7.8% respectively due to the suppressed PSN.     

Vicious cycle during chemical degradation of sulfonated aromatic proton exchange membranes in the fuel cell application

Weak phase separation and vulnerable linking groups between aromatic units are common setbacks of sulfonated aromatic proton exchange membranes (PEMs) from durability point of view. In this study, sulfonated poly(ether ether ketone) (SPEEK) membranes were exposed to Fenton's solution for a specific time, ranging from 10 to 60 minutes. Chemical structure and morphology evolution, decay in mechanical and thermal stability, and H₂ permeability of SPEEK membranes were evaluated during the chemical degradation. Less-entangled polymeric chains with lower average molecular weight of degraded SPEEK samples diminished mechanical rigidity. In addition, reduction of aromatic rings in each repeat unit led to higher thermal decomposition rate. Furthermore, randomly distributed micro-defects in the SPEEK morphology and an increase in water sorption can reduce the fatigue strength of membranes in the wet-dry cycles. Eventually, hydrogen cross-over rate was gradually increased, and henceforth, accelerated destructive radical formation and degradation can be predicted.     

Ceramics based on calcium phosphates substituted with magnesium ions for bone regeneration

In this study, chemical precipitation methods were used to obtain ceramic materials doped with magnesium ions in order to improve the regeneration properties of materials used for tissue engineering. Two different ratios of magnesium oxide were used to dope the ceramic powder, more precisely 5% and 10%. The synthesized materials were characterized to determine the calcination temperature of the precursor powder by means of thermal analysis; to determine the mineralogical composition, X-ray diffraction was employed and the scanning electron microscopy was used to determine the microstructure. To make use of these ceramics as biomaterials, viability and proliferation cell tests have been performed. Since synthetic materials have several limitations with regard to medical applications, the materials based on HAp substituted with Mg ions are a promising solution for the regeneration of bone defects because they have a similar bone structure. The presence of Mg in the material proves to be beneficial because this element plays an important role in bone cell regeneration, and more specifically, in stimulating osteoblast proliferation. The materials synthesized in this work present a suitable morphology for uses in bone regeneration because they offer to cells a friendly environment for growth and anchoring.     

GutSelf: Interindividual Variability in the Processing of Dietary Compounds by the Human Gastrointestinal Tract

Nutritional research is currently entering the field of personalized nutrition, to a large extent driven by major technological breakthroughs in analytical sciences and biocomputing. An efficient launching of the personalized approach depends on the ability of researchers to comprehensively monitor and characterize interindividual variability in the activity of the human gastrointestinal tract. This information is currently not available in such a form. This review therefore aims at identifying and discussing published data, providing evidence on interindividual variability in the processing of the major nutrients, i.e., protein, fat, carbohydrates, vitamins, and minerals, along the gastrointestinal tract, including oral processing, intestinal digestion, and absorption. Although interindividual variability is not a primary endpoint of most studies identified, a significant number of publications provides a wealth of information on this topic for each category of nutrients. This knowledge remains fragmented, however, and understanding the clinical relevance of most of the interindividual responses to food ingestion described in this review remains unclear. In that regard, this review has identified a gap and sets the base for future research addressing the issue of the interindividual variability in the response of the human organism to the ingestion of foods.     

In Situ Management of Ions Migration to Control Hysteresis Effect for Planar Heterojunction Perovskite Solar Cells

As one of the most promising photovoltaic materials, the efficiency of inorganic–organic hybrid halide perovskite solar cells (PSCs) has reached 25.5% in 2020. However, the stability and hysteresis remain primary challenges before it can become a commercial photovoltaic technology. Therefore, those issues have drawn significant attention for photovoltaic applications. In this work, a study of the PSCs hysteresis improvement is presented based on a combination of first-principles simulations, scanning electron microscopy images, and time-dependent photocurrent measurements. It indicates the hysteresis led by the ion migration and accumulation is mainly localized at the two interfaces: one is between electron transport layer and active layer, and the other is between active layer and hole transport layer. Considering the massive defects at the grain boundaries (GBs), they lower the potential barriers significantly. The defect density at GBs is therefore reduced via the in situ passivation of PbI₂ crystals. The hysteresis index is decreased from 22.43% down to 1.04%, and results in an improvement in efficiency from 17.12% up to 20.10%. Following the understanding of defect-induced hysteresis, an approach to improve the hysteresis is provided, which can be integrated into the fabrication process and widely applied to enhance the performance of PSCs.     

