激光辐照对不同饵料微藻生长的影响

利用Nd:YAG激光(波长1.06μm,功率5W,照射时间0.5-3min)和Ar 激光(波长:488nm,功率70mw,照射时间5-20min)分别照射角毛藻和叉鞭金藻,辐照后进行细胞增殖和生长速率的测定。实验结果表明:照射剂量为1min的Nd:YAG激光及剂量为5min的Ar 激光对叉鞭金藻有较明显的促长效果,这两种激光处理组的细胞增殖量在辐照后的两天内较对照组分别高42.9%和48.1%,但这种促长效果随时间的推移逐渐消失。不同剂量的两种激光辐照角毛藻后,在延滞期均出现生长抑制现象,但进入指数生长期或传代培养后,剂量为1min的Nd:YAG激光及剂量为10min的Ar 激光对角毛藻有明显的促长效果,其中在指数生长期1min剂量的Nd:YAG激光处理可促长27.0%,传代培养后10min的Ar 激光处理组生长速率提高达51.2%。本文对不同激光及不同激光参数条件下,两种饵料藻的耐受性及生长特性的差异也进行分析探讨。本实验结果不仅证实了已有研究的推论,还展示出激光技术在饵料藻种选育中的应用前景。     

Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

Validation of a Method of Determination of Apparent Diffusivity Versus Composition in Solids

A method is presented for computing the values of apparent diffusivity in solids with respect to the concentration of the diffusing substance (water or sodium chloride). This method does not require any assumption upon the mathematical relationship between diffusivity and concentration. It can be applied to experimental measurements of local concentration versus position within the solid (profiles) with relatively few measurements (circa 10) and a mathematical smoothing of the experimental data by using an artificial neural network model. The method was first validated on simulated data obtained by using a constant diffusivity value and on experimental profiles when the relation between diffusivity and concentration was given. It was then applied to original experimental moisture profiles obtained by putting gelatin gels with different initial moisture contents into contact for up to 14 days. The method was also successfully applied to five sets of experimental moisture and sodium chloride profiles taken from the literature and obtained from different food products. Apparent diffusivities calculated by our method were found in agreement with those obtained by authors using different numerical methods to compute the diffusivity values.     

Enhanced Image Detection on an ARM based Embedded System

This paper presents a new technique for thedetection of Integrated Circuits within images of Printed Circuit Boards autonomouslyand without the need to be assisted by CAD data. The technique is a key partof a suite of algorithms targeted for an embedded System On Chip architecturebased on the ARM7 platform for real time detection of PCB images for diagnosticpurposes. The technique has a significant reduction in complexity when comparedto conventional approaches such as the Hough Transform. The reduction in complexitymakes the approach ideal for an embedded vision application suchas the one described in this paper. This paper presents the technique, thetarget embedded architecture and results showing the reduction in complexitywhen compared to a Hough Transform.     

Micro-RBS characterisation of the chemical composition and particulate deposition on pulsed laser deposited Si1−xGex thin films

The formation and deposition of particulates by pulsed laser deposition of Si_1−xGe_x semiconductor alloy thin films are discussed. Using Rutherford backscattering spectrometry with micrometer lateral resolution (micro-RBS) the film composition was measured with high accuracy, even in the presence of particulates with a high areal density of 20,000–30,000 particulates per mm². We show that on impact of a particulate, the part of the thin film which is already deposited probably melts and its Ge content segregates to the surface.     

The time course of plausibility effects on eye movements in reading: Evidence from noun-noun compounds.

Readers' eye movements were monitored as they read sentences containing noun-noun compounds that varied in frequency (e.g., elevator mechanic, mountain lion). The left constituent of the compound was either plausible or implausible as a head noun at the point at which it appeared, whereas the compound as a whole was always plausible. When the head noun analysis of the left constituent was implausible, reading times on this word were inflated, beginning with the first fixation. This finding is consistent with previous demonstrations of very rapid effects of plausibility on eye movements. Compound frequency did not modulate the plausibility effect, and all disruption was resolved by the time readers' eyes moved to the next word. These findings suggest (contra Kennison, 2005) that the parser initially analyzes a singular noun as a head instead of a modifier. In addition, the findings confirm that the very rapid effect of plausibility on eye movements is not due to strategic factors, because in the present experiment, unlike in previous demonstrations, this effect appeared in sentences that were globally plausible. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Progress toward roll-to-roll processing of inorganic monolithic electrochromic devices on polymeric substrates

As electrochromic device (ECD) emerges into the market, the necessity of cost reduction via high-throughput manufacturing is unavoidable. Inorganic monolithic ECD has compatibility in its manufacturing steps, allows continuous processing and hence low-cost ECD. A roll-to-roll (R2R) production is the industrial standard for high-throughput processing and was chosen to synthesize ECD on polymeric substrates. Preliminary success by implementing methods compatible to the aforementioned R2R processing has been achieved; however, continuous test-runs on an R2R machine are still limited.     

Excel在大学物理实验中的应用

利用Excel的强大功能，对实验数据进行处理、分析，对实验过程及实验结果的监控。     

基于高抗热震性能的陶瓷刀具材料的微观结构设计

本文以现有的抗热震断裂和抗热震损伤的评价理论为基础，通过对材料中微裂纹的长度进行预测，从而实现了对陶瓷刀具材料的抗热震性能的微观结构设计。根据此理论对现有材料的抗热震性能的进行预测，预测结果与实际的测量结果相符，验证了该理论的正确性。     

Individual differences in self-assessed health: An information-processing investigation of health and illness cognition.

In 2 studies, the relation between measures of self-assessed health (SAH) and automatic processing of health-relevant information was investigated. In Study 1, 84 male and 86 female undergraduate students completed a modified Stroop task. Results indicated that participants with poorer SAH showed enhanced interference effects for illness versus non-illness words. In Study 2, 27 male and 30 female undergraduate students completed a self-referent encoding task. Results offered a conceptual replication and extension of Study 1 by confirming the specificity of the relation between SAH measures and automatic processing of health (vs negative or positive general trait) information. These studies provide evidence that individual differences in SAH are reflected in schematic processing of health-relevant information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)