砂浆立方体抗压强度与底模的关系

建筑砂浆试件的制作目前均执行《建筑砂浆基本性能试验方法》(JGJ70-1990)有关规定，所用底模系含水量不大于2％的普通粘土砖。     

用自射线照相技术研究放射性核素在岩石和矿物上的吸附

应用自射线照相和岩相照相技术联合图象法研究了锕系元素和长寿命裂变产物在岩石和矿物上的吸附行为，直接观察到不同矿物和化学成份对核素的吸附。应用这个方法，研究了＾２３９Ｐｕ、＾２４１Ａｍ在花岗岩上的吸附，＾９０Ｔｃ在辉锑矿、锑赭石和脆硫锑铅矿上的吸附以及＾１２５Ｉ在灰硒汞矿上的吸附，得到了一些有价值的结果。     

岩石样品中铷的中子活化分析

研究了苦味酸溶液的ｐＨ变化对用１８－Ｃ－６（１８Ｃ６）的硝基苯溶液定量萃取Ｒｂ的影响及１８Ｃ６浓度变化对定量萃取Ｒｂ的影响，确定了定量反萃Ｒｂ的实验条件。作出了磷酸锆无机离子交换柱上的Ｒｂ－Ｃｓ分离曲线。测定了岩石样品的微量Ｒｂ和痕量＾８４Ｒｂ。     

基于FusionWidgets Gauges开发高职院校人才培养工作状态数据仪表盘

提出使用FusionWidgets Gauges仪表盘套件展示高职院校人才培养工作状态数据量化指标的仪表盘方法,给出了实现原理,文末给出实现实例。     

Preparation and properties of close-packed composite materials

Monodisperse silica particles of about 0.3m diameter are suspended in methacrylate monomer using a carefully selected dispersant. Many steric dispersants are hydrocarbon chains with a reactive end-group. These are not effective as dispersants for silica in moderately polar solvents, such as esters and the methacrylate monomers. Good dispersion was obtained with a methacrylate polymer terminated by a chlorosilane end group. Settling or centrifugation of these unagglomerated dispersions gives well-packed particle beds. Polymerization of the surrounding monomer produces composite materials with high packing fractions and a high degree of regularity. Moduli and strengths of these composites are reported.     

混合溶剂对Ru(Ⅳ)萃取的研究

一、前言 在一定浓度盐酸介质中,Ru(Ⅳ)以RuCl_6~(2-)络阴离子状态存在,可被C类溶剂TOA(三辛胺)以离子缔合机制定量地萃入有机相。由实验得到在相同条件下,TOA对Ru(Ⅳ)的萃取率随稀释剂介电常数的增加而下降。     

Site occupations and ordering behaviour of O phase in Ti2AlNb—based intermetallics

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｏｒｔｈｏｒｈｏｍｂｉｃａｌｌｏｙｓａｒｅｏｆｇｒｅａｔｔｅｃｈ ｎｏｌｏｇ ｉｃａｌｉｎｔｅｒｅｓｔｉｎｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎｓｓｉｎｃｅｔｈｅｙｈａｖｅａｇｏｏｄｂａｌａｎｃｅａｍｏｎｇｓｔ     

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

电动车制动能量再生反馈控制研究

研究了电动汽车制动过程中的能量回馈，设计了混合励磁无刷电动机在汽车制动过程的能量再生反馈控制系统。以脉宽调制调压调速系统为例，研究各种制动态下的能量回馈过程。并将其安装在EV6600电动汽车上进行试验，结果表明：该控制系统可达到10%左右的能量回收效率。