The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

The effect of oxygen and additional oxygen providers on furfuryl alcohol polymerization was investigated through chemical analyses and mechanical evaluation. NMR, UV–vis, Fourier transform infrared, and gas chromatography–mass spectrometry (GC–MS) results suggested that atmospheric oxygen and the further addition of an oxygen source functioned as an activator for the entire network polymerization. Interestingly, the construction of a conjugated structure on the furan linear chain, which is key to three-dimensional cross-linking, also appears to be accelerated in the presence of oxygen. Furthermore, the introduction of oxygen providers into the curing system successfully enhanced the mechanical properties of the cured furan resin.     

Use of a Metal-mould Process in the Development of Hemispherical Heavy-walled Castings

The exacting quality required of hemispherical heavy-walled steel castings, used in nuclear power applications, has been remarkably improved by the adoption of a newly developed metal-mould process. This technique is dependent on the use of a metal core. The optimum conditions for solidification were determined by the finite element analytical method. The appropriate wall-thickness of the chill elements was also investigated using data based on actual experience. The core was designed in such a manner that the surface carried a series of concave “dimples” in the manner of a golf-ball, the pattern being intended to prevent the formation of cracks, generated on the casting surface when in contact with a metal mould. Stresses caused by solidification shrinkage were reduced by splitting the core. In the event, the casting structure conformed well to the results of the solidification analysis. Radiographic examination revealed a high level of soundness, with no trace of internal defects. No anisotropy was detected in mechanical properties. It is shown that this process is being currently employed in the manufacture of actual products.     

Epithelial Cell Transformation and Senescence as Indicators of Genome Aging: Current Advances and Unanswered Questions

The recent advances in deciphering the human genome allow us to understand and evaluate the mechanisms of human genome age-associated transformations, which are largely unclear. Genome sequencing techniques assure comprehensive mapping of human genetics; however, understanding of gene functional interactions, specifically of time/age-dependent modifications, remain challenging. The age of the genome is defined by the sum of individual (inherited) and acquired genomic traits, based on internal and external factors that impact ontogenesis from the moment of egg fertilization and embryonic development. The biological part of genomic age opens a new perspective for intervention. The discovery of single cell-based mechanisms for genetic change indicates the possibility of influencing aging and associated disease burden, as well as metabolism. Cell populations with transformed genetic background were shown to serve as the origin of common diseases during extended life expectancy (superaging). Consequently, age-related cell transformation leads to cancer and cell degeneration (senescence). This article aims to describe current advances in the genomic mechanisms of senescence and its role in the spatiotemporal spread of epithelial clones and cell evolution.     

Volatile Stimuli Related to Feeding Activity of Nonprey Caterpillars, Spodoptera exigua, Affect Olfactory Response of the Predatory Mite Phytoseiulus persimilis

The effect of volatiles related to feeding activity of nonprey caterpillars, Spodoptera exigua, on the olfactory response of the predatory mites Phytoseiulus persimilis was examined in a Y-tube olfactometer. At a low caterpillar density (20 caterpillars on 10 Lima bean leaves), the predators were significantly more attracted to volatiles from infested leaves on which the caterpillars and their products were present or from infested leaves from which the caterpillars and their products had been removed when compared to volatiles from uninfested leaves. The predators, however, significantly avoided odors from 20 caterpillars and their products (mainly feces) removed from bean leaves. In contrast, at a higher caterpillar density (100 caterpillars on 10 Lima bean leaves), the predators avoided volatiles from caterpillar-infested bean leaves. Volatiles from infested leaves from which the caterpillars and their products had been removed were not preferred over volatiles from uninfested leaves. Volatiles from feces collected from 100 caterpillars were strongly avoided by the predators, while the behavior of the predatory mites was not affected by volatiles from 100 caterpillars removed from a plant. The data show that carnivorous arthropods may avoid nonprofitable herbivores. This avoidance seems to result from an interference of volatiles from herbivore products with the attraction to herbivore-induced plant volatiles.     

Corrosion resistance of structural materials in high-temperature aqueous sulfuric acids in thermochemical water-splitting iodine–sulfur process

Very harsh environments exist in the iodine–sulfur process for hydrogen production. Structural materials for sulfuric acid vaporizers and concentrators are exposed to high-temperature corrosive environments. Immersion tests were carried out to evaluate the corrosion resistance of ceramics and to evaluate corrosion-resistant metals exposed to environments of aqueous sulfuric acids at temperatures of 320, 380, and 460 °C, and pressure of 2 MPa. The aqueous sulfuric acid concentrations for the temperatures were 75, 85, and 95 wt%, respectively. Ceramic specimens of silicon carbides (SiC), silicon-impregnated silicon carbides (Si–SiC), and silicon nitrides (Si₃N₄) showed excellent corrosion resistance from weight loss measurements after exposure to 75, 85, and 95 wt% sulfuric acid. High-silicon irons with silicon content of 20 wt% showed a fair measure of corrosion resistance. However, evidence of crack formation was detected via microscopy. Silicon enriched steels severely suffered from uniform corrosion with a corrosion rate in 95 wt% sulfuric acid of approximately 1 g m⁻² h⁻¹. Among the tested materials, the ceramics SiC, Si–SiC, and Si₃N₄ were found to be suitable candidates for structural materials in direct contact with the considered environments.     

