合成己二腈反应技术研究——(Ⅴ)己二腈工业反应过程模拟与反应器改造

对己二腈工业反应器提出了两釜串联带回流的模型,通过模拟计算得出模型的级间返混系数 f=6的结论。该模型能较好地预测工业反应器中物料组分浓度变化和气、液两相的流动特性;指出了现工业反应器的鼓泡中和段体积偏小是造成己二酸浓度偏高的关键;提出了可以通过增加串连一个鼓泡预反应段的改造方案,能有效地降低己二酸的浓度,从7%降至4%左右,从而能较好地减缓腐蚀和结焦。     

Enantioselective antiplatelet actions of nipecotamides

This investigation retrospectively examined changes in marital satisfaction following stroke. The relationship between such changes and other pertinent factors were also examined, including severity of aphasia, knowledge of aphasia, number of months after stroke, and length of the marriage. The subjects were 40 spouses of patients with aphasia grouped according to severity of the aphasia (mild, moderate, severe). Spouses completed two different measures of marital satisfaction--the Marital Satisfaction Scale (MSS) and the Marital Comparison Level Index (MCLI). These measures were completed in both a prestroke (retrospective reporting) and a poststroke format to allow for change to be assessed. In addition, a Knowledge of Aphasia questionnaire was completed by the normal spouses to evaluate their understanding of the disorder of aphasia. There was a significant difference between prestroke and poststroke scores on both the MSS and the MCLI, indicating a lower level of satisfaction following the stroke. The amount of change between prestroke and poststroke MSS and MCLI scores was not related to either number of months poststroke or number of years married. Although there was no relationship between changes in prestroke and poststroke scores on the MCLI and Knowledge of Aphasia scores, there was a significant correlation between changes in these scores on the MSS and Knowledge of Aphasia scores. Hence, the more knowledge spouses had regarding aphasia, the less the negative impact the stroke had on marital satisfaction, as measured by the MSS. Results are discussed in terms of the interdisciplinary treatment needs of aphasic patients and the implications for future investigations.     

浅谈无缝钢管的壁厚偏差

通过探讨、分析无缝钢管壁厚偏差产生的原因，提出了改善钢管壁厚偏差的一些措施，并结合实际生产，得出了比较满意的结果。     

应用于生物医学的光声光谱技术的改进和实验研究

改进的光声光谱归一化技术，避免了普通的分光法归一化光声光谱技术中分束镜以及锁相放大器动态范围的影响和限制，实现宽光谱范围内准确的光谱测量。氙灯光源功率起伏用修正项修正，误差在5％以内，实现各次实验数据的可比性。     

Kinetics of two-step anionic polymerization

This article deals with the kinetics of two-step anionic polymerization by way of a non-steady state method. Several molecular parameters can be evaluated using the formulae developed. A bimodal molecular weight distribution function for the resulting polymer is derived from the set of kinetic differential equations, which is in agreement with the experimental data reported.     

在经典极限下量子斯特林制冷机的优化

经济利润率是评价一个实际热力装置的主要指标之一。将有限时间热力学，非平衡量子统计理论和yong经济学相结合，导出了量子斯特林制冷机的最大利润率以及对应的性能界限，其结果与实际斯特林制冷机的优化设计和模型评估提供了一个最佳的预选方案。     

CA／PAN中空纤维血浆分离膜的结构与性能

本研究以CA及PAN的共混溶液,通过干-湿法纺丝制取中空纤维,利用共混高聚物各组分在凝固剂中相分离速度的差异,形成具有稳定结构的中空纤维孔膜,该膜用于分离血液中的血浆成分具有良好效果。讨论了成型条件及添加剂等对膜结构、性能的影响,用SEM及图相分析仪、MAP压汞仪及DSC等分析手段,对膜的微孔结构、形态、孔尺寸及中空纤维膜的血浆通量和水通量等进行了系统的考查。     

压型钢板组合楼板承载力的有限元分析

压型钢板组合楼板是 2 0世纪发展起来的一种新型结构形式。它具有显著的优势 ,如轻质、高强 ,施工快捷等 ,将在未来的建筑领域中大有作为。组合楼板的承载力主要取决于钢板 -混凝土界面处的抗剪强度。建立了一个二维有限元模型来研究单向组合板的性能。并将计算结果与试验数据进行对比 ,验证了模型的有效性     

辐照技术在聚丙烯材料制备和改性中的应用

利用辐照的手段,来制备功能化的聚丙烯材料,在获得新功能的同时,不改变聚丙烯原有的优点,并综述了辐照技术在聚丙烯材料制备和改性中的研究及应用情况     

高质量ZnO薄膜的退火性质研究

在LP－MOCVD中，我们利用Zn(C2H5)2作Zn源，CO2作氧源，在（0002）蓝宝石衬底上成功制备出皮c轴取向高度一致的ZnO薄膜，并对其进行500℃-800℃四个不同温度的退火。利用XRD、吸收谱、光致发光谱和AFM等手段研究了退火对ZnO晶体质量和光学性质的影响。退火后，（0002）ZnO的XRD衍射峰强度显著增强，c轴晶格常数变小，同时（0002）ZnOX射红衍射峰半高宽不断减小表明晶粒逐渐增大，这与AFM观察结果较一致。由透射谱拟合得到的光学带隙退火后变小，PL谱的带边发射则加强，并出现红移，蓝带发光被有效抑制，表明ZnO薄膜的质量得到提高。