AlF3贮仓料位计在线监控系统开发与应用

针对铝电解原材料中AlF3与Al2O3自动配料不准和难于观察及控制的现象，我厂开发应用了AlF3贮仓料位计，并与微机网络相连，实现了远程测量与在线监控，使AlF3配料更准确更均匀，电解质分子比更稳定，电解槽生产低耗高效。     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

窑炉用热电阻、热电偶智能温度测量板的设计

温度是影响陶瓷烧成质量的关键因素,介绍了一种适用于测量各种窑炉不同部位温度的智能温度测量板,由于该系统在不同的测温部位分别采用了热电阻和热电偶,克服了一般测温系统在连接不同的测温传感器需要更换不同的测温模板、成本高、使用不方便等不足,并具有适用性强、测温精度高等优点。     

利用ADCP回波强度估算河流悬移质含沙量的应用研究

通过简要介绍利用声学多普勒水流剖面仪(ADCP)回波强度估算悬移质含沙量的基本原理,结合梧州水文站的应用实例,利用ADCP的回波强度数据和现场采集的水样含沙量建立相关关系,根据相关关系由回波强度反演估算的水体悬移质含沙量验证了利用ADCP的回波强度估算悬移质含沙量的可行性。应用于梧州水文站的实践表明,左河道推算的系统误差为-0.1%,右河道推算的系统误差为1.5%。这种方法具有不扰动流场、测量剖面同步性较好、数据空间分辨率较高的优点,与传统的取样过滤称量法相比,计算效率显著提高。     

Proposal of a uniform color scale for virgin olive oils

A new color scale was developed from a broad data set of 1700 virgin olive oil samples over four crop seasons, which can be considered highly representative of the whole color range of virgin olive oils available in Spain. This color scale provides a new set of 60 color standards, improving the results achieved by the old 60-color standards proposed by the bromthymol blue method. Seeking the greatest possibility of including a near match between colors of virgin olive oils and proposed standards, we developed our new color scale using a recent uniform color space, with standards placed in a regular rhombohedral lattice like the one employed by the Uniform Color Scales of the Optical Society of America. The average color difference between each of the 1700 virgin olive oils and its nearest standard is reduced from 8.17 CIELAB units, using the bromthymol blue standards, to 3.99 CIELAB units using the new standards. Within a color tolerance of 7.0 CIELAB units, 93.2% of our virgin olive oils can be classified with the new standards, but only 59.1% with the bromthymol blue ones. In the interest of future adoption, the performance of the new color standards should be tested by industry and researchers.     

直流电桥法测量电缆故障点的距离

迅速、准确地探测故障点的位置对保证故障电缆的及时修复有着重要意义。介绍了电缆故障的性质和直流电桥法测量电缆故障点距离的原理，着重阐述了几种常用的电缆接地故障的测量方法，并提出在实际生产、施工中，应根据具体情况选取合理的仪器及测量方法，迅速、准确地探测故障点的位置，以保证故障电缆的及时修复。     

The voidage function and effective drag force for fluidized beds

Here, an experimental investigation on the effective drag force in a conventional fluidized bed is presented. Two beds of different particle size distribution belonging to group B and group B/D powders were fluidized in air in a diameter column. The drag force on a particle has been calculated based on the measurement of particle velocity and concentration during pulse gas tests, using twin-plane electrical capacitance tomography. The validity of the voidage function “correction function”, (1−ε_s)ⁿ, for the reliable estimation of the effective drag force has been investigated. The parameter n shows substantial dependence on the relative particle Reynolds number , and the spatial variation of the effective static and hydrodynamic forces. It is also illustrated that, a simple correlation for the effective drag coefficient as function of the particle Reynolds number (Re_p), expressed implicitly in terms of the interstitial gas velocity, can serve in estimating the effective drag force in a real fluidization process. Analysis shows that, the calculated drag force is comparable to the particle weight, which enables a better understanding of the particle dynamics, and the degree of spatial segregation in a multi-sized particle bed mixture. The analogy presented in this paper could be extended to obtain a generalized correlation for the effective drag coefficient in a fluidized bed in terms of Re_p and the particle physical properties.     

A High-Precision Time Handling Library

An appropriate assessment of end-to-end network performance presumes highly efficient time tracking and measurement with precise time control of the stopping and resuming of program operation. In this paper, a novel approach to solving the problems of highly efficient and precise time measurements on PC-platforms and on ARM-architectures is proposed. A new unified High Performance Timer and a corresponding software library offer a unified interface to the known time counters and automatically identify the fastest and most reliable time source, available in the user space of a computing system. The research is focused on developing an approach of unified time acquisition from the PC hardware and accordingly substituting the common way of getting the time value through Linux system calls. The presented approach provides a much faster means of obtaining the time values with a nanosecond precision than by using conventional means. Moreover, it is capable of handling the sequential time value, precise sleep functions and process resuming. This ability means the reduction of wasting computer resources during the execution of a sleeping process from 100% （busy-wait） to 1-1.5%, whereas the benefits of very accurate process resuming times on long waits are maintained.