磨损自补偿添加剂在成品油中的摩擦学效应

利用四球试验机考察了二聚酸－3－氯－2－羟基丙单酯（DAE）在4种成品油中的摩擦学性能。试验结果表明，DAE添加剂在L－HM68液压油和L－DAB100空压机油中具有良好的适应性，使其承载能力增强，摩擦系数降低及耐磨性增强；DAE在L－CKE涡轮蜗杆油中使耐磨性增强；DAE在L－CKC150齿轮油中虽使承载能力提高，减磨性增强，但有使耐磨性减小的趋势，说明DAE在不同的油中有不同的性能。     

Extraction of Anthocyanin Pigments from Purple Sunflower Hulls

The anthocyanin pigments in hulls of purple sunflower seeds were extracted using three solvent systems, 50:1:49 ethanol-acetic acid-water (EAW), 0.01M acetic acid (AAc), or water containing SO₂. Solvent, extraction time, size of ground hulls, pH of extracting solvent, hulls/solvent ratio, and concentration of SO₂ in water, were investigated. All were significant factors affecting yield of extracted anthocyanins. EAW and SO₂ were more effective extractants than AAc. Optimum conditions from response surface optimization for the extraction with sulphurous water were: SO₂ at 200 mg/L, hull size 20 mesh, extraction time 5 min at 22°C, and solvent/hulls ratio = 20.     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

OFA-II型定量荧光仪在油气勘探中的应用

定量荧光仪在现场应用中受到各种因素的影响:如岩屑样品浸泡时的干、湿;图谱是否出现了淬灭;环境温度的影响等等。文章通过具体事例给出解决这些问题的办法。     

从复印机纸盒结构看人性化设计

静电复印机是常用的办公设备,复印时要将不同规格的复印纸装入纸盒,经常需要操作者对纸盒进行调整。从使用者的角度讲,要用最小的力气、最简便的方法来完成对机器的操纵。这就需要考虑进行人性化设计。纸盒调整主要有自动监测纸盒尺寸的功能和纸盒内侧挡板(导纸板)的调整。对比不同品牌和不同机型复印机的纸盒设计,可看出人性化设计对方便操作者使用的重要性,也为购买机器时提供了借鉴。     

中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

弹药包装冲击强度试验方法的改进研究

介绍一种新的弹药包装冲击强度试验方法，应用该试验方法可以防止冲击强度试验时出现与期望值相反的现象。     

川东石炭系气藏排水采气工艺技术及其应用

四川盆地东部石炭系气藏是中国石油西南油气田公司的主力气藏之一，经过20多年的开发，出水气井增多、开发难度加大，必须进行排水采气才能维持正常生产。由于石炭系气藏大部分生产井存在井深、地层压力系数低、温度高、静液面深、复产后井口套压高的特点，常规排水采气工艺不能满足气藏的要求。针对这些难点，研究出深井高压气举、低压深井的优选管柱、深井高温泡排三项适合石炭系气藏的排水采气工艺，并在现场十多口井上进行了试验，增产效果显著。     

化工离心泵的可靠性分析

对石油化工设备安全性和维修技术的研究,需要设备运行故障率等可靠性数据。探讨了如何应用传统可靠性理论知识,并结合国内外相关标准规范和运行数据的统计分析来确定离心泵的可靠性数据的方法。     

防洪设计中入流的探讨

本文对防洪设计中入流的描述方法进行了探讨,结合实例对几种方法的应用成果进行了比较,分析论证了各种方法的优缺点.