低电压氧化锌压敏电阻器的研究

研究了一种制造低电电压氧化锌压敏电阻器的方法。在基本成分的基础上适当加入二氧化钛可降低梯度电压（Ｖ１ｍＡ／ｍｍ），适量掺硼和改进热处理工艺可减小元件的漏电流和提高其稳定性。     

从第八次全国热处理大会看我国热处理技术发展的热点

对第八次全国热处理大会的大会报告和交流论文进行了概述和分析，并就有关我国热处理技术发展的热点问题提出了笔者的一些见解。     

Corrosion of metals and alloys in mixed gas environments at elevated temperatures

The attack of nickel, cobalt, iron, and alloys of these metals containing chromium and aluminum, by gases containing sulfur-oxygen, carbon-oxygen, and nitrogen-oxygen has been studied at temperatures of 600 and 900°C. The degradation of these metals and alloys was characterized by using standard analytical techniques with emphasis on optical metallography. Three types of accelerated degradation were identified for the attack of alloys by gases containing another oxidant in addition to oxygen. One type of degradation occurred because of the formation of reaction products composed of mixtures of phases involving both of the oxidants. Another type resulted from the reaction of second oxidant phases with oxygen. The third form of degradation involved the development of less protective phases due to thermodynamic instabilities. Thermodynamic stability diagrams are used to help account for the effects produced by different elements in the alloys.     

Strengthening technology and mechanism for semi-solid die casting of aluminum alloy

Combined with theoretical evaluation,an optimized strengthening process for the semi-solid die castings of A356 aluminum alloy was obtained by studying the mechanical properties of castings solution treated and aged under different conditions in detail,then,the semi-solid die castings and liquid die castings were heat treated with the optimized process.The results show that the mechanical properties of semi-solid die castings of aluminum alloy are superior to those of the liquid die castings,especially the strengthening degree of heat treated semi-solid die castingsis much greater than that of liquid die castings with the tensile strength more than 330 MPa and the elongation more than 10％,and this is mainly contributed to the non-dendritic and more compact microstructure of semi-solid die castings.The strengthening mechanism of heat treatment for the semi-solid die castings of A356 aluminum alloy is due to the dispersive precipitation of the second phase(Mg2 Si) and formation of GP Zone.     

氰化氢在终冷塔中气液两相之间转移的研究

分析了煤气中氰化氢的形成,论述了氰化氢在煤气和其冷凝液中的平衡机理,讨论了影响氰化氢相平衡的因素,研究了直接终冷、间接终冷时煤气中氰化氢的转移情况。     

黄金冶炼厂污染源治理技术

本文阐述了采用加温加压无氰解吸、金电解精炼，活性炭酸洗、火法再生产工艺，所产生污染物的治理技术。     

换热器表面预处理及防腐工艺

石化换热器许多设备都由碳钢制作,需要涂镀渗防腐,为保证防腐层质量,需要进行严格的表面预处理。概述了机械与化学表面预处理及相关的防腐工艺。     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

纺牵—步法中粗旦丙纶长丝沸水收缩率初探

在纺牵联合一步法纺丝机上研究了丙纶切片的熔融指数对纤维沸水收缩率的影响，发现熔融指数高的切片，其纤维的沸水收缩率变化大。沸水收缩率随热定型的温度升高而下降。沸水收缩率可根据用户提供中心值（Ｍ）通过实验确定，一般以Ｍ±１．５为宜。     

二氯苯系列产物的气相色谱分析

介绍了在相同条件下分析对二氯苯、邻二氯苯、间二氯苯、1，2，4-三氯苯和氯化苯的气相色谱法。该法采用灵敏度为10^8的1002气相色谱仪或其它类似色谱仪、氢火焰离子化检测器，在选择有机皂土和己二酸乙二醇酯混合固定相(有机皂土：6201担体=5：100；己二酸乙二醇酯：6201担体=5：100)的质量比为(1．6～1．7)：1时，能够有效地分离上述几种组分，从而可以对上述组分进行同时分析。其检出限在10^-6～10^-7之间,线性范围在10^-6～10^-3之间，便于产品检验和环境监测。