换热器表面预处理及防腐工艺

石化换热器许多设备都由碳钢制作,需要涂镀渗防腐,为保证防腐层质量,需要进行严格的表面预处理。概述了机械与化学表面预处理及相关的防腐工艺。     

Kynar—500涂装工艺与涂层性能研究

介绍了Kynar－500涂料的涂装工艺，并对涂层的性能作了试验与分析。     

聚氨酯防水涂料及其市场发展概况

聚氨酯防水涂料是当今最有效的柔性防水材料之一，介绍了聚氨酯防水涂料的发展状况，并对其市场前景进行了展望。     

粉末涂料涂装工艺(Ⅰ)

介绍了粉末涂料的几种涂装方法及其原理、特点、应用范围和进展情况，重点介绍了静电粉末涂装方法。     

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.     

采用表面粘涂技术提高设备的抗腐蚀性能

通过表面粘涂，对受到腐蚀、冲蚀、气蚀的设备进行表面修补与防护，可提高设备的使用寿命。     

Transformation of β-Ni(OH)2 to NiO nano-sheets via surface nanocrystalline zirconia coating: Shape and size retention

Shape and size of the synthesized NiO nano-sheets were retained during transformation of sheet-like β-Ni(OH)₂ to NiO at elevated temperatures via nano-sized zirconia coating on the surface of β-Ni(OH)₂. The average grain size was 6.42 nm after 600 °C treatment and slightly increased to 10 nm after 1000 °C treatment, showing effective sintering retardation between NiO nano-sheets. The excellent thermal stability revealed potential application at elevated temperatures, especially for high temperature catalysts and solid-state electrochemical devices.     

Phosphorus seed coating increases phosphorus uptake,early growth and yield of pearl millet (Pennisetum glaucum (L.) R. Br.) grown on an acid sandy soil in Niger,West Africa

In pot and field experiments conducted in 1990 and 1991 on an acid sandy, phosphorus (P) deficient soil in Niger, West Africa, the effect of seed coating on seedling emergence, early growth and grain yield of pearl millet (Pennisetum glaucum (L.) R. Br.) was studied. Seeds of pearl millet were coated with different rates (0; 0.5; 1.0; 2.0; 5.0; 10.0 mg P seed^–1) and types of P fertilizers (single superphosphate, ammonium dihydrogen phosphate; monocalcium phosphate, sodium dihydrogen phosphate and sodium triphosphate). Seedling emergence was generally reduced at coating rates higher than 0.5 mg P seed^–1 and prevented with single superphosphate and sodium triphosphate at rates higher than 5 mg P seed^–1. No correlation was found between the pH and osmomolity of the coatings and final emergence of millet seedlings. The most favourable effect on plant growth and P content was achieved with ammonium dihydrogen phosphate (AHP) as seed coating. This was attributed to the enhancement effect of ammonium on P uptake. Compared to the untreated control dry matter production at 20 days after planting (DAP) was increased by 280%, P content per plant by 330%, total biomass at maturity by 30% and grain yield by 45%. Although seed coating with AHP may be harmful to seedlings emergence, it represents a suitable method to enhance early growth and increase yield of pearl millet.     

Catalytic activities and properties of mesoporous sulfated Al2O3–ZrO2

Mesoporous sulfated Al₂O₃–ZrO₂ (MSAZ) catalysts with large surface areas and pore volumes after calcination at high temperature (650 °C) and with higher Al₂O₃ content than 20wt% were successfully prepared from a template of block copolymer (P84). The MSAZ catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption, transmission electron microscopy (TEM), ²⁷Al magic-angle spinning nuclear magnetic resonance (MAS NMR), thermogravimetric analysis (TG–DTG), temperature-programmed desorption of ammonia (NH₃-TPD) and infrared spectra (IR) of adsorbed pyridine. It is shown that the resulting mesostructured sulfated Al₂O₃–ZrO₂ samples have a well-developed textural mesoporosity. The number of acid sites present on MSAZ catalysts is higher than that on conventional sulfated zirconia, and the former catalysts are more active than the latter one for various acid-catalyzed reactions.     

ATO包裹硅酸锆的制备与应用

采用化学共沉淀技术制备了锑掺杂二氧化锡(ATO)包裹硅酸锆的导电粉体,对比了该导电粉体与ATO在防静电陶瓷中的应用效果。结果表明与掺纯ATO相比较,掺入ATO包裹硅酸锆的防静电陶瓷颜色比较浅,并且能明显减少氧化锡的用量,当陶瓷的表面电阻为107Ω/□量级时,用ATO包裹硅酸锆作为导电填料可以节省25%左右的ATO。