Scanning electron microscope electron detector with a radial type discrete dynode electron multiplier

A discrete dynode electron multiplier with radial flux of electrons was built and tested in the range of low‐voltage scanning electron microscopy as a backscattered electron detector of topographic contrast. The multiplier collects backscattered electron emitted in a specific range of take‐off angles and over the whole azimuth angular range enabling large solid collection angle. Multipliers with different dynode shapes were studied theoretically with the use of the software for particle optics and three assemblies were built and tested experimentally. The gain estimation, assessment of the type of detected electrons (secondary electron or backscattered electron), imaging the spatial collection efficiency and signal‐to‐noise measurements were performed.     

沼气脱硫技术研究

本文综述了近年研究人员在开发沼气脱硫工艺方面所做的工作,包括现代与传统的脱硫技术工艺.探讨了物理、化学和生物脱硫技术对沼气脱硫工艺的影响因素.     

Nucleation of copper on an assembly of carbon microelectrodes

The initial stage of copper electrodeposition on the electrochemically activated assembly of carbon microelectrodes from an acid solution of copper sulfate was investigated using cyclic voltammetry, potentiostatic pulse technique and electrochemical impedance spectroscopy. Analysis of the experimental current transients has been carried out using a non-linear fitting procedure according to the model that takes into account spherical diffusion towards a disc-shaped microelectrode. The higher values of diffusion coefficient in comparison with those observed on planar electrodes were explained with an increased diffusion caused by the electrode geometry. Impedance spectra showed two time constants, the high-frequency related to the charge transfer process and the low-frequency corresponded to the deposit morphology.     

Using process-oriented, sequencing educational technologies: Some important pedagogical issues

In recent times, sequencing technologies are becoming increasingly used, both by the university and the industry sectors. In essence, these complex systems support sequencing of, and navigation through units of content. They come in two different types: SCORM-based and workflow-based systems. Current research efforts related to sequencing technologies concentrate mostly on technical issues, while the associated pedagogical issues remain unexplored.The main objective of this paper is to describe the most important pedagogical issues that need to be taken into account when implementing any type of sequencing educational technologies (either SCORM- or workflow-based). These issues were identified during an action-learning project related to the practical implementation of a workflow-based educational system. During the reflection phase of this project, these issues were then genarised, so they could be applied to any type of sequencing technology and in any application domain (teaching discipline). The paper describes how sequencing technology can be used to enable a more flexible learning experience (especially in terms of time and flexible learning pathways) and then proceeds with the detailed analysis of the associated pedagogical issues.     

The value of certification: an empirical assessment of the perceptions of end-users of local area networks

Abstract. Certification is one criterion that employers seek when hiring network professionals. Many employers assume a certified network professional is better able to manage networked resources than is a non-certified counterpart. Therefore, employers often offer a monetary premium to attract certified network professionals. By measuring end-user perceptions, the current study empirically assesses the popular industry assumption that certified network professionals are more adept managers of network resources than those individuals who are not certified network professionals. Analyses of a data derived from 299 end-users of 11 separate local area networks indicate no statistically significant difference exists between the capabilities of certified network professionals and non-certified network professionals.     

网络技术在中州分公司计量管理工作中的应用探讨

本文通过对中州分公司正在考虑建设的信息网建设实际情况，结合山东分公司、广西分公司取得的经验，对计量管理信息网的应用进行了探讨。     

Managing information technology in the nineties

Business, not technology leaders should manage the change of Information Technology (IT) from a self-contained business support unit of the sixties to a distributed strategic business function of the nineties. Top management should recognize that a good business plan can only be developed and executed through the partnership between the business unit managers and the managers of the financial, the personnel, and the IT resource units. The technical problems associated with the management of IT may again be the easier part of the total management challenge.     

从印刷技术的发展看印刷业的重新定位

近20年以来的技术革命使印刷业发生了脱胎换骨的变化，曾经被认为是技术含量低、员工文化素质低、劳动密集型的印刷业已今非昔比。世界上最先进的电子技术、激光技术、计算机技术及网络技术在印刷领域广泛地应用与发展，改变了人们对印刷的传统思维和行为。在信息时代的今天。印刷业已经成为信息社会的先行行业。在新的形势下，印刷业的经营既离不开生产又离不开增值服务，全面解决方案的推行使印刷业的外延扩大到了第三产业。     

微合金化高强度钢轧制采用的工艺技术

本文综述微合金化高强度钢轧制采用的工艺技术，其中包括热装热送、板坯加热、控轧控冷、快速冷却、采用的新设备等工艺技术。重点是生产低碳、高韧性、高强度、易焊接的造船用钢采用形变热处理技术，以提高产量和质量，节省昂贵的Ｎｉ、Ｃｒ、Ｍｏ等合金，降低生产成本。     

钨系延期药预点火反应机理研究

通过程控升温模拟点火条件，根据ＤＳＣ图谱分析，找出主要反应区的温度范围。研究结果表明，钨系延期药预点火反应是一个真正的固－固反应。