Evaluating the mixing performance of a ribbon blender

This paper investigates the effects of processing and equipment parameters of a ribbon blender (i.e. loading method of lubricant, fill level, blade speed and blade design) on magnesium stearate homogeneity. A core sampling technique is used to obtain at least one hundred samples per sampling event, which are extracted throughout the blender and yield a thorough characterization of the entire bed. The results presented here can be used as a guideline to develop appropriate blending processes and characterization protocols for ribbon blenders.     

Stabilization of inter-area and/or oscillatory modes in large-scale power system by voltage impedance power system (VIPS) apparatus based on decentralized control scheme

New technologies such as power electronics have made it possible to change continuously the impedance of a power system not only to control power flow but also to enhance stability. A power system incorporating a variable impedance apparatus such as a variable series capacitor (VSrC) and high-speed phase shifter (HSPS) is called VIPS (Variable Impedance Power System) by the authors. This paper proposes a novel control method of VIPS apparatus such as VSrC and HSPS installed at an interconnecting point for stabilizing inter-area unstable and/or oscillatory modes. The proposed design method of the control system is a kind of hierarchical decentralized control method of a large-scale power system based on a Lyapunov function. Under the proposed control scheme, each subsystem can be stabilized independently by local controllers such as AVR, speed governor and PSS, and then the whole interconnected system can be stabilized by VIPS apparatus taking into account interactions between subsystems. The effectiveness and robustness of the VIPS apparatus control are shown by numerical examples with model systems including a large-scale power system.     

高速线材轧机锥套故障分析与改进

高速线材生产线精轧机、预精轧机使用的锥套，在材质、结构、处理工艺及生产操作上存在诸多不当之处，为此进行了多项改进，使锥套故障彻底排除，使用寿命达3～5月，而价格仅为进口件的1／3。     

Leaded brass rods C 38500 for automatic machining operations: A technical report

C 38500 is a widely used copper alloy with a great variety of applications from decoration and architecture to mechanical/electrical engineering. The chemical composition of this alloy offers superior machinability and subsequently increased productivity in high-speed machining and manufacturing processes. In European countries, this alloy is used primarily as free cutting brass (CW 614N according to EN 12164: 1998), similar to C 36000 alloy, which is used also for thread rolling. The lower percentage of Cu compared to C 36000 (nominal 58% instead of 61%) decreases the cost of the raw materials. This paper reports the principal aspects of microstructure, mechanical properties, and machinability of this alloy in relation to the industrial manufacturing process used.     

高线粗中轧机"浮动"检测结构设计及故障排除

为克服轧制中因机架锁紧功能降低而产生的机架沿轨座轴向移动的"浮动"现象,对其产生原因进行了分析,并通过改进锁紧装置结构及相关部件,使"浮动"故障得到预防和有效控制并及时排除。     

高线精轧机平衡缸漏油分析及改进

分析了广州钢铁企业集团公司高线厂精轧机平衡油缸漏油的危害和原因，指出了这种油缸在设计上存在的缺陷，并提出了改进措施，改进后漏油问题得到了解决。     

高速网络Fast TCP拥塞控制算法的改进

随着网络技术的飞速发展和接入性能的不断提高,如今全世界的互联主干网络呈现出一种高速网络的特性。在这种网络特性下,传统网络中的TCP拥塞控制协议已经开始显现出不适应性,发现了FAST TCP协议中＂持续拥塞＂的形成机制,建立了数学模型来准确的描述＂持续拥塞＂所导致数据流之间带宽分配不公平的问题,进一步利用优先服务队列的方法解决了FAST TCP在网络中的持续拥塞现象。     

用于高速列车移动网络的资源分配实时算法

误码率高、频繁中断的高速列车移动场景宜采用多宿主容迟网络。但其资源分配计算复杂,实时性较差。基于效用差分法设计初始化过程资源分配算法,以保证过程中每一步的效用单调不减,算法时间复杂度降至O(n)。     

合肥城市高速铁路走向研究

高速铁路已成为区域大城市之间联系的重要纽带.高速铁路市区段的建设对城市的发展将产生深远影响.基于合肥城市发展的特征,重点从城市空间结构的视角,对合肥城市高速铁路走向进行多方案比较研究,并提出适宜的方案.进而指出,高速铁路市区段的选线应与城市规划相协调,引导城市良好空问结构的形成.     

基于PCI总线的高速大容量数据采集卡

介绍了一种基于PCI总线的高速大容量数据采集卡的设计原理与实现。该采集卡由预处理电路、A／D转换器、同步动态随机存储器(SDRAM)、高频时钟发生器、集成于FPGA芯片的PCI接口控制器和SDRAM控制器组成。它通过PCI总线接口与计算机连接，可完成400MHz／s实时数据采集、512MB实时数据存储。