Mixing enhancement mechanism of combined H2–Water jets in supersonic crossflows in a combustor with an expanded section

To obtain the mixing enhancement mechanism of H₂–Water combined jets in supersonic crossflows in a combustor with expanded section for rotating detonation ramjet, the flow field shape and spray structure were studied by experimental and numerical methods. The Eulerian–Lagrangian method was used to investigate the diffusion mechanism and H₂–Water interaction law of combined jets with different sequences. At the same time, high-speed photography and the schlieren technique were used to capture the flow field. The effects of jet pressure drop, orifice diameter, orifice spacing, incoming Mach number, and other parameters on the penetration depth of water jets were studied. The results of experiment and simulation show that using H₂–Water combined jets, the penetration depth of the jet spray can be greatly increased and the jet mixing effect can be significantly improved, which will contribute to the engine's ignition and stable combustion. In the case of pre-water/post-H₂, the penetration depth of the hydrogen jet is greater. In the case of pre-H₂/post-water, the hydrogen jet raises the water spray mainly by protecting the integrity of the water column.     

某矿快速掘进最优炮孔间距的选择

山西某矿5308底抽巷在掘进过程中速度慢、效率低，直接影响工作面的瓦斯抽采，为了改善上述情形，对炮孔间距进行研究。通过使用ANSYS软件对不同炮孔间距下快速掘进效果的模拟分析，并经现场验证，得出了适应该矿的最佳炮孔间距。结果表明：炮孔间距为500 mm时，爆破产生裂隙发育范围和岩石损伤区域都最大，快速掘进的效果最好。     

Profiling drunk driving recidivists in Denmark

Drunk drivers are a menace to themselves and to other road users, as drunk driving significantly increases the risk of involvement in road accidents and the probability of severe or fatal injuries. Although injuries and fatalities related to road accidents have decreased in recent decades, the prevalence of drunk driving among drivers killed in road accidents has remained stable, at around 25% or more during the past 10 years. Understanding drunk driving, and in particular, recidivism, is essential for designing effective countermeasures, and accordingly, the present study aims at identifying the differences between non-drunk drivers, drunk driving non-recidivists and drunk driving recidivists with respect to their demographic and socio-economic characteristics, road accident involvement and other traffic and non-traffic-related law violations. This study is based on register-data from Statistics Denmark and includes information from 2008 to 2012 for the entire population, aged 18 or older, of Denmark. The results from univariate and multivariate statistical analyses reveal a five year prevalence of 17% for drunk driving recidivism, and a significant relation between recidivism and the drunk drivers’ gender, age, income, education, receipt of an early retirement pension, household type, and residential area. Moreover, recidivists are found to have a higher involvement in alcohol-related road accidents, as well as other traffic and, in particular, non-traffic-related offences. These findings indicate that drunk driving recidivism is more likely to occur among persons who are in situations of socio-economic disadvantage and marginalisation. Thus, to increase their effectiveness, preventive measures aiming to reduce drunk driving should also address issues related to the general life situations of the drunk driving recidivists that contribute to an increased risk of drunk driving recidivism.     

埋地管道泄漏内封堵装置设计与研究

针对流体输送埋地管道泄漏问题,设计了一种利用管道机器人携带封堵气囊进行快速应急封堵修复的埋地管道泄漏内封堵装置。采用矩阵变换方法建立了牵引系统驱动轮过弯方程,利用MATLAB软件对过弯方程进行了验证,同时利用ADAMS软件仿真分析过弯路径与驱动轮转角对牵引系统行走速度的影响。研究结果表明:由两个串联封堵器组成的应急封堵系统可满足复杂工况下的管道泄漏封堵要求;牵引系统驱动轮在弯管内部行走时,单轮速度呈周期性变化,但三个驱动轮整体周期运动特性一致;驱动轮转角在25°~40°时,牵引系统行走速度与驱动轮转角成正比,且转角为30°时驱动效果最好。该内封堵装置的结构设计可为管道泄漏应急封堵领域装备的研发提供重要参考。     

可调偏迈步式胶带自移机尾的研究

随着掘进工作面自动化程度的提高,掘进巷道速度也在日益加快,而现有的顺槽皮带机机尾移动缓慢且移动时工作量大,需要两三人配合操作,存在一定的安全隐患。针对以上问题,研发可调偏迈步式胶带自移机尾,具有与悬挂二运皮带转载机搭接行程长,可以迈步式前进,自动调偏等功能,同时,可以降低工人的劳动强度,加快巷道掘进速度。     

基于MODBUS协议的激光雕刻切割系统HMI人机交互设备

近年来,国内激光雕刻切割控制器技术发展迅速,基于PC的传统控制器已相当成熟.为了显著提高工业生产效率,适应工业生产规模扩张的需要以及工业对系统稳定性要求的提高,目前国内几家专业运动控制器厂家已经实现了激光雕刻切割控制器的完全脱机运行.本文针对脱机控制器的需要设计一款人机交互设备,该设备采用AT89C55WD单片机为主控制器,采用标准的MODBUS协议实现HMI与脱机控制器的可靠通讯.     

SJ—YⅡ—5型高爆速高威力水胶炸药的研制

文章简要分析了我国目前在中硬岩石爆破中工业炸药的使用情况，介绍了山西兴安化学材料厂新研制的一种适用于硬岩爆破的高爆速、高威力水胶炸药新品种，对其性能、爆破效果、经济实用性和安全性等进行了阐述。     

液压伺服马达拖动研究

液压伺服马达拖动和液压伺服加载 ,目前列为液压技术研究的前缘学科。本文专门从液压伺服马达进行探讨。     

钢缆带式输送机驱动轮的更换方法

钢缆带式输送机在长期使用过程中 ,它的驱动轮轴承以及齿轮联轴器都要磨损 ,最终导致磨损超标。为了保证设备运行安全 ,必须解决它的更换问题。针对这一问题 ,介绍了运用松驰牵引钢丝绳的方法 ,实现了不截断牵引钢丝绳进行驱动轮的整体更换 ,通过对平煤集团一矿 4个驱动轮的更换 ,证明这种方法简便易行 ,安全可靠。     

基于PMM8731和SI-7300的步进电机驱动电路

PMM8731是日本三洋电机公司生产的步进电机脉冲分配器。而SI-7300则是日本三青公司生产的高性能步进电机集成功率放大器。它们和单片机一起可构成一种高效电机控制驱动电路。文中介绍了PMM8713与SI-7300的功能 ,给出了由它们组成的功率驱动电路及其在步进电机上的应用方法