Thermal Feasibility Analyses for the 1356MWe High Conversion-Type Innovative Water Reactor for Flexible Fuel Cycle

A new reactor concept of innovative water reactor for flexible fuel cycle (FLWR) is under development at Japan Atomic Energy Agency in cooperation with Japanese reactor suppliers. A design of 1,356 MWe high conversion boiling water reactor-type FLWR core, which has an instantaneous conversion ratio of 1.04, negative void coefficient, high burnup of 65 GWd/t, and 15-month operational cycle length, has been constructed. So far, studies on thermal-hydraulic characteristics have been performed for tight lattice core. Evaluation methods for the critical power and the pressure drop under both the steady and the transient states have been established, and a modified TRAC-BF1 code has been developed for the thermal-hydraulic design of the FLWR. In this paper, the thermal feasibility of the designed 1356MWe FLWR core is analyzed by using the modified TRAC-BF1 code. The analysis is first carried out for the current core design. It is confirmed that no boiling transition (BT) occurs under the steady state. However, the minimum critical power ratio (MCPR) is only about 1.08, and the BT is confirmed occurring under the postulated abnormal transient processes. Therefore, concretizations of the conditions that ensure the thermal feasibility of a natural circulation-type FLWR and a forced circulation-type FLWR are performed. As for the results, for a forced circulation-type FLWR, the operation-limited MCPR (OLMCPR) is 1.32, and the necessary minimum core coolant flow rate is 640 kg/(m²s). For a natural circulation-type FLWR, the OLMCPR is 1.19, and the necessary minimum core coolant flow rate is 560 kg/(m²s).     

Effects of physical-chemical characteristics on the sorption of selected endocrine disruptors by dissolved organic matter surrogates

Sorption coefficients (K(oc) values) of selected endocrine disruptors for a wide variety of dissolved organic matter (DOM) were measured using fluorescence quenching and solubility enhancement. 17beta-Estradiol, estriol, 17alpha-ethynylestradiol, p-nonylphenol, p-tert-octylphenol, and dibutylphthalate were selected as endocrine disruptors. Aldrich humic acid, Suwannee River humic and fulvic acids, Nordic fulvic acid, alginic acid, dextran, and tannic acid were selected as DOM surrogates. The resulting sorption coefficients (log K(oc)) were independent of octanol-water partitioning coefficients (log K(ow)) of the selected endocrine disruptors, indicating the hydrophobic interaction is not the predominant sorption mechanism. Moreover, the K(oc) values for the selected endocrine disruptors, especially the steroid estrogens, correlated much better with UV absorptivity at 272 nm (A272) and phenolic group concentration of the DOM than with either the H/O or the (O+N)/C atomic ratio of the DOM. This suggests that the sorption mechanism is closely related to the interaction between pi-electrons and the hydrogen bonds, i.e., the affinity between phenolic groups of the steroid estrogens and DOM is suggested to provide a relatively large contribution to the overall sorption and yield the K(oc) values of the steroid estrogens as high as those of the alkylphenols and dibutylphthalate, which are suggested to be dominated by nonspecific hydrophobic interaction.     

Semi-transparent PV: Thermal performance, power generation, daylight modelling and energy saving potential in a residential application

In this research, semi-transparent PV is proposed as top light material for residential application. Using the results of field measurements, essential parameters pertaining to the power generation, thermal and optical characteristics of semi-transparent PV panels are understood. Calculation models presenting the above characteristics are developed and validated. The validated models are incorporated into Energy Plus to carry out overall energy consumption analyses in five climate regions in Japan to assess the energy saving potential of the semi-transparent PV panels. With appropriate optimization measures, the semi-transparent PV top light with 50% radiation transmission rate contributes to a maximum of 5.3% reduction in heating and cooling energy consumption compared with a standard BiPV roof. The effect of daylighting in lighting energy saving is subtle as most of the residential lighting demand occur during night-time. In the aspect of total energy consumption, net energy savings in the range of 3.0–8.7% are achieved for the 50% radiation transmission semi-transparent PV top light case relative to the base case of BiPV roof, where reduction in heating and cooling energy demand contributes most to the total energy saving.     

Surface activity of aqueous solutions of cellulose acetate with low degree of substitution

Surface activity of aqueous solutions of cellulose acetate (CA) with total degree of substitution (〈F〉) ranging from 0.58 to 0.80 was examined. Critical micelle concentration (CMC) of the aqueous CA solutions, determined from the polymer concentration dependence of surface tension (γ), is unequivocally determined by 〈F〉, and an increase in 〈F〉 of CA brings about a lowering of the CMC. From light scattering measurements on aqueous solutions of CA with 〈F〉 = 0.8 at 20°C, it was revealed that in the vicinity of the CMC the micelles in the solution consist of c. four CA molecules, which is very close to the value obtained by analysing the data obtained from the mass action model. The surface tension of aqueous solutions of CA (〈F〉 = 0.8) in the polymer concentration range above the CMC was c. 0.74 times that of pure water over the temperature range 0–80°C.