用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量

本文主要简述与运用AIR-C2H2原子吸收光谱法进行镉镍电池正极浸渍液中钴含量的测定，介绍了钴最佳测定条件及呈良好线性范围的浓度。同时对样品消化处理条件，在测定中样品的干扰因素进行了综合考虑，该方法具有很好的灵敏度，很好的重复性，干扰小，同时具有方法步骤简单，操作容易掌握等特点，对样品钴含量的测定，其相对标准偏差均小于1.0%（n=6），标准加入回收率均在97.0%～102.0%(n=5）范围内，结果表明，运用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量的分析，达到了实验室分析质量控制的要求，完全适用于镉镍电池正极浸渍液中钴含量的控制分析和样品系统分析。     

交联型聚醚聚氨酯的表征、力学性能及其碱金属盐络合物的导电性能

采用三羟甲基丙烷（ＴＭＰ）作交联剂与聚乙二醇（ＰＥＯ－１５４０）和甲苯二异氰酸酯（ＴＤＩ）反应，得到了具有较好力学性能的交联型聚醚聚氨酯（ＰＥＵ），该聚合物与ＬｉＣｌＯ４的结合物具有较高的室温电导率（σ３０℃＝１．８７×１０￣（－４）Ｓ／ｃｍ）。采用全反射红外光谱（ＡＴＲ－ＩＲ）对聚合物的结构进行了表征。对聚合物的组成、不同ＴＤＩ类型及络合盐浓度对聚合物力学性能及其络合物电导率的影响进行了探讨。低度交联聚合物的络合物，其电导率与温度的关系符合建立在自由体积理论上的ＶＴＦ方程，表明络合物中离子的传导主要是在无定形区域进行，与自由体积有关。     

Direct Methods Optimised for Solving Crystal Structure by Powder Diffraction Data: Limits,Strategies, and Prospects

The ab-initio crystal structure solution by powder diffraction data requires great efforts because of the collapse of the experimental information onto the one dimensional 2θ axis of the pattern. Different strategies will be described aiming at improving the process of extraction of the integrated intensities from the experimental pattern in order to make more straightforward the structure solution process by direct methods. Particular attention will be devoted to the EXPO program. Some of its performance will be analysed and results will be shown.     

苯部分加氢催化剂失活原因的研究

探讨了环己醇装置苯部分加氢催化剂失活的原因，分析了失活机理，并结合实例——母液置换法解决催化剂的氮化物中毒。     

卤素置换反应用氯化锌催化剂的再生

研究了用于催化卤素置换反应后的氯化锌催化剂的再生方法。其过程包括：用石灰乳中和，沉淀出氢氧化锌，用氢氧化锌中和氯化锌废液至pH值为5—6，通入氯气氧化氯化锌废液中的有机物，蒸发至必要的浓度。     

Water‐soluble/dispersible cationic pressure‐sensitive adhesives. I. Adhesives from solution polymerization

Pressure‐sensitive adhesives (PSAs) have long been a problem as sticky contaminants for paper recycling mills. The main problem associated with such stickies is that the PSAs in the waste papers deposit on the felts, press rolls, and drying cylinders of paper machines, and this creates problems with paper formation, reducing the paper quality and paper machine runnability. The annual cost of stickies to the U.S. paper industry is estimated to be about $600,000,000–650,000,000. To solve this problem, a series of cationic water‐soluble/dispersible PSAs have been synthesized by the free‐radical solution polymerization of butyl acrylate and [3‐(methacryloylamino)propyl]trimethylammonium chloride in ethanol. The PSA end‐use properties, repulpability in paper recycling, and the effects on the properties of recycled paper products have been studied. The cationic PSAs can be dissolved or dispersed in water if the cationic charge density in the PSA backbone is controlled, and so they do not deposit as stickies during recycling and papermaking processes. Because the PSAs are cationically charged, they can easily be removed from the papermaking system by adsorption onto the negatively charged fibers and fine surfaces. Furthermore, the adsorbed colloidal or dissolved PSAs have little effect on the final paper properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1624–1630, 2003     

Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

Synthesizing plans that contain actions with context-dependent effects1

This paper presents a method of solving planning problems that involve actions whose effects change according to the situations in which they are performed. The approach is an extension of the conventional planning methodology in which plans are constructed through an iterative process of scanning for goals that are not yet satisfied, inserting actions to achieve them, and introducing subgoals to these actions. This methodology was originally developed under the assumption that one would be dealing exclusively with actions that produce the same effects in every situation. The extension involves introducing additional subgoals to actions above and beyond the preconditions of execution normally introduced. These additional subgoals, called secondary preconditions, ensure that the actions are performed in contexts conducive to producing the effects we desire. This paper defines and analyzes secondary preconditions from a mathematically rigorous standpoint and demonstrates how they can be derived from regression operators.     

基于AutoCAD2000的图解法确定工艺转角

提出了基于AutoCAD2 0 0 0的图解法求解机械加工过程中工艺转角的问题 ,并针对具体的应用实例给出了圆满的解答 ,并验证了其精度。     

Boussinesq方程的永形波的级数解

对于用层平均速度势(或速度)与波高给出的非线性等水深Boussinesq方程,与KdV方程一样,存在两类永形波—孤立波和周期波。不同的是,对于Boussinesq方程,孤立波和周期波一样,是以反函数的积分形式给出的,这在使用上是不方便的。本文对这两类波,分别给出了相应的级数形式的正函数解。对于孤立波,级数的收敛速度是十分快的,且文中还给出了一个具有高精度的十分简单的近似解,对于周期波,只要有关参数选得合适,解的收敛速度也是相当快的。这就有效地克服了反函数形式解在使用上的不方便。