Effect of chitosan-gluconic acid conjugate/poly(vinyl alcohol) cryogels as wound dressing on partial-thickness wounds in diabetic rats

We previously developed chitosan cryogels from chitosan-gluconic acid conjugate without using toxic additives for wound care. In this study, we improved physiological characteristics of the previous cryogels by incorporating poly(vinyl alcohol) that also form cryogels. Mechanical strength of the cryogels was more than two times higher than that of the previous cryogels. Furthermore, the incorporation of poly(vinyl alcohol) enhanced water retention and resistance to degradation of the gels by lysozyme. The cryogels retained the favorable biological properties of the previous cryogels that they accelerate infiltration of inflammatory cells into wound sites. Time period for repairing 50 % of initial area of partial-thickness skin wound treated with the cryogels (4.0 ± 1.1 days) was shorter than those with gauze (6.5 ± 0.3 days) or a commercial hydrogel dressing (5.7 ± 0.3 days). Finally, we confirmed that incorporation of basic fibroblast growth factor into the cryogels was effective to further accelerate wound healing (2.7 ± 1.0 days). These results demonstrate that the cryogels in this study are promising for wound care.     

Three-Dimensional Nonlinear Dynamic Analysis of Complex High-Rise Building Structures

Abstract: Recently, designs of high-rise buildings have become more complex. Various types of buildings result, such as buildings with a semicircular plan, and buildings in which the upper floors are larger than the lower floors.
The authors have developed a three-dimensional (3-D) dynamic analysis system, 'Super DYNAMICS', which considers the nonlinear behavior of each structural member in order to analyze the structural behavior of such complex steel buildings under severe earthquakes.
This system is mainly operated on a supercomputer because of the large number of calculations required for the member level dynamic analysis.
This paper first describes the general concepts of the system and the 3-D dynamic response analysis methods, based on the nonlinear behavior of each member under axial force and biaxial bending moments, and then examines and demonstrates the precision of the yield surface of steel members created by multispring models, and the ability of the system to trace the behavior of members and frames after yielding. It shows, in addition, actual examples of a static and a dynamic analysis by three-direction ground motion applied to a 19-story steel-framed office building.     

Evaluation of 4-nonylphenols and 4-tert-octylphenol contamination of fish in rivers by laboratory accumulation and excretion experiments

Laboratory accumulation and excretion experiments of 4-nonylphenols (NP) and 4-tert-octylphenol (OP) were performed for killifish (Oryzias latipes). The bioconcentration factors (BCF, wet weight) in the whole fish were mean +/- SD of 167 +/- 23 (n = 4) for NP and 261 +/- 62 (n = 4) for OP. The biological half-lives in the whole fish were 9.9 h for NP and 7.7 h for OP. Parallel to the laboratory experiments, field survey on the chemicals contamination for water and ayu fish (Plecoglossus altivelis) from rivers flowing into Lake Biwa was performed. The contamination was not so high in agreement with the laboratory experimental data and the field BCF values (wet weight) in the ayu fish were 21 +/- 15 (n = 8) for NP and 297 +/- 194 (n = 3) for OP.     

Japanese research and development on metallic biomedical,dental, and healthcare materials

There is considerable demand for metallic materials for use in medical and dental devices. Metals and alloys are widely used as biomedical materials and are indispensable in the medical field. In dentistry, metal is used for restorations, orthodontic wires, and dental implants. This article describes R&D on metallic biomaterials primarily conducted by the members of the Japan Institute of Metals. For more information, contact Mitsuo Niinomi, Toyohashi University of Technology, Department of Production Systems Engineering, 1-1 Hibarigaoka, Tempaku-cho.Toyohashi 441-8580, Japan     

Generation of adaptive gait patterns for quadruped robot with CPG network including motor dynamic model

This paper describes the generation of adaptive gait patterns using new Central Pattern Generators (CPGs) including motor dynamic models for a quadruped robot under various environments. The CPGs act as the flexible oscillators of the joints and adjust joint angles to required values. The CPGs are interconnected with each other and sets of their coupling parameters are adjusted by a genetic algorithm so that the quadruped robot can realize stable and adequate gait patterns. Generation of gait patterns results in the formation of the CPG networks suitable for the formation of not only a straight walking pattern but also of rotating gait patterns. Experimental results demonstrate that the proposed CPG networks are effective for the automatic adjustment of the adaptive gait patterns for the tested quadruped robot under various environments. Furthermore, the target tracking control based on image processing is achieved by combining the general gait patterns. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(1): 35–43, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20225     

Electrolytic removal of ammonia from brine wastewater: scale‐up,operation and pilot‐scale evaluation

