Authority updating: An expert authority evaluation algorithm considering post‐evaluation and power indices in social networks

In group assessment, the focus is on finding high‐authority experts to improve the reliability of assessment results. In this study, we propose an authority updating algorithm while considering the power and judgement reliability of an expert on the basis of social networks and post‐evaluations. A network power index is established and used to reflect the power of an expert while considering social networks. The measurement of the judgement reliability of an expert considers the post‐evaluation of the objects selected by experts, thereby more scientifically reflecting the reliability of experts. The analysis shows the following: although the social‐network structure influences the authority of experts, the influence weakens when the assessment group is a highly or even fully connected group; the network effect may increase the authority of some experts and reduce that of others, and it will weaken as the network connectivity increases; moreover, the judgement reliability and authority of an expert while considering post‐evaluation can encourage him/her to make fair assessments and strive to reduce his/her motivation and cognitive biases.     

含多端口能量路由器的多能互补系统故障保护功能测试研究

针对某区域用电负荷存在严重的季节性过载现象,以及可再生能源存在功率波动大、稳定性较差的问题,研制了多能(含水电、光伏、储能)、多端口的能量路由器装置及其能量管理系统.综合考虑当地多场景运行,解决了季节性过载问题,实现了能量的合理配置与利用.首先,对比分析选定能量路由器各端口变换器的拓扑结构;然后,对多场景下的工作模式进行介绍;最后,对含能量路由器的多能互补系统进行故障保护功能测试.测试结果表明,该系统具有较好的故障保护功能,有效实现了不同场景下的工作模式切换,直流母线电压稳定以及上层功率指令跟踪等功能,解决了当地用电负荷季节性过载和可再生能源功率波动较大的问题.     

利用ADCP回波强度估算河流悬移质含沙量的应用研究

通过简要介绍利用声学多普勒水流剖面仪(ADCP)回波强度估算悬移质含沙量的基本原理,结合梧州水文站的应用实例,利用ADCP的回波强度数据和现场采集的水样含沙量建立相关关系,根据相关关系由回波强度反演估算的水体悬移质含沙量验证了利用ADCP的回波强度估算悬移质含沙量的可行性。应用于梧州水文站的实践表明,左河道推算的系统误差为-0.1%,右河道推算的系统误差为1.5%。这种方法具有不扰动流场、测量剖面同步性较好、数据空间分辨率较高的优点,与传统的取样过滤称量法相比,计算效率显著提高。     

凹凸棒粘土用作高水速凝注浆悬浮剂

以凹凸棒粘土作为高水速凝固化充填材料的悬浮稳定剂，考察了不同制浆机械对凹凸棒粘土制浆率的影响。采用高剪切混合乳化机预制的1％凹凸棒粘土浆配制高水速凝固化充填材料甲、已料单浆可获得满意的悬浮稳定效果。其充填体结石抗压强度早期发展迅速，后期持续增长。采用此工艺，注浆料的材料成本仅增加2％。     

Surface morphology and nodule formation mechanism of cellulose acetate membranes by atomic force microscopy

By the use of atomic force microscopy (AFM), formation mechanism of nodular structure in cellulose acetate membranes was systematically investigated. Elementary factors affecting the nodule formation were delineated on the basis of both kinetic and thermodynamic considerations. It was shown that (1) the exact nature of nodular structure is thermodynamic equilibrium glassy state; nodular structure will vanish in the rubbery state; (2) the thermodynamic factor affecting nodule formation is the membrane formation temperature; with the membrane formation temperature decreasing, more chain segments are able to form nodular structures; (3) nodule formation is dependent on the segment rearrangement; variation of the solvent environment is the major kinetic factor affecting the segment rearrangement and nodule formation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1328–1335, 2003     

Poly(3‐chlorothiophene) films prepared by the direct electrochemical oxidation of 3‐chlorothiophene in mixed electrolytes of boron trifluoride diethyl etherate and sulfuric acid

3‐Chlorothiophene (CT) was electrochemically polymerized in mixed electrolytes of a boron trifluoride diethyl etherate solution containing 0–20% (by volume) sulfuric acid. The oxidation potentials of the monomer in these media were measured to be only 1.06–1.31 V (vs Ag/AgCl). These values were much lower than that of CT in acetonitrile and 0.1 mol/L (Bu)₄NBF₄ (1.92 V vs Ag/AgCl). Poly(3‐chlorothiophene) (PCT) films with conductivities of 0.1–2 S cm^?1 were obtained. The structure, morphology, and electrochemical behavior of the PCT films also were investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 502–509, 2003     

扬巴工程中承包商合同控制

阐述扬巴项目中合同控制的基本做法,比较国内工程与涉外工程项目中合同控制的差异,提出承包商在涉外工程项目中做好合同控制工作的建议。     

A survey of traffic-based routing metrics in family of expected transmission count for self-organizing networks

Self-Organizing Networks (SONs) are attractive for applications where flexibility, resilience, and a large network service area are required. In order to meet the requirements of those applications, the principal issue is to guarantee efficient routing in SONs. Hence, the design and selection of appropriate routing metrics is important. A mass of metrics have been proposed in the past several decades. Among all the metrics, Expected Transmission Count (ETX) has drawn the most attention. Since the proposal of ETX, many ETX-based or extended metrics have been proposed. ETX and its descendants compose the ETX family. This paper is an attempt to analyze, compare and summarize traffic-based routing metrics in the ETX family. Details of each routing metric are presented and analyzed. Some of our viewpoints on the principal for designing metrics in SONs are presented.     

国产核电厂蒸汽发生器下封头接管区模拟装置承受循环载荷能力的试验

国产核电厂蒸汽发生器下封头群孔接管区具有应力分布复杂、焊接施工条件差的特点。为考核其承受循环载荷的能力，设计制造了与实物相似的模拟试验装置，根据核电厂运行寿命期内的载荷特点，确定了模拟试验装置的试验载荷与试验循环数。循环加载试验的结果表明，蒸汽发生器下封头群孔接管区承受循环载荷的能力在寿命期内是符合要求的。     

集成电路密封用高纯邻甲酚醛环氧树脂的制备

ECN树脂中的可水解氯含量是决定树脂质量的—个重要指标。本文研究了反应温度、ECH/OCN配比、反应时间和碱用量等因素的影响,取得了规律性的认识,并获得最佳配方,制备出高纯度的ECN树脂系列产品。