热轧低密度钢Fe-1.80Mn-1.05Al-0.09C的高温热塑性

采用Gleeble 3500热模拟试验机对一种低合金系热轧低密度钢进行了高温(760～1200℃)热塑性研究,并结合光学显微镜、体视显微镜以及扫描电镜对拉断后的断口附近组织和断口形貌进行了表征。结果表明,随着拉伸温度升高,断口面积逐渐缩小,韧窝也逐渐变大变深,断面收缩率总体表现良好,均达到80%以上,表现出了良好的高温热塑性。但是试验钢在900～1000℃进行拉伸时,出现了多处颈缩现象,900～1000℃时存在理论塑性低谷区,应避免在900～1000℃进行铸坯矫直或轧制。     

Metalloendopeptidase ADAM-like Decysin 1 (ADAMDEC1) in Colonic Subepithelial PDGFRα+ Cells Is a New Marker for Inflammatory Bowel Disease

Metalloendopeptidase ADAM-Like Decysin 1 (ADAMDEC1) is an anti-inflammatory peptidase that is almost exclusively expressed in the gastrointestinal (GI) tract. We have recently found abundant and selective expression of Adamdec1 in colonic mucosal PDGFRα⁺ cells. However, the cellular origin for this gene expression is controversial as it is also known to be expressed in intestinal macrophages. We found that Adamdec1 mRNAs were selectively expressed in colonic mucosal subepithelial PDGFRα⁺ cells. ADAMDEC1 protein was mainly released from PDGFRα⁺ cells and accumulated in the mucosal layer lamina propria space near the epithelial basement membrane. PDGFRα⁺ cells significantly overexpressed Adamdec1 mRNAs and protein in DSS-induced colitis mice. Adamdec1 was predominantly expressed in CD45⁻ PDGFRα⁺ cells in DSS-induced colitis mice, with only minimal expression in CD45⁺ CD64⁺ macrophages. Additionally, overexpression of both ADAMDEC1 mRNA and protein was consistently observed in PDGFRα⁺ cells, but not in CD64⁺ macrophages found in human colonic mucosal tissue affected by Crohn’s disease. In summary, PDGFRα⁺ cells selectively express ADAMDEC1, which is localized to the colon mucosa layer. ADAMDEC1 expression significantly increases in DSS-induced colitis affected mice and Crohn’s disease affected human tissue, suggesting that this gene can serve as a diagnostic and/or therapeutic target for intestinal inflammation and Crohn’s disease.     

Photocurable shape-memory polyether-polythioether/graphene nanocomposites and the study of their thermal conductivity

Herein a method is described to prepare photocurable thermally-conductive shape memory epoxy/ graphene composites. By photopolymerizing the epoxy resin diglycidyl ether of bisphenol A with an allyl-functionalized ditertiary amine as the curing agent, jointly with a multifunctional thiol, a crosslinked polyether-polythioether co-network was obtained. The presence of a soft domain like the flexible polythioethers enable the co-network to display shape memory properties. By varying the polyether to polythioether ratio it was possible to modulate the shape memory characteristics of the composite. The effect of the concentration of graphene nanoplatelets (GNP) in the composite was also investigated. Shape memory performances revealed excellent values of shape recovery and shape fixity with maximums of 98 and 99% respectively. The temporary- shaped composites with higher concentration of polythioethers and GNP regained their permanent shapes in 2–3 s when heated above the programming temperature. The thermal conductivity in the composites reached 0.39 W/m°K for the composite with 15% w/w of GNP. The presence of the polythioethers in the co-network enhanced the toughness of the composite as revealed by the impact resistance analysis.