Brine wastewater with a high ammonia content from an iodine processing plant (commonly called kansui in Japan) was treated by electrolysis. The system, which can be considered as an indirect electrolytic treatment process, generates chlorine at the anodes and initiates the formation of mixed oxidants like hypochlorous acid. The oxidants then act as agents for ammonia destruction. Laboratory‐scale experiments showed that high ammonia concentrations (as much as 200 mg dm^?3) could be completely removed within a few minutes, and could be considered a good alternative for efficient ammonia removal from saline wastewaters. From laboratory‐scale experiments in the batch and continuous modes, the charge dose was analyzed and used as the operating and scale‐up factor. The value of the charge dose was not severely affected by changes in operating conditions such as electrode spacing and temperature. The charge dose from batch and continuous runs was found to be in the range of 23 C (mg NH₄‐N removed)^?1 to 29 C (mg NH₄‐N removed)^?1. Using the charge dose obtained from laboratory‐scale continuous electrolysis experiments as the scale‐up factor, a pilot‐scale reactor was designed, and the operating conditions were calculated. In the pilot‐scale reactor tests at different flow rates, the effluent ammonia concentrations were reasonably close to the calculated values predicted from the charge dose equation. Copyright © 2004 Society of Chemical Industry     

High drive current NMOS with Si-SiGe heterostructure low electric field channel

A drive-current enhancement in NMOS with a compressively strained SiGe structure, which had been a difficult challenge for CMOS integration with strained SiGe high-hole-mobility PMOS, was successfully achieved using a Si-SiGe heterostructure low electric field channel of optimum thickness. A 4-nm-thick Si low-field-channel NMOS with a 4-nm-thick Si/sub 0.8/Ge/sub 0.2/ layer improved drive current by 10% with a 20% reduction in gate leakage current compared with Si-control, while suppressing threshold-voltage rolloff characteristic degradation, and demonstrated excellent I/sub on/--I/sub off/ characteristics of I/sub on/ = 1 mA//spl mu/m for I/sub off/ = 100 nA//spl mu/m. These results are the best in ever reported NMOS with a compressively strained SiGe structure and indicate that a Si-SiGe heterostructure low-field-channel NMOS integrated with a compressively strained SiGe channel PMOS is a promising candidate for high-speed CMOS in 65-nm node logic technology.     

Direct observation of PFPE lubricant molecules by cryogenic AFM under ultra-high vacuum

Surface lubrication is one of the essential technologies in modern magnetic disk systems and improvement of the surface lubrication is very important in the development of next generation systems. In this study, we used AFM for the direct observation of perfluoropolyether (PFPE) lubricant molecules on atomically flat surfaces. We used a cryogenic non-contact AFM to observe the molecules in a frozen state of micro-Brownian motion of PFPE segments, because the glass transition temperature of PFPE is very low. To avoid freezing a trace amount of water vapor on the sample surface at liquid nitrogen temperatures, the AFM observation was performed under ultra-high vacuum. We observed that on a gold surface the size of the molecules increases with repeated AFM scans. This is because the mechanical stimulus causes the fusion of PFPE lubricant molecules to form reversed micelles at the non-polar surface. At a hydrophilic silicon wafer surface, however, we succeeded in observing single lubricant molecules. This is because almost all PFPE lubricant molecules are fixed to the hydrophilic solid surface by polar–polar bond formation and they cannot move around on the surface and thus they cannot fuse to each other. As formation of the reversed micelle structure is a rather general phenomenon in the PFPE lubricant thin layer at non-polar surfaces, we also will discuss briefly the expected molecular structures of PFPE lubricants at the surface of the carbon overcoat of magnetic disks.     

Persistent chorea following cardiac surgery for congenital heart disease

We describe a 6 year old girl with chorea following cardiac surgery, the first such report in Japan. The radical operation for total anomalous pulmonary venous return was carried out at the age of 11 months under hypothermia. Seven days after the operation, a sudden onset of irritability, dysphagia, chorea, generalized, hypotonia, and complete external ophthalmoplegia were seen. These symptoms diminished gradually, but chorea remained. We speculated that the cause of chorea arose from the cardiac surgery under hypothermia. It is necessary to consider 'cardiac surgery' as one of the triggers of certain movement disorders including chorea. We tried treatment with haloperidol, pimozide, and several other drugs; only pimozide was effective in decreasing chorea without any side-effects.     

N-channel MOSFETs fabricated on homoepitaxy-grown 3C-SiC films

We present results of the enhancement mode, n-channel 3C-silicon carbide (SiC) MOSFETs fabricated on homoepitaxy 3C-SiC films. The fabricated devices exhibit excellent gate-controlled linear and saturation regimes of operation. The average effective channel mobility is found to be 229 cm/sup 2//Vs. The breakdown field of the gate oxide is observed at be 11 MV/cm and the subthreshold swing is determined to be 280 mV/